Do you want the wole WAN side to be able to access this or just 1 computer/ip

Sent from my SM-G900F using Tapatalk

I have a Main router. Then i have a sector connected directly to that router. I am running OSPF on both routers. My clients connected to that AP has a problem where the pppoe is not connecting to my external radius i have to manually add them on the AP for them to connect what can be the problem to ...

Why do you want to limit local and a client. Are the clients co nected via CPE will need to know what your setup is. CPE Directly connected or do you want to control wifi

Sent from my SM-G900F using Tapatalk

Hi can you share the IP address range that your gona use and another thing you need to setup the ip address for each router. Lets say you have an IP 10.10.99.0/24 that you wil use for the routers. Now on the CCR you connect your laptop or pc with ether cable and open winbox. Click on mac-address log...

To answer your question. You will be able to get internet "ping to google dns " from behind your pppoe-client because your nat rule hides your your local IP's behind your Public IP(PPoE IP) your traffic is natted to your public ip which gets internet. When you ping using lan or wlan interf...

add address=192.168.20.2/24 interface=ether2 network=192.168.20.0 This is wrong in two different ways. You shouldn't have an IP assigned to an interface that is part of a bridge, just assign it to the Bridge "LAN" like you do before it. Also, don't have two IP's for the same subnet on dif...

In theory setting both the radios to 20dbm, they should still output the same wattage ? Wrong. Read the manual : tx-power ( integer [-30..30] ; Default: ) | For 802.11ac wireless interface it's total power but for 802.11a/b/g/n it's power per chain. So the is a power difference between the 2 at sam...

Good day, I have a question on tx power with the new AC radios. For example. Setting a basebox 5 to 20dbm manual tx power I will get a signal strength of - 55. Replacing the basebox with a Netmetal 5 and manually setting the tx power to 20 gives me tx signal of - 69 ? Same happens if you put the ra...

Access ccr using mac and winbox . Check if netmetal is in ip- neighbours terminal then mac-telnet into that router setup ospf in both routers then you will be able to access both from winbox with router static ip

Sent from my SM-G900F using Tapatalk

Try to setup ospf on both routers this usaully works for me

Sent from my SM-G900F using Tapatalk