I don't know is it possible to dstnat/re-route the multiple virtual host (IP > DNS Settings > DNS Static) that actually has 1 public IP to multiple internal ips. Might Not load balancing (not similar to haproxy since HAProxy only for web services), but more to routing. Example, if User open web brow...

Hi, Good day everyone. I have 1 single PPPoE account with multiple WAN IPs, that connected to ISP (use PPPoE server to have the internet and public ips). I need to setup something similar to this, but I am not sure is it possible or not because whenever I set public IP manually to Mikrotik B & C...

thanks.. solved

I have server (CentOS) that gather all the active blacklisted IPs (most of the time that attempt SSH logins/spamhaus/RBL listed/etc.) and I have the blacklist.php that will generate that blacklisted IPs the hosted under Apache+PHP. What I am going to do is, that blacklist.php will generate all the M...

i was thinking about changing to VLANs method, but problem is, these Router A, Router B & Router C devices doesnt support VLAN.. and the clients also probably not use VLAN to connect to the RB4011.. anyway, i attach the diagram how I wanting to setup.. when I tested and connect the laptop direct...

Im using RB4011iGS+RM However, I planned to route different bridge to different route. I have 3 routes/Gateways connected to different ISPs (ISP A, ISP B, ISP C) through LAN.. and clients from range: - IP 10.10.10.1/24 connected to route A (ISP A) through bridge-client1 - IP 10.10.11.1/24 connected ...

Howdy, I able to ping/traffic the connected VPN clients (10.30.51.0/16) to any LAN devices (10.30.11.0/16), however LAN devices unable to ping/traffic the VPN clients. The VPN client and LAN route the same gateway (WAN) and both connected to the same internet (pppoe-unifi). I plan to make both able ...

Hi,

How do I allow traffic forwarding from VPN Client A to VPN Client B through VPN Server?

i.e:
1) I'm using PC VPN Client A, able to pinging to PC VPN Client B.
2) I'm using PC VPN Client A, able to access to any opened ports hosted by PC VPN Client B.

just found out that there's no unwatch button for topic (1st photo), however post has the button (subs/unsub) (2nd photo).

so, anyone has a sample config how to solve this yet so that the TiK can achieve the expected speeds (ie should be 800mbps at 800mbps ISP internet plan but physically still stucked at 60-130mbps)?

Sent from my CPH1819 using Tapatalk

Is it possible to do like this? If so, how to do so? Mikrotik at eth1 (192.168.0.2/24) connected to Router A (ISP A) Mikrotik at eth2 (192.168.1.2/24) connected to Router B (ISP B) PC A route to DHCP Network A at subnet 24 via eth3. PC B route to DHCP Network B at subnet 24 via eth4. Both DHCP and r...

why not just route: just connect to .1.10/11 address? gateway of 0.100 is 0.1 = Tik right? and Tik knows how to get to 1.1x... never tried route both gateways/afraid both will have conflicts due differences of ISPs for both gateway, in other word, 192.168.0.1/24 route to public ip A (ISP A), 192.16...

Hi, I have 1 PC (192.168.0.100) connected to 1 mikrotik device (192.168.0.1/24) at ether2. Then 2 servers which: - Web Server A (192.168.1.10) connected to same mikrotik device (192.168.1.1/24) at ether3. - Web Server B (192.168.1.11) connected to same mikrotik device (192.168.1.1/24) at ether3. So,...

Can anyone share best tips/configurations for RB2011UiAS-RM able to get 1GBps? We have internet speeds D/U at 1GBps with Cat6 installed from ASUS RT-AC66U link to to RB2011UiAS-RM's WAN eth1 then from rb2011UiAS-RM LAN eth2-5 to all the 4 PCs, but... sadly, when I do the speedtest, I just received 2...

Well your explanation is a bit fuzzy. A diagram would have helped. Also helpful at a certain point to post config /export hide=sensitive file=mylatestconfig However you want to know if the MT router can route traffic internally between vlans. The answer is YES just need the appropriate firewall fil...

Assuming that my PC (10.30.11.50/24) is connected to the Mikrotik at bridge-lan1 (10.30.11.1/24), but there's another bridge that my PC unable to connect to, known bridge-lan2 (192.168.0.1/24) where only servers are able to connect to that internal network (where it is bridge-lan2) via hub. So I hav...

may i know how did you solve these?

With your setup, I would have setup the link between the router as an own net (lan C) So Lan A have a route to Lan C on the Left router and Lan C has a route to Lan B on the right side. also possible, but i dont know what commands should i apply to allow them communicating to each other. can u post...

It is better to post the picture in the site.
Then the picture would stay in the forum.
For some reason adblock in google removes the site you are using.

screenshot_316.jpg

thnx for reminding. updated the post with attachment included.

Can you post your firewall rules as is............ theres no filter rules/NAT for now.. everything is empty and reset. but the idea diagram is like below: http://pub.haztech.com.my/screenshot.316.jpg The problem is, the Router A need to be configured, which there's no filter rules/NAT at the moment...

If you have explicit drop all else forward rules, they will not talk and you would have to make explicit rules to allow this routing (my preference).
allow lan 1 to lan 2
allow lan2 to lan 1

Its okay. Anyway, how do I apply this? I have no idea doing these in IP>firewall

Exactly. Router by default route all networks together (routing = L3 forwarding). If you bridge it together, it is same as if you plug both ports straight into same switch and then put all clients on the switch as well - it will be mess, right? /ip firewall nat add chain=srcnat action=src-nat to-ad...

"bridge" is L2 feature. You can imagine it as switch with some enhanced abilities to filter/translate data. That means everything will pass through including DHCP requests and responses. You don't want that as you described want two separate LAN, each with own DHCP server. As long as ther...

Put both on the same bridge (by the way only need one masquerade rule if you only have one WAN interface). By both being on the same bridge they will be routable by the router. To explicitly connect them, ensure firewall rules allow it especially if you have drop else rule at the end of the forward...

Hello, I have this setup: - Router A ETH2 = 10.30.14.0/24 with DHCP server A for router A, connecting to WAN-A - Router B ETH2 = 10.30.13.0/24 with DHCP server B for router B, connecting to WAN-B. What i'm planning/going to do is: - Clients on Router A will get 10.30.14.0/24 IP addresses & netwo...

yep, have to access from internet for backup-solution purposes.. normally i connect through PPTP but incase some "gateway/pptp ip/intranet" down, i have to use the public ip.. just wondering, how about if I change the services ports (22, 23, 8192) to the new ports (2222, 2223, 18192), is i...

Hello,

How to block unknown logins (specific IP) from the internet to my winbox, telnet & ssh. This ip (118.101.53.152) keep retrying/brute force to login my routerOS since last week till now.

Thanks,

Best regards,
Marhazk

I have PPTP Client on Mikrotik that connected to the internet on WAN ip (125.x.x.x). The PPTP client in the Mikrotik is successfully connected to my PPTP Server on internet CentOS Linux, WAN IP (128.x.x.x) .....BUT, the Mikrotik's WAN ip still return 125.x.x.x. How do I change my Mikrotik's WAN IP t...