I set the allowed-address of all peers on that Wireguard interface to the proper /32 and /128. Otherwise the same config as above. This did not change anything for me. Still only the last modified/enabled client works over IPv6. Test setup: Windows notebook, Wireguard client running. Continuously ru...

Ah of course, makes much more sense that way. Will change that, thanks!
(I had the proper adresses in there at some point before this IPv6 bug was introduced...)

What a mess of a config.

Just because of the addresses or is there something else?

*) wireguard - fixed IPv6 traffic processing with multiple peers;

Not fixed for me. See config example in viewtopic.php?t=180482#p914923

I still have the same issue. Only the client that was enabled last works. Clients also connect over IPv6 to the Wireguard server. As shown I also tried different settings for "allowed addresses" Configuration: # feb/22/2022 20:45:44 by RouterOS 7.1.3 # software id = W604-HIX1 # # model = R...

Quick first impression: Upgrading an mAP Lite from beta5 worked fine (config: dual-stack, basic Firewall, AP, Wireguard, EoIP)
EoIP/GRE keepalive seems to be fixed.

Thanks for the policy/proposal settings. Will change that.
Also I added a netwatch entry for 209.222.18.222 to my config (and updated the the script to not remove the route) - without the netwatch the connection dies after some time if it is idle.

Did you remove your IPsec traffic from fasttrack? I just posted my config example for privateinternetaccess.com VPN (https://forum.mikrotik.com/viewtopic.php?f=2&t=150179) connections where you can see it. I had similar issues - speeds seemed fine initially but the connection were unstable and I...

With 6.45.1 we got EAP authentication as IPsec initiator which makes it possible to connect to public VPN providers like privateinternetaccess.com (PIA). I wanted to share my configuration here including a script for setting up port forwarding through the VPN, in case anyone wants to setup this as w...

Same problem here as well. While TCP traffic between 1G <-> 10G is reasonably Ok - UDP traffic has huge losses and out-of-order issues. Streaming in LAN (NVIDIA GameStream) is unusable with SwOS 2.5 and 2.6. Downgraded to 2.4 and everything worked smoothly. (I am also using Mellanox Connectx-2)