I have one running now, with the onboard lan running too

public Ether ip = 192.168.0.2
the internal ip of the mt is 192.168.10.2 (private)
my ip on the internal network is 192.168.10.10.

what dst-nat rule can i apply that will allow me the via public to connect to the server on the inside?

Do you think a reboot of the box will help, or maybe a system reset??

The evening I installed 2.9rc6 It work alright but was abit unstable.

chain=srcnat out-interface=toserver src-address=192.168.4.0/24 action=masquerade

This worked on 2.8 it worked lastnight and now it dont wanna work no more???

It looks like 2.9rc6 seems to have a problem when activating the firewall, I tried to masquerade traffic between 2 ip's and it just didnt want to work. I have been haveing this wierd issue for the last day or so. Has anyone else had the same problem?? 2.9 is a rather impressive os so I am looking fo...

Does anyone have the problem there the routers forgets its ppp setiings, profiles have parts missing and so fourth??

when one is going to use dst-nat or scr-nat

does one use the ip address off the pppoe local address or does one use the remote address that is given to pppoe??

sorry my mistake, it is src-address to-src-address. Only sometimes it get data through

when I try to use scr-nat NAT rule, only periodicaly does it allow traffic through. src-nat Masquerade works, but I need to have differnt IP's comming out othe the 2nd interface. This is how my scr-nat NAT rule was setup scr-address=192.168.1.3/32 action=nat to-dst-address=196.245.10.3 now only at r...

Lets say I have a highsite with 3 2.4ghz sector antenna's, each antenna is approx 1 to 2m appart from each other, their frequencies also dont over lap. Now will 802.11g per antenna, with letsay -30db signal, how many connections can the highsite support with each client using approx 1mbit to 2mbit b...

Is there any indication that Mikrotik will support wimax?

I had the same problem 2, routeros 2.8 is unabble to mark individual p2p connections, they all run in a single pipe. I hope that 2.9 will fix this problem

Yes, and it is also relatively simple to do as well

I am trying to write a script to test a project we are working on. Lets say i have a :for e from 1 to 10 do ={ : log message="hello"&e } basically what I want to happen is in the logs it must look like this hello1 hello2 hello3 ect. This i want to adapt to connection marking in the fir...

I have written to support many a times, and when i recieve an answer, its not very conclusive. I am also not the only one here that has the same problem. There have been quite a few posting about this, and the funny thing is that this never used to happen before. It started i think iv os version 2.8...

Will routeros 2.9 have the same problems that 2.8 has with randomly disconnecting clients that are connected to it via pppoe?

Ok, how many people here are running pppoe on their highsites and also keep getting random disconnections between the client and the highsite? I have 2 clients, who both have good signals. Now regardless of the highsite load, weather conditions, they still lose their connections. I know that its som...

I am running a high site with some clients on it. The high site is using 3 sector based antenna all running pppoe server on them. The cards being used on the sectors are prism2 802.11b cards @ 2.4ghz. The back haul link is running an Atheros Ar5215 @ 5.8ghz. We set up a queue's to basically allow ou...

How can i set up either through load ballancing or something, to run 4 adsl lines as one, they are all from the same isp and have different ip's but the same gateway.

This is cheaper to do for us than getting a 2mbit dsl line.

Well the Mtu are set Now(sort of forgot about that one) the wlan card on the high site is fine cause they are the only client on that interface with the problem. The router at the client side has been replaced aswell and still no change. Mtu on interface is 1500 the ppoe server is set to 1480 and th...

This is a wierd problem, if he browses then its fine, but as soon as they download then the problems begin, but there is no pattern, it could be 500k file or a 23meg file. It happens after a few sec's but mostly after like 4 to 5 min. If you make a new request then data starts to flow again. I am ru...

I have a client that is sitting on our wireless network, when ever they download anything from anywhere they just lose the data stream, as soon as they click resume then the data continues. They are the only one on the network that is having this problem. All the other clients in the area are fine. ...

ok so how do I mark incomming traffic from specific ports?

Ok the mangle rules are showing traffic but the queues are only only showing me upload traffic only and no incomming traffic.

Nope, thats what wierd i see traffic in the first set of rules but then nothing in the secound set of rules.

I have been struggling for the last week to get these queses to work. I got a simulated network running in the office, to see if the new queue system works before intergrating it into the main wireless network. I got pppoe user sitting on interface ecclan and the connection to the internet is on the...

They have some sort of plastic material covering the slots.

What is the noise-floor-threshold

I have wireless connection to a building. On top of the building i am running a mikrotik system. The antennas are 16dbi slotted wace guide, horizontaly polarized. I have a wireless router with a 12dbi horisontaly polarizes yagi. Now why does my signal drop from 90% coms tio 40-50% coms. There is no ...

um, i have no scr-nat rules setup, also it will be difficult to add the ip's of the secure websites, due to the fact the mikrotik is sitting behind a server. The server is running suse 9.1 and we tested the interface thorugh which the high site come in to and it doesnt block the sites. Will try that...

We are running a wis, with clients connecting to the high site via pppoe, the problem is that they cannot connect to any secure website ie like online banking sites. Everything else is working like a dream. Our firewall on the highsite mangle everything through the firewall, so its not that, we have...