Please I need help on this as i cant just understand. I have a point to point link with the details below, but i cant get traffic of more that 15Mbps total. 99.99% of the traffic is UDP. I badly need it to get to at least 75Mbps of UDP traffic. The radio link is very good and i get under 1ms ping th...

thanks normis, WDS plus bridging the LAN interface gave me a beautiful bridge and the thoroughput is good.

amsco

hi Normus, can i add the lan interface to the bridge to create just one network?

thanks amsco

Hi Stepen, Signal level is good -58, 5.2Ghz frequency, i have tried both nstreme enabled and disabled but still the same, and it is an EoIP tunnel giving a complete bridge. Hope this helps?

i have two radios on mikrotik routerbord 200, with minipici but ic ant seem to get it to do more than 6Mbps half duplex. Can someone please help, i need to do at least 10Mbps or better still 20Mbps. Antenna is 30Dbi and distance is 2Km.

Thanks

amsco

Stephan thanks, i think i would go the way of outdoor radio, what make is the motherboord with minipci slot?

Ndukwe

Thanks Stephen, if i decide to use an indoor unit with the 1GHz board with LMR 400 120ft from ur experience would i still be able to achieve the maximum bandwidth for a 1KM link with the 30Dbi antennas i have.

Regards

Ndukwe

Can some some give me a spect on 802.11a to achieve 100MB on a 1KM link. can i achieve this with a routerbord 220 or must i use another board.

Daniel can you give more details on your 83KM link, hardware, software, config etc.

thanks