MikroTik

JesseMathis

I just downgraded to 2.9.51 and everything is working great now. I think I'll stay at 2.9 until all seems well with v3.

JesseMathis

I lost all my interface information and had to reapply ip addresses to all interfaces. The addresses just showed Unkown interface. Everything is back in working order but I don't see any traffice under Queue tree in my custom queues. All the queue show no traffic even though traffic is passing. Also...

JesseMathis

Can the dude monitor services on a Windows machine? I know we can design custom services and probes but I don't know where to begin. I just want to be able to monitor certain services on some computers to see if the service is running or not running.

JesseMathis

I have my timeouts for Hotspot set for 2 days. Once the user logs in and disconnects I want them to stay logged onto hotspot for up to 2 days without being logged out. However I have my DHCP leases set low but I need them low for my wireless Basestation's DHCP relay table. When the user disconnects ...

JesseMathis

Thanks for the input but I am not using Cookies. I only have HTTP-CHAP enabled.

JesseMathis

Has no one else has ever seen this issue?

JesseMathis

Some of my users get logged off after the disconnect and every time they reconnect they are forced to log back in. I don't want this to happen. It does not happen to everyone. There is a log event that occurs when this happens. The log says Logged Out: Host Removed: Removed by static entry. Is there...

JesseMathis

Thank so much for the link. I guess I should have RTFM. ; - )

JesseMathis

Is it possible to move links after they are create while keeping the graph history. Example: I have some server interfaces with links to the subnet. I want to replace the subnet with the switch. It is still the same interface on the server but will beconnecting to the switch instead of the network b...

JesseMathis

: - (

No Help?

JesseMathis

I'd imagine that this will involve scripting in some way but help or pointers in the right direction will help me.

JesseMathis

Is it possible to dynamically block access attempts for a certain amount of times from an IP after a certain numbers of failures. I'd like to block input access to the MT if an IP fails 5 attempts at logon within a 5 minute period. After the account is locked out for 15 minutes I'd like to remove th...

JesseMathis

There is a Base Station with one access point setup to this one interface. Some clients want to be on different subnets using the same AP. Cisco has the ability to create subinterfaces for a single interface. Is this what is happening when you add multiple IP addresses (Different Subnets) to a singl...

JesseMathis

Awesome.

JesseMathis

What is the maximum number of IP addresses you can assign to an ethernet interface on a MT router? Is it hardware dependent?

JesseMathis

Thanks.

I was just curious if there was a way for me to conserve IP usage.

JesseMathis

What's the norm for configuring VRRP and assigning IP addresses to interfaces. For instance Do you just setup VRRP IP and assign to and interface and not assign a static IP to the interface itself. Primary Eth0 -- 192.168.1.2 Secondary Eth0 -- 192.168.1.3 VRRP for Eth0 on both MTs -- 192.168.1.1 So ...

JesseMathis

Sounds exactly like the problem I am having. I will try a reboot of the MT when I have no clients online.

JesseMathis

Strange. I enabled the OSPF logging and I can see the debug information showing that the packet addresses to 224.0.0.5 sent from the Loopback of the Mikrotik but I see nothing from the Cisco device. HMMMM.

JesseMathis

I have tried creating a map for about 2 days now and i can not get one to created. I've deleted it, changed the name, stopped and restarted the Dude server, and I have even backed up the config using export and reinstalled telling the install to reset the config. I then reimported the config but I s...

JesseMathis

I can't see any OSPF Hello's coming from the Mikrotik. I can runa packet scan and see the Hello's coming from my Cisco Router. When I run a debug on the cisco and a packet scan on the Mikrotik I see the cisco hello's but I never see a reply from the Mikrotik. I have the firewall setup to allow OSPF ...

JesseMathis

I think I figured it out.

I turned off Transparent proxy on the Hotspot profile and now it seems to be working.

JesseMathis

Err the crude pic did not show up correctly. Let me explain how everything is physically connected. Cisco Router (internet) is connected via ethernet to Mikrotik Eth2. I have 2 Vlans configured on the Mikrotik. Vlan 10 is for Servers and Vlan 20 is for Clients. Both of the Vlans are set to physical ...

JesseMathis

There is a route to the client subnet on the Mikrotik pointing to the interface in which the AP (Navini Base Station) is connected. Below is a crude layout of the network. Route to client subnet is pointing to Clients interface which is a vlan configured on physical interface eth5. ---------------- ...

JesseMathis

I have clients using hotspot to get on the internet. I want client to authenticate on the webpage and then have open access to the internet. I have NAT turned off. (The hotspot ip-pool feature is turned off.) Clients get an IP from the DHCP server. All this works fine and clients can browse the inte...

JesseMathis

Sorry I mean that I can ping them from the Mikrotik. Maybe something was fishy with the radio yesterday.

