Hi mikrotik experts

would like to know what will be the resolve for this
I am receiving this but if you look at IP Services this config is disabled Can someone explain how to stop this.
Thanks

great you really are lost

The fact that you can ping both PCs from inside the router but not from PC to PC is your first clue. Something in your config is doing this. Start with ping, don't worry that file sharing isn't working. If you can ping both PCs from inside the router, then they should be able to ping each other (th...

My guess is that it's not a bridge that you need to pass traffic between the two LANs but a router. If your Mikrotik device is default gateway for both networks, then it should work without any additional setup (actually you have to make an effort to prevent it from doing it if that's not wanted). ...

Hi Chris thank you for replying /ip dhcp-server network add address=192.168.60.0/24 gateway=192.168.60.1 add address=192.168.90.0/24 comment="hotspot network" gateway=192.168.90.1 add address=192.168.100.0/24 gateway=192.168.100.1 /ip dns set allow-remote-requests=yes servers=8.8.8.8 /ip f...

Hello Sir, I want the network to see each other 192.168.100.0/24 and 192.168.60.0/24 /interface bridge add fast-forward=no name=LAN add name=LAN2 0 interface=ether2-LAN bridge=LAN priority=0x80 path-cost=10 edge=auto point-to-point=auto external-fdb=auto horizon=none auto-isolate=no 1 interface=ethe...

We have 6Mpbs used by almost 200 users

Max Limit UL/DL : 100k/300k

do anyone have suggestion what to do. this is slow in connection. thanks

Can we set thresholds in Mikrotik so if there is persistent RTO (but not totally failed), Mikrotik can trigger an auto-fail-over?

Can you set notifications for Mikrotik for failed ISP1 or ISP2? So we get SMS the moment they fail? (Can you give some sample script)

I check the specs of RB750r2 and it doesn't have wireless. so that means it doesn't support wAP AC?

Hello, can anyone help me im using RB750r2 and configuring it to use my wAP. So i can test my hotspot login page and also to know the configuration from the start the problem is I cannot see the wAP ac in winbox only the router RB750r2. also i cant configure my router is it because i dont use my ISP...

Hi Chris thanks for your reply. Im new in networking and would like to learn a lot in this field. Im excitingly challenged on this configuration i would like to happen there are 2 isp in each buildings. 1 building is using 2 isp same as the other building what would i like to happen is to connect my...

Hello Good Day! I would like to seek help on this. How can I transfer to other ISP by means of radio? Here are my network given: both router are in bldg1 and 2 are using RB2011UiAs-RM Bldg1 ISP1, ISP2 ranging 192.168.100.160-192.168.100.200 (the others are ISP1), Radio (10.0.0.1) Bldg2 ISP3, ISP4 ra...

Hi, can you help me on this.. SNMP settings enabled: yes contact: location: engine-id: trap-target: trap-community: public trap-version: 1 trap-generators: SNMP Community Name: public Address 0.0.0.0/0 Security: none Read Access: Yes Write Access: No Auth Protocol: MD5 Encryption Protocol: DES SNMP ...