If the tunnel is an interface you could mark the routes for source address 192.168.10.55 and select the AUS gateway as default gateway for that mark. If the tunnel is policy based you could just include that source address in the policy and set the default gateway correctly on the PC.

Thanks, I tried, but did not get a good result as my router lists the ip-adress and the virtual interface vlan10

Assuming you use bridge vlan filtering;

/interface bridge host print

Surely you've set up ether1's address on the bridge, not the slave interface?

There is a 48 port switch. It just takes up 2 U. You have to order it as three pieces and do some self assembly. There are only two part numbers. 2 - https://mikrotik.com/product/crs328_24p_4s_rm 1 - https://mikrotik.com/product/SplusDA0001 Or are you really just asking for a 1u - 48 port switch? Y...

48 port switch with swos or routeros would be great (and poe+ if possible:))

You mean this? *) wireless - fixed RTS/CTS option for the ARM based wireless devices; Hope you are right - i questioned support about the worrying performance on this thread. they suggest to try the latest rc. will you guys give it a go? This update fixed latency spikes and slow throughput for me. ...

I'd also love a 48-port switch (SwOS and/or ROS) with 802.3at/af or 24v or both as options.

Ok, the problem was in VLAN connection. Had to find out VLAN ID from ISP and add VLAN interface connected to SFP port and make PPPoE bound to VLAN interface. Now it works like a charm.

Thanks,
Regards,
Petr Sourek

Can you tell us what kind of speeds you're getting on it?

Please provide a paste of /ip firewall nat print detail from the terminal. --- EDIT: here's a working SIP forward rule for you; /ip firewall nat add action=dst-nat chain=dstnat comment="SIP 5060" dst-address=1.1.1.1 dst-port=5060 in-interface=ether1 \ protocol=udp to-addresses=192.168.1.25...

Will we see DSL modems soon? [admin@sw2] /interface dsl> set Change properties of one or several items. <numbers> -- List of item numbers arp -- Address Resolution Protocol arp-timeout -- comment -- Short description of the item disabled -- Defines whether item is ignored or used l2mtu -- mac-addre...

Hello! As far as i understand it refers to: My WAN iP: Draytek Tunnel IP Remote Gateway IP: MT Tunnel IP Remote Netowrk IP: MT Network Remote Network Mask: MT Network Mask Local IP: Draytek Network Local Network Mask: Draytek Network Mask My WAN ip: WAN address of the Draytek router Remote Gateway ...

Got the Procend 180-T ..[cut].. I will post some results.. Interesting, I'll wait for news. Have anyone links of EU/shops where these modules are available? thanks.. Yeah, that would be very interesting. I am already in contact with Allnet but they mean that they can't ship before Q1/2018. So i hop...

Versatek have them in stock. https://www.versatek.com/product/vx-160kit-vdsl2-sfp-modems-co-rt/ I hear Allnet (allnet.de) are investigating them too and might have something in Q4 2017. I am actually employed by Versa Technology and we have received quite a bit of inquiries and sales for the VDSL2 ...

Milotop, can you share a screenshot of the SFP interface? We received one report of a "Rx Lose" status. Wondering if you experienced that as well.

I posted screenshots on page 2:

viewtopic.php?f=3&t=104109&start=50#p600823

Versatek have them in stock. https://www.versatek.com/product/vx-160kit-vdsl2-sfp-modems-co-rt/ I hear Allnet (allnet.de) are investigating them too and might have something in Q4 2017. I am actually employed by Versa Technology and we have received quite a bit of inquiries and sales for the VDSL2 ...

n4p: I got mine at proscend.com. They work just fine with Mikrotik, see page 2 of this topic for screenshots etc.

Can you get a hold of the dslam specs? I posted the supported adsl modes on page 2.

UPDATE: 180-T supports Vectoring, 180-R does not.

Great!! I presume you further created a VLAN interface on top of the SFP, and a PPPoE interface attached to that VLAN? (or maybe DHCP client when that provider does not use PPPoE) Is there any way to access the connection info from the router or from a machine behind the router? (to see the line mo...

UPDATE:

I have reached 40mbit/s download and 9mbit/s upload speed on the 180-R and 180-T connectors, which is the maximum rate this customer should be getting. Unfortunately I can't test higher speeds at this moment.

Hi all, I can now confirm that the 180-R and 180-T modules work with Mikrotik to connect to VDSL. See the screenshots for interface settings and traffic indication. The only change i needed to make was to turn off Auto Negotiation on the SFP interface. The module does 1Gbit/s Full Duplex. TeamViewer...

Yes yes apologies for taking so long... I have to make an appointment with a customer who has VDSL because I don't have a new one to install, and our office runs on fiber exclusively...

I will update this when I can!

Yes those are only for ATM DSL. Proscend says that the ATM settings cannot be changed. If your configuration is not listed, you can't use it. Only VDSL will work.

Hi everyone,

these are the xDSL ATM settings of the modems mentioned above:

I intend to resell them as a replacement for traditional ADSL(2+) and VDSL modems like Draytek. It'd be cheaper and more efficient to run the SFP connectors.

I have received a sample order from Proscend (180-C, 180-R and 180-T). My goal is to get these working with traditional DSLAMs from KPN in the Netherlands. So far the only thing i can confirm is that the 180-R module is recognized by an RB2011UiAS-2HnD-IN. Will update this topic after more testing. ...