Try this where IP x.x.x.x is your public IP and ether1 is the public interface add chain=dstnat in-interface=ether1 dst-address=x.x.x.x protocol=tcp \ dst-port=80 action=dst-nat to-addresses=192.168.0.4 to-ports=80 \ comment="Redireccion http" disabled=no i did try it man not working also...

-----
yup...
i hope this okay..

Code: Select all

add action=dst-nat chain=dstnat dst-address=10.0.0.216/32 port=80 protocol=tcp to-addresses=192.168.0.4 to-ports=0-65535

assumsy your public ip is 10.0.0.216

regards
Hasbullah.com
----

Still not working man same error

Dear colleque i have this NAT Rule: [admin@MikroTik] ip firewall nat> add action=dst-nat chain=dstnat \ dst-address=10.0.0.216/32 to-addresses=192.168.0.4 put when i open explorer and try this Public IP i get this error While trying to retrieve the URL: http://xx.xx.xx.xx/ The following error was en...

Dear colleque i have this NAT Rule: [admin@MikroTik] ip firewall nat> add action=dst-nat chain=dstnat \ dst-address=10.0.0.216/32 to-addresses=192.168.0.4 put when i open explorer and try this Public IP i get this error While trying to retrieve the URL: http://xx.xx.xx.xx/ The following error was en...

thanks for your help all

i just cannot get it, where is the problem? you are scanning from MT your wireless and you see your Dlinks SSID and MAC address, but ssid should be hidden? is your MT set to same ssid? sir , i have this scenario , MT1 (wirreless interface with hidden SSID) Dlink (as Access Point Client when i scan ...

Right!.
If you configured in past that SSID, your PC will be always seeing that SSID.

I had that problem solved.

Regards.

NO . im using MT to scan in dlink 2100ap i see the mac of the wireless card but hidden ssid , in MT i see the SSID normaly

Code: Select all

/in wi set <interface name here> hide-ssid=yes 

i still can see it in the scan

please i need to know how can i make a hidden SSID i just check the hidden ssid box on the wireless interface but when i do scan i SEE ' it



any help

I do not understand what you are talking about. I assume, you have two interface on "- AP with static ip same as hotspot range -", one interface connection to hotspotgateway, second interface connection to client (I assume mode=ap-bridge). I do not know about interface to hotspotgateway (...

Your AP should act as transparent bridge, in other words add to bridge public and local interface of AP. Note, client interface (mode=station) does not support bridging, you need to use WDS if you have mode=station on public or remote interface of AP. i have this follows modes in my AP Access Point...

hi , i have this scenario internet ------------- hotspotgateway------------ AP with static ip same as hotspot range ----------------------- client connected to the AP the problem that the client dont take a automatic ip as suppose to do when i connect a client direct to the hotspot gatway every thin...

dear all , i have a mikrotik router setup as WDS AP how can i make this wireless Undiscoverable from the site survey An alternative (presuming understanding your intention) is to limit which devices can associate with the AP. regards/ldv sir , i need my ap to be hidden from site surveing how can th...

maybe you have some firewall blocking the scan? can you ping some devices from the dude machine?

no man from inside the dude software i cannot but from windows same machine i can

dir freinds
i installed dude and completing the discovery step but nothing found in the local map any help here please

You can order equipment directly from MikroTik or from any other distributor.

do you have a new dealers policy ?

you can look at the http://www.mikrotik.com
web-page provide information about distributors,
http://www.mikrotik.com/howtobuy.html

no one in lebanon or near

you can look at the http://www.mikrotik.com
web-page provide information about distributors,
http://www.mikrotik.com/howtobuy.html

no one in lebanon

sir can i know who is the Mikrotik dealer in lebanon

hi ,

is there any way i can hide my MK from being visible at the winbox scan ?

---- Hai Friends we killed Mikrotik's Login page with this, we are not aggree when our customers/clients see that page.... :wink: so, we are so sorry to Mikrotik and Team , because our router is not destination but it make routes for users from or to. chain=dstnat dst-address=[public_ip_or_local_ip...

please check if you web server is working
and if this rule is first one.

yes man this is the first rule and my web server is runing for sure

in /ip services disable or change port number for MT default page.

when i disable the port 80 it give me page connot be displayed

i need to redirect all the traffic on port 80 coming from the real IP to a internal web server , i added this nat rule 0 chain=dstnat in-interface=real dst-address=xx.xxx.xxx.x protocol=tcp dst-port=80 action=dst-nat to-addresses=192.168.0.216 to-ports=80 but when i try connect to my real ip from th...

Dir , i need to allow pop and smtp access to all my private network and this is my NAT rules ip firewall nat> pri Flags: X - disabled, I - invalid, D - dynamic 0 ;;; SMTP chain=srcnat src-address=192.168.1.0/24 protocol=tcp src-port=25 action=src-nat to-addresses=194.126.5.134 to-ports=25 1 ;;; POP ...

dear
i have this ip xx.xx.xxx.xxx nad the subnet musk is 255.255.255.252
in microtik what should i add xx.xx.xxx.xxx/??

that's not a good signal, try adjusting your antennas or changing the frequency. good signal is -60

in this case can i change only the ap bridge signal ?? or i must change't in all the points , and if i change the apbridge signal thru network i will loose the connection ?

100 -200ms something is wrong, should be <5-10ms You can use bandwidth test and server, have a look in tools menu (in winbox) What is you signal level? Can you change channel? I have 40km link with crappy LOS and get <5ms & <20ms under load. http://www.meraabi.com/Untitled-1.gif http://www.mera...

Please any help ???

In your hotspot profile try leaving the DNS Name blank

Same problem my freind , no login page

Good morning , i have this follows configuration : DNS [admin@HOT SPOT] ip dns> print primary-dns: 192.168.0.200 secondary-dns: 0.0.0.0 allow-remote-requests: no cache-size: 2048KiB cache-max-ttl: 1w cache-used: 19KiB DHCP [admin@HOT SPOT] ip dhcp-server> print Flags: X - disabled, I - invalid # NAM...