MikroTik

zack

Does somebody know something about Equal Cost Multipath routing in the new 2.9 versions. Does it work or like before they are disconnects and other problems with it.

zack

I want ot use 150 simple queues with different priorities. Does this work. I there anybody with similar configuration.

zack

Anybody ???

zack

Does somebody have normally working configuration with two links to Internet

zack

I have 1 x FastEthernet with 2 IP addresses 192.168.1.2 and 192.168.2.2 I want to do NAT on this interface and to load balance between 2 default gateways 192.168.1.1 and 192.168.2.1 connected on the same LAN segment When send traffic to 192.168.1.1 NAT with address 192.168.1.2 and when send traffic ...

zack

If I have one LAN interface and 2 gateways. Can I have 2 IP addresses on the LAN interface and to do nat (masquerade) and load balancing. If I have the following config will it work: [admin@X] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 19...

zack

Does Mikrotik 2.8.28 supports Senao NMP-8602 Plus wireless card with 5006 (5413) Atheros chipset

zack

Every 3-4 hours I must change frequecies to resolve the problem

I'm definitely going to downgrade the box to 2.8.2x

zack

00:02:6F:12:1F:17 2.4ghz-b 2499 yes no -50 yes yes yes 00026... 2.8.21 00:02:6F:12:1F:17 2.4ghz-b 2494 yes no -56 yes yes yes 00026... 2.8.21 The radio is working on 2499Mhz but what is this on 2494Mhz Any suggestions

zack

Many hours observation and here is some conclusion. Disconnect is happening only when Mirkotik changes data rates.
for example: from 5.5Mbps to 11Mbps
I'm sure in that (more than 15 hours

)
RouterOS 2.9.6, Atheros 5213, frequency 2.4Ghz

zack

From all the posts i've read I think there is only one solution for this problem when using 2.4Ghz - downgrade to 2.8.x

zack

From all the posts i've read I think there is only one solution for this problem when using 2.4Ghz - downgrade to 2.8.x

zack

I've tried everything. With link 2.9.6(5213) <~~~~~~> (5213)2.8.21 i have "extensive data loss" on random periods. The signal is good (-70dBm) and there are no radios working on the frequencies I am using. Before the update from 2.8.22 to 2.9.6 (one year) everything worked fine. Please hel...

zack

The problem started when I start to use 2.9.6

zack

Hello, I have very strange question. How is this possible. My radio is working on 2499Mhz but for a year and from 2 days I have problems. This is the output when I scan. Can somebody explain me what is this on 2494Mhz and can it be the reason for the problem ("extensive data loss" and &quo...

zack

What about [admin@MikroTik] > :beep length=5s frequency=10000 the power relay interupts for 5 seconds and the modem is restarted. I will read more about scripting in Mikrotik (I don't know nothing about it now) and will test it. Then you will have the results :) It works like GSM bombs - I think it ...

zack

You are not helping me
This is telco modem and I can't touch it (change, configure and so on)
I have concrete question.
Maybe if I ask you how to do better QoS you will tell me to buy 155 Mbps Internet connection.

zack

I have one modem which I want to restart when it fails from Mikrotik PC connected to the modem. The only way is to stop the power supply for a second with some kind of power relay. The problem is that I don't know how to output for example 3.3V sgnal from the Mikrotik PC when ping to the modem fails...

zack

Sometimes when I add rule like this: ip firewall nat add chain=dstnat protocol=tcp dst-port=23 action=dst-nat to-addresses=10.10.10.203 to-ports=23 everything stops working. All traffic is forwarded to 10.10.10.203 in this example. When I make trace i se traffic going to my gate where I make NAT and...

zack

When I make port forwarding let say on port 27015 all traffic is forwarded to this IP not just that to port 27015. Can you tell me why

zack

Sorry but when I put dst-address=public_ip which is IP address of Mikrotik outside interface and it isn't working. Maybe it's a bug or.....

zack

The question is why it works without DST-ADDRESS=PUBLIC_IP

zack

Everything is working. Why to log anything. And the address is the public IP of the router

zack

WITHOUT dst-address=PUBLIC_IP_OF_THE_ROUTER everything works just fine WHYYYYY [admin@X] ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat out-interface=ADSL src-address=10.0.0.0/8 action=masquerade 1 chain=srcnat out-interface=ADSL src-address=172.16.0.0/16 action=...

zack

I do not have any Firewall rules configured. Only this that come with Mikrotik by default if they are any. Do I need to open port 3389

zack

It isn't working. PUBLIC_IP is the IP address of outside interface [admin@X] ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat out-interface=ADSL src-address=10.0.0.0/8 action=masquerade 1 chain=srcnat out-interface=ADSL src-address=172.16.0.0/16 action=masquerade 2...

zack

I need to do port forwarding on Mikrotik 2.9 I need to forward ports 80 and 3389 to the inside network. I have one public IP address and the following NAT rules on this router ---------------------------------------------- [admin@X] > ip firewall nat print Flags: X - disabled, I - invalid, D - dynam...

zack

Can somebody tell which is the best way to do the following things: Example - I have 40 users - 37 of them must have 32Kbps download and 128Kbps upload each - 2 of them must have higher priority and have 64Kbps upload and 128Kbps download each - 1 of them must have lower priority and have 64Kbps upl...

zack

10x a lot. Everything is working

zack

Is there any problem if I have only one real IP address and use it for PAT

zack

[admin@BR7] ip firewall> print detail 0 name="input" policy=accept 1 name="forward" policy=accept 2 name="output" policy=accept [admin@BR7] ip firewall> What I need to add. Or everything is fine. Where I can fing good info about Mikrotik firewalls

zack

I have one public IP address and want to redirect port 3389 to internal IP address 10.10.10.3 The following config does not work: >ip firewall dst-nat add action=nat protocol=tcp dst-address=xx.xx.xx.xx/32:3389 to-dst-address=10.10.10.3 disabled=no May be I must do something with the firewall becaus...

zack

10x Normis
That helps a lot

zack

Can somebody give me answer

zack

I have transparent web-proxy with 400MB cache. I have 512/128Kbps DSL line. Hits take 5% from real web traffic. Is it good idea to set up normal proxy, let say with 40GB cache. Will I spend much more bandwith and can somebody give me output from real-world working web-proxy (ip web-proxy monitor) 10...

zack

If I use:
system watchdog set reboot-on-failure=yes watchdog-timer=yes
on mainboard that is not Mikrotik routerboard (some Intel mainboard),
when the system crashes will the Mikrotik reboot itself. Where I can find more info about system watchdog commands

zack

Does anybody have any progress about the problem.

zack

Is there any way the router to restart itself when it crashes

zack

Strange.
I have the same problem. And the problem started 6-7 days ago. Before everythind was just fine. Then my Wireless routers 2.8.21, 2.8.22 started to restart themselfs and somethimes to crash. Can somebody help us.
My config is only with wireless cards and no Ehternet.

zack

Which driver supports 2300Mhz-2500Mhz and 4900Mhz-5850Mhz frequencies

Search found 40 matches

ECMP

Simple Queues

Load Balancing to Internet

1 ISP, 2 DSL Links and Load Balancing

Not again

NAT

NMP-8602

Please - how is this possible

Another conclusion

I forgot

Station to Bridge - Strange Bahvior

Ufff

Sorry for the other post

Reboot from Mikrotik

Problem description

:(

Port Forwarding

Queue question

DST-NAT

WEB-Proxy cache q

SYSTEM WATCHDOG

Atheros 5213 frequencies