MikroTik

kapi2454

I have the same problem. I enter with my password , all work fine, I know my password. Then i notices that I´am on a testing firmware. Before update to a stable firmware I create another user admin called "forsecurity" with anoter new pass, I write on notepadd and then copy paste. Log out ...

kapi2454

:global currentIP :local newIP [/ip address get [find where interface="ether2"] address] :set newIP [:pick $newIP 0 [:find $newIP "/" -1]] :if ($newIP != $currentIP) do={ :set currentIP $newIP} I use this script, I hope it helps you friend. Hi, I try that but does't work, the va...

kapi2454

I just want to know how many IP are in each list, for that reason i create a lot of blacklist. drop the blacklist(s) themselves after being added to the list instead of repeating everything twice How can i add to a list and drop at the same rule? also consider dropping blacklist on fwd chain, drop b...

kapi2454

# oct/22/2023 00:34:07 by RouterOS 6.49.10 # software id = WWJQ-NH9X # # model = 951G-2HnD /interface bridge add name=bridge /interface wireless set [ find default-name=wlan1 ] name=wlan2 disabled=yes ssid=NOWIFI station-roaming=enabled /interface ethernet set [ find default-name=ether1 ] mac-addre...

kapi2454

Hi people, At this moment i notice that a lot of IP are hitting me. I have the next rule at the start of the firewall rules. add action=drop chain=input src-address-list=blacklist add action=add-src-to-address-list address-list=blacklist address-list-timeout=none-dynamic chain=input protocol=icmp ad...

kapi2454

Always worked for me. Maybe try a different browser/disable ad blocking/DNS filtering.
BR

Would you mind share your config? I open a new thread

viewtopic.php?p=976494#p976494

kapi2454

Hi beautiful people!! How are you? Well I have some time to test this (cake, codel, fq_codel). I have a simple pppoe connection. With default mikro script i gare top speed that i paid. https://i.ibb.co/j37JmgZ/Speed.png and this Bufferbloat https://i.ibb.co/dgJh8jw/bufferbloat.png If i configure som...

kapi2454

https://www.waveform.com/tools/bufferbloat

I test there but is not working nothing

kapi2454

Hi people!! I need some help I make an script to add rule in Firewall and NAT It's simple and was Working fin until not :S Firs Ask for the IP, External port, Internal port and Last a Name for rules The problem is in the part that get the Network IP # This line was working fine but now only print bl...

kapi2454

Some new idea?

kapi2454

This is expected as you've disabled the conntrack helper.
Code: Select all
/ip firewall service-port
set ftp disabled=yes

Yes i try it disable that. Now I downgrade to 6.40 and the problem keep :S

kapi2454

thank for answer!! user bug. by default work fine in RB3011UiAS-RM by default not work on 3x 951G-2HnD by defoult work fine in linksys or tplink why is a user bug? I disable all default rules in "/ip firewall filter" Probably conntrack FTP helper is turned off or behind dual NAT. Winnet FT...

kapi2454

Now I test in a RB3011UiAS-RM, and work fine. The problem are the 3x 951G-2HnD
Any idea?

kapi2454

Hi to everybody, I have a very strange problem here. One of my client buy a "new" software. The problem is that not work with mikrotik, and wor fine with tplink or linksys. I make a zoom to the code, And notice that the software login fine into a FTP server, but has error when try to uploa...

kapi2454

Hi, I have the same problem

kapi2454

I have the same problema.
In eth1 is conected a ONT pppoe working fine, but suddenly stop working. In ip -> dhcp client i see the fuc___ config. I delete it or disable it, and all working again.
It's a bug?

kapi2454

In my experience, you don't need to forward any port if you have a sip trunk in asterisk that is registered. If your Nat settings are off in asterisk, then that is your real issue. An asterisk sip trace or a packet trace of the sip and rtp network traffic will help you identify what is being sent. ...

kapi2454

Try with UDP starting at 7000 instead of 10000.

If I add this rule
add action=dst-nat chain=dstnat in-interface=ether5 protocol=udp to-addresses=192.168.0.100
Is the best way to cover all the ports?

kapi2454

ip > DNS > static > +

name=facebook.com
address=127.0.0.1

kapi2454

https://i.ibb.co/2hPC2hn/mikroSip.png Hi to every body! I need some help. If I call, they hear me, but I can't hear they (One Way Audio) First I Configure PPPoE, Then LAN Network (192.168.0.1/24), That Work Fine /ip address add address=192.168.0.1/24 comment=defconf interface=ether2 network=192.168...

kapi2454

Thank for answer but not work :( I create the list perfectly, then add chain=srcnat action=masquerade src-address=192.168.88.0/24 dst-address=192.168.88.0/24 but when add the other rule it give me an error. [mapet@MikroTik] /ip firewall nat> add chain=srcnat action=dst-nat protocol=tcp dst-port=8000...

kapi2454

Hi!! I have a DVR and this are the working rules add action=dst-nat chain=dstnat comment=DVR dst-address-type=local dst-port=8000 in-interface=all-ppp in-interface-list=!LAN protocol=tcp to-addresses=192.168.88.9 to-ports=8000 add action=masquerade chain=srcnat dst-address=192.168.88.0/24 dst-port=8...

kapi2454

Hi!! I have a DVR and this working rules add action=dst-nat chain=dstnat comment=DVR dst-address-type=local dst-port=8000 in-interface=all-ppp in-interface-list=!LAN protocol=tcp to-addresses=192.168.88.9 to-ports=8000 add action=masquerade chain=srcnat dst-address=192.168.88.0/24 dst-port=8000 out-...

kapi2454

Some news in this field?

kapi2454

I still have this problem, A simple PPPoE conection (Default Script) and a 3 or 4 device

kapi2454

After migrate to PCC load balance, port forwarding from outside it works correctly.

