thanks the problem is solved , but I must change the issue from pppoe to static while I enter to the othe device

I think your that your comment matches with this discussion with little change .Are you agree with me ? http://www.urosvovk.com/step-by-step-how-to-configure-a-pptp-vpn-client-on-mikrotik-routeros/ I'll try and see the result and I'll replay[/i] Thats a link to making a PPTP client? Nothing like th...

thanks , I use only ppp port in the RB and other devices that connected to the router via wireless ,so I want to enter from device connected to the router not via cable You could use something similar to this; /ip firewall nat add action=masquerade chain=srcnat comment=speedtest-nat dst-address=!19...

Of course you can. Make port 4 a slave to port 5 and you can cable in to port 4 to access the interface of the beam. There are multiple ways of doing this if you give more information. thanks , I use only ppp port in the RB and other devices that connected to the router via wireless ,so I want to e...

I don't think this is a MikroTik question really. I have no idea how you can configure this other device. Have you tried their manufacturer forums?

Thanks for replay I want to enter to that device from RB as I do it in other router type such as tp link

update the device to the last current firmware or try to change adapter

try to use same subnet mask for all devices and activate (tick) vpn

Can Anyone help me

thanks for valuable information

Hello every body,I have a power beam M400 5G and I use it to receive a signal from near provider.Also,I use a mikrotik rb951u as a router in pppoe mode (user name ,password) , the Rb connected to power beam (LAN of adapter of power beam to ppoe of RB).I want to enter to the power beam gui through th...