+1
Whitelist would be great.

Some experiment with the wifi standards (Mikrotik: "Band"): * Using the setting "n" => Even my latest devices connect only with 802.11n * Using the setting "ax" => Latest devices connect with 802.11ax, older devices connect with lower standards (e.g. iMac from 2017 whic...

This is quite old but I had the same situation and finally found out what was wrong (in my case). My Cap was also set to certificate=request and after a while I found out that this was causing the issue. Looking at the detailed Caps Log on the CAPsMan it showed that the CAPsMan could not generate a ...

+1
for a long time now

Its only on the first sight that the bridges seem to have only one interface. CAPsMAN adds the WLAN interfaces dynamically: /caps-man configuration add channel.band=2ghz-b/g/n channel.extension-channel=Ce channel.frequency=\ 2417 channel.width=20 country=germany datapath.arp=enabled \ datapath.bridg...

Not sure you are still working on in. Just in case I post my complete test config. I noted several differences to the config above. It took me quite a while until everything was working as expected. But I was not familiar with MT, at all. So there might be lots of room for improvement. Just let me k...

Am I alone with the issue of masterport not working when vlan is configured? No you are not... But I somehow got it solved thanks to you :) In my config I could not access any untagged port. When I read through this thread I realised that I had multiple master-ports in my former config. I resolved ...