I have the same problem. PCC not work with some banck page, how dou you solve it?
Thankyou!!!

kapi2454

Hi to every body!! I try to config ECMP in my router, I have 2 WAN pppoe (120Mbps) and 1 fixed ip(10Mbps). ECMP work fine ever, but after about 10/15 minutes top working only Forwarding (DVR for example), internet keep working fine. (I like to only one PC use the fixed but I have the same problem in...

kapi2454

Do you mind put the complete config? I have the same problem and cant´t solve it

kapi2454

Hi to every soul in this forum, I really need some help. I have now in my work 3 WAN: 2 PPPoE and other fixed. I want to do the next. The fixed (WAN3) only have to work whit the server :192.168.1.2 WAN1 only for the ip 192.168.1.3-192.168.1.55 WAN2 only for the ip 192.168.1.56-192.168.1.254 That´s a...

kapi2454

Hi people, I new in ECMP but it´s working now. I have 3 WAN WAN1 and 2 are PPPoE and WAN 3 it Fixed/static IP All work fine, I run Speedtest (From Ookla) and something use Wan1 other wan2 and other wan3. This is fine. The problem is NAT (It was working with only one pppoe). Now I try to enter for wa...

kapi2454

+1 please

kapi2454

Well, it's working after a lot of works. I use this rules but doesn't work. /ip firewall filter add action=accept chain=forward dst-address=192.168.1.254 dst-port=3777 in-interface=ether1-gateway protocol=tcp /ip firewall nat add action=dst-nat chain=dstnat dst-port=81 in-interface=ether1-gateway \p...

kapi2454

can you write how your MT has internet? pppoe,dhcp,static ip?

very important.
pppoe, dynamic ip. Generally I use a dyndns addres. or in the mikrotik case I use the cloud address.
When that does't work I try to configure in the app the IP and note the addres.
It's doesn.t work too

kapi2454

Hello, By default MikroTik has Firewall enabled that block's all traffic initiated from wan side except dst-natted rules. Please try this port forward rule: /ip firewall nat add action=dst-nat chain=dstnat comment=port forward dst-port=8888 in-interface=WAN1 protocol=tcp to-addresses=10.155.15.2 to...

kapi2454

To verifying that work I only test my mobile app. In this app I have configured the IP direction (External or wan) mydvr.dyndns.org and the port 1234. I try changing the port to other and put the wan IP and not the dyndns address. for example: 196.68.56.48:4499 but it doen't work, whit this configur...

kapi2454

Hi people, I new in this world (not in linux). I bought 2 RB951G-2HnD Router to test it. I update the 2 devices. All work fine, I configure de PPPoE conections. etc Buen I Try to forward wan to lan with out success. The old Router (tp-link) work fine, the mobile app work fine to that means that I ha...

kapi2454

Some new about this?
I be in the same situation.

kapi2454

I have the same problem. Has you the answer?

kapi2454

Hi, did you find a solution?
I shared some files too, I need that support ntfs

Search found 39 matches

Re: Router OS 7.12.1 System User password change issue

Re: Looking for a script to update 2 public dynamic IP

Re: Big botnet hitting me

Re: Big botnet hitting me

Big botnet hitting me

Re: help with bufferbloat, fq_codel, codel and cake not working

Bufferbloat and Download Speed (not working)

Re: help with bufferbloat, fq_codel, codel and cake not working

Script that get the Network Value

Re: FTP with WININET.dll Problem (Visual Foxpro)

Re: FTP with WININET.dll Problem (Visual Foxpro)

Re: FTP with WININET.dll Problem (Visual Foxpro)

Re: FTP with WININET.dll Problem (Visual Foxpro)

FTP with WININET.dll Problem (Visual Foxpro)

Re: Static DNS Not on VLANs

Re: CHR - problem with dhcp-client after reboot

Re: Mikro + Asterix + One Way Audio

Re: Mikro + Asterix + One Way Audio

Re: Blocking facebook

Mikro + Asterix + One Way Audio

Re: 6.47 and Fordwarding Problem

6.47 and Fordwarding Problem

Re: v6.47 [stable] is released!

Re: RB951G-2HnD can't turn OFF LED

Re: DHCP Offering Lease Without Success

Re: ECMP Load Balancing port forwarding [SOLVED]

Port Forwarding Stop working after 10 minutes in ECMP

Re: RB 3011: Very simple VLAN scenario not working. [SOLVED]

2 PPPoE and One Fixed problem :S

ECMP Work fine, NAT Not working)

Re: Please add basic portScan tool ( port scanner scan )

Re: DVR Forwarding

Re: DVR Forwarding

Re: DVR Forwarding

Re: DVR Forwarding

DVR Forwarding

Re: Mikrotik as CLIENT OPENVPN with tls-auth static key

Re: OpenVPN only without static key

Re: NTFS support