Hello, I have the `hotspot user` and I want to limit access from this user to some hosts only. This user has assigned IP-address with hotspot (e.g. 192.168.0.2 ). I've added the following firewall rules: [admin@gw] ip firewall filter> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forwa...

Hello, I have the following network schema: --| ADSL modem |------| HUB |------| mikrotik |----- hotspot 192.168.0.1 | 192.168.0.2 192.168.1.1 //192.168.1.0/24 clients network// | | | 192.168.0.3 |Proxy+Radius| //192.168.0.1/24 internal network// For each client, authorized through Hotspot service o...

I have an adsl-modem attached to MT box with simple bridged scheme like that: (WAN) --- <ADSL> --- <MT> --- (LAN 192.168.1.0/24 hotspot) It worked fine, but now I need to set up an additional computer in network as follow: (WAN) --- <ADSL> --- <HUB> --- <MT> --- (LAN 192.168.1.0/24 hotspot) 92.168.0...

Hi, It's possible to authorize Hotspot clients some way using HTTP and HTTPS? E.g. clients can authorize over HTTP and over HTTPS as they wish. Now I'm using HTTP-authorization for clients. But when I'm turning on HTTPS in Hotspot server profile (HTTP still checked too), client authorization HTTP-re...

Hello,
I don't want to account traffic from some Internet host when using hotspot gateway (when user logged in). How to configure MT Hotspot to do it?

Hi, I tried to use simple queues and dynamic both: [admin@gw1] > queue simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="local-traffic-queue" target-addresses=192.168.1.0/24 dst-address=10.10.1.2/32 interface=ether2 parent=none direction=both priority=8 queue=default-small...

Any ideas? I have got confused using static and dynamic queues ... Help me please. I would like to get the answers. I also have problems mixing dynamic and static queues. You are not alone in your interest.. There is many people on the forum who wanna know something about. I asked several times the...

Hi, I tried to use simple queues and dynamic both: [admin@gw1] > queue simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="local-traffic-queue" target-addresses=192.168.1.0/24 dst-address=10.10.1.2/32 interface=ether2 parent=none direction=both priority=8 queue=default-small...

Hey is anydoby here can help me?

Hello all, I'm using hotspot in MT, how to set local resources for hotspot server (traffic for these resources and from these resources is not considered as Internet traffic when client logged in)? Basically, any traffic from / for these resources should not to decrease an user traffic limit in hots...

Any ideas? I have got confused using static and dynamic queues ... Help me please.

You can use static queues to acomplish the requested scenario. Doch ... is it possible to use hotspot made queues (dynamic) and my own static queues simultaneously? Hotspot automatic queues so convenient .. - first, create two mangle groups. One to mangle traffic between users and required server, ...

I'm using hotspot with bandwith limit ('rate limit' in hotspot user profile). It creates dynamic queue when user logins but any of exist static queues don't working! I want to use static and dynamic queues simultaneonly. For all hotspot users I need to set 10Mbps speed for access to some servers but...

I think you can specify 'IP address' or 'MAC-address' for the specific 'ip hotspot user', that only specific IP/MAC-address will be used for the specific HotSpot user. Some of hotspot accounts are 'shared' therefore I can't bind it to single IP/MAC. Hotspot user address can be 'single IP' only, not...

You can specify 'range' on '/ ip hotspot ip-binding', / ip hotspot ip-binding add address= IP address of client Address ::= A.B.C.D[-A.B.C.D |/00..32 |/A.B.C.D ] (IP address range) E.g. '/ ip hotspot ip-binding add address=192.168.100.1-192.168.100.10'. But there is another one trouble: this way al...

One of the option is to use 'ip binding', where you can specify 'type=blocked' for the specific IP address('address') or MAC-address('MAC-address'). You can specify 'address', 'mac-address' for the HotSpot user, then login will be possible only from specified IP/MAC address. If I use the IP-binding...

One of the option is to use 'ip binding', where you can specify 'type=blocked' for the specific IP address('address') or MAC-address('MAC-address'). You can specify 'address', 'mac-address' for the HotSpot user, then login will be possible only from specified IP/MAC address. If I use the IP-binding...

Hey people,

1) How to disable some hotspot logins from some IP-address?
(i.e. I want to disable 'user1' hotspot login from X.X.X.X IP but 'user2' login must be enabled from this IP!)

2) How to disable some hotspot login from some MAC? (as above).

Thanks.