Contact the Big Mik's support because this sounds like a hardware problem. On the one hand, I was afraid this was going to be a PITA hardware issue. On the other hand, I'm glad it's not something systemic :). Thanks for this feedback, I do have a case open with MT. I wanted to post here too though ...

What's happening is this: -Router is fine -All SFP modules go offline (lights go dark) -The watchdog starts to not be able to ping beyond this router -The watchdog soft reboots the router -The SFP modules do not come back online -We dispatch someone who physically unplugs the router and plugs it bac...

Thanks for your reply. The router can ping that address if the SFP ports are online. Are you suggesting that I increase the delay between reboots?

/export hide-sensitive (10233 messages not shown) jun/30/2021 15:23:48 system,error,critical System rebooted because of ping watchdog timeout jun/30/2021 15:29:39 system,error,critical System rebooted because of ping watchdog timeout jun/30/2021 15:43:10 system,error,critical System rebooted because...

I'm having an issue with a CCR2004 where all of the SFP's go completely offline. The router itself seems to still be online, but all SFP's crash. I have not been able to get a console cable or ethernet into the eth0 port connected as it's in production. I'm going to replace the CCR2004 itself tomorr...

Did anything ever happen with this? Unfortunately the USB modems were always flaky. Never narrowed down precisely why. Verizon hands-down has the best coverage here... Good news, though. You can take an activated Verizon SIM card and pop it in one of these SXT LTE kit-US: https://www.amazon.com/gp/...

You have two different revision routers, the second one is the newest revision 2 device. Thank you, I really appreciate your response! In terms of feedback for your team: the ability to monitor DC voltage remotely is a *HUGE* selling point for me. I'm disappointed to see that it's been removed from...

I have two CCR1016-12S-1S+ One is running 6.45.1 and one is running 6.45.2. The CCR running 6.45.1 displays voltage on /system health print fan-mode: auto use-fan: main active-fan: main cpu-overtemp-check: yes cpu-overtemp-threshold: 100C cpu-overtemp-startup-delay: 1m voltage: 23.8V current: 1068mA...

Have you still on RC6 ?

It looks like we're operating 6.41rc28. The modem stays online well from what we can tell current uptime on the LTE interface is 3 days.

With the hAP AC & Hex3, it's a full-size USB port but the interface goes link down every 60 seconds. It doesn't lose power as the lights are green. I see. I am assuming you set DHCP Client on the Interface right? When I connect it to my PC it never goes down. This is probably a stupid question,...

Does the 730 interface reboot frequently for you? We've never had a reboot that I can find in logs or am aware of, with 6 in production at this time. However, half of the included micro-USB to USB adapters we've received with the CCR's were dead on arrival. I'd recommend trying a different USB cabl...

On the router that is worst affected (a CCR1036) it takes around 10 minutes from typing an /ip route add... command to the route being inserted into the forwarding table. Likewise querying the routing table takes an age - 15 minutes to run a '/ip route print where static=yes' is pretty common. To g...

I am pleased to say that we are in receipt of a test build (6.41rc6) which is able to bring up the 730L LTE modem. Here is the USB device info: https://image.ibb.co/kq8Y9k/image.png And here is the working LTE interface: https://preview.ibb.co/fs5kN5/image.png Thank you very much to Mikrotik support!

This is a dump of a working USB620L: https://image.ibb.co/cE2Qpk/image.png And this is a non-working USB730L: https://image.ibb.co/gMQT9k/image.png I am assuming that the device ID just needs to be "enabled" in order to make the LTE modem show up as a device. Is this correct? We have tried...

As the subject indicates, we are looking for an update on compatibility of the "LTE" interface for a Verizon USB730L USB MODEM. This is the next generation of the U720L and we are thinking it probably just needs to be "activated" in the MikroTik firmware. We have sent a supout.ri...