Hi, I buy a CCR2116 and install a M2 disk on it.
I format the drive via Winbox and now I would like to install dude in M2 path but how can I check if disk is working properly?
I dont see anything for use it

thank you and good work to all

I have the same problem too with CCR 1036 series.
Try to upgrade but not solved.
Someone have fix the problem?
have a nice day

hi all, there is a way for create a script that check how many times pppoeclient links down? I would like to monitor this and for example if there are more than 50 times links down in one day, I will receive an email. I try to add this but I dont find links-down command when I add this script. Someo...

Using TR069 to run a .alter is the same as running /import file=whatever.alter Test the .alter first with /import before using TR069 to push it Hi it works so file is good. From the ACS and the protocol perspective the file ( script) was successfully downloaded by the device. That is why the proced...

hi all, I am testing avsystem server for centralized my network. i would like to add in all of my routers some firewall commands, for example /ip firewall filter add action=accept chain=input comment="Accept Established e Related in Input" connection-state=established,related /ip firewall ...

There is nobody that uses centralized pppoe?, Nobody neither mikrotik have an idea how to help growing clients i think

i would like to have a centralized pppoe server for about 5k users.

Hi, Minimum mtu 1522 https://mum.mikrotik.com/presentations/US13/kirnak.pdf hi i think is really good a configuration of Tunnel terminator like this but i have a question.. using a pppoe server that is not in the middle of the others u don't have the sum of tx and tx traffic in eth connection? (ex....

It does nothing by default. /system script add name=test-script source={:log info message=("1234567890");} /system routerboard mode-button set on-event=test-script /system routerboard mode-button set enabled=yes hi i try but doesn't work. I try too with other script but still no work. i u...

doesn't work too. how can i find command for doinf other tests? i would like to use it for power on/off wlan card. Thanks And even more annoying, I tried adding your example code to test. The log told me the config. had been modified, but pressing the button doesn't generate the expected log line. I...

nobody use centralized pppoe server?
no suggestion?

Hi is possibile to configure hap button for disable wireless instead of using it for wds?
thank you

Hi I have a centralized pppoe server (ccr1072) with about 4000 users with max traffic about 2.5GB download and 200M upload i see that cpu of this router is about 40% and i have 2% loss packets from router to clients and from router to internet. is possible that this router can't keep these users? ma...

Hi,
i would like to changemy bgp router ccr1072 with a xeon server because when i have ddos attack cpu go to 100% and I loss packets.
there is a pci that mikrotik support for have at least 4x 10G ports?
thank you

Twitch doesn't leak IP addresses. Playing on unknown servers, voice chat, P2P games, Skype, etc are the more likely causes.

problem is twitch.
if stream in google server or youtube they can't hack him.
is use twitch they can hack

Without more details we'll be of little help. If the attack is a DDoS their are mechanisms you can implement on your network to help mitigate the damage they can do. That said it also depends on your network architecture too. Things like: Enforcing BCP38 policies on your devices (CPE or PPPoE serve...

Hi i have some problem with hacker attack to my customer that stream with twitch.
There is a bug in their servers that they can see public ip and hack it.
My network go down when it happens and i can’t see nothing.
what can I do for stop this?
Sugget?

I'm assuming you have an AS number as well and are doing BGP with at least 1 other person upstream correct? If so, you'll need to peer with the customers router (define the peer) and then you can choose what routes you send to his router. Some customers may want all routes, others may want only a d...

Hi,
I try to configure internal bgp from my main bgp router to other.
connection is estabilished but I can't see the full table in the second router.
what's wrong?
thank you

Hi
We are a wisp and one of my customer want to announce his ipv4 classes and have his AS number.
he had all with ripe and now have As number and /22 ipv4.
I must set his bgp router.
How can i do the config?
must have route full table?
thanks

Hi,
someone use or try to use blissradius+whmcs?
i would like to change dmasoftlab radius because it hasn't dhcp server and integrate amministrative program with radius.
i found this but I don't know if is good.
someone use them?
thank you

thak you for reply.
I see that if I put 4k+ clients in one CCR1072 I have some packet loss (about 1%). traffic is about 1.5gb download and 150mb upload.
i would like to centrliazed but if there is a problem i can change..

hi, i would like to know if with 5000 pppoe clients and about 2GB internet traffic max, you prefer have a pppoe server centralized or various pppoe servers.
thank you

Hi all
I have the same problem.
what mtu must I use?
thank you