JesseMathis

I can not ping Hotspot clients from the Mikrotik. I was thinking that if 2 clients on our network need to communicate with each other (using Vonage or P2P software) then they will be able to at least ping each other. It doesn't seem the Mikrotik is allowing this. Is there a special setting I need to...

JesseMathis

Did some testing finally. Hotspot assigns an IP to the Linksys then once a machine behind the linksys authenticates on the hotspot page every other device behind the linksys can surf the net. this i great news for me.

JesseMathis

No one can help answer? Please!

JesseMathis

I am having issues with PPPoE and my access point so I decided to give hotspot a try. I like the hotspot much better because it is easier for the client to use but I have some questions. Can I have hotspot logoff a user from a session if they are signed in on another computer? Can Hotspot be used fo...

JesseMathis

No one knows how to do this?

JesseMathis

How can I change the default dynamic PPPoE queue from default-small to something else like default?

JesseMathis

I fell like an idiot. I overlooked the subnet mask on the network command on the mikrotik and Cisco. They were wrong. I have corrected this. I added a rule in the firewall to allow OSPF protocol traffic from the Cisco IP and Cisco Loopback. Everything is working now!!!

JesseMathis

From the Mikrotik I can ping 224.0.0.5 and get a reply from the Cisco Router from the Cisco's interface IP. The Mikrotik does not reply. From the Cisco I can ping 224.0.0.5 and get a reply from the loopback IP of the Cisco Router. The Mikrotik does not reply. I must have something configured incorre...

JesseMathis

Since the link is a 100Mb/s ethernet connection I have change the cost on the Mikrotik from 10 to 1. This is what the 2800 has the cost of the link to be. Still no luck. I am going to try running some debugs on the cisco to see what is happening.

JesseMathis

Is this enough information? MIKROTIK Interfaces 0 interface=ether2 cost=10 priority=1 authentication-key="" network-type=broadcast retransmit-interval=5s transmit-delay=1s hello-interval=10s dead-interval=40s Networks 0 68.153.44.232/30 backbone 1 68.153.44.240/28 backbone 2 68.153.44.227/...

JesseMathis

I should have clarified the connection. The cisco and Mikrotik connect to a Cisco 3650 switch. Both ports are in the same VLAN.

JesseMathis

I am trying to get the Mikrotik to establish a neighbor relationship with the cisco router. An ethernet interface on the Mikrotik is connected with the Cisco's gigabit ethernet interface. If you have input rules in the firewall will this block the multicast traffic and Hello packets coming to the Mi...

JesseMathis

How does this look? I wasn't sure about removing passthrough on the VOIP Packet marking because the next after this changes the TOS on all VOIP Packets that are marked. If I remove passthrough on the Voip Packet mark will the change TOS rule still work even though it is after the Voip packet mark ru...

JesseMathis

I think I need to add a rule to give DSCP EF traffic priority 1.

JesseMathis

I am new to QOS and Mikrotik and would like for someone to verify that my configs are correct. I want to give VOIP traffic high priority, P2P traffic lowest priority. HTTP traffic Med-High priority, and all other traffic Medium priority. These are my MANGLE Rules. 0 ;;; VOIP Traffic - RTP chain=forw...

JesseMathis

I knew that you can change the speed of the link or set the link to Fast Ethernet, Gigabit, Etc. However I am unsure as to where the thresholds are set so that the visual line you see for the link will turn red when the line bandwidth is being slammed. Is this set by Mikrotik?Can the end user change...

JesseMathis

Thanks.

What is it called when the link turns red because it is saturated? Where can I change the threshold? Also can I get e-mailed when a link gets saturated?

JesseMathis

I have setup e-mail notifications. In the section that says On Status what does Unstable mean? Is it for links that become saturated and turn red? I am looking to get e-mailed when a link becomes saturated or would really like to change the threshold to allow me to get warned when a link is up to 85...

JesseMathis

Thanks for the comment. I think that the basestation may do trunking. I'll have to check though. It is a Navini Basestation.

JesseMathis

I have a mikrotik router that will assign public IPs to my clients. I have a switch setup with Servers on VLAN 10 and assigned private IPs (10.x.x.x). The Mikrotik is connected to the switch using s trunk port. I have created 2 Vlan Interfaces one is 10 and the other is 20. VLAN 20 is assigned to th...

Search found 46 matches

Re: Problems after update from 2.9.45 to 3.6

Problems after update from 2.9.45 to 3.6

Monitoring Service on Windows computers

Host getting logged out of Hotspot. Please help

Re: Hotspot Logoff

Re: Hotspot Logoff

Hotspot Logoff

Re: Securiing access to Mikrotik Router.

Moving Links while keeping graph history data.

Re: Securiing access to Mikrotik Router.

Re: Securiing access to Mikrotik Router.

Securiing access to Mikrotik Router.

Multiple IP addresses on one interface

VRRP IP assignment question

Loading Maps problem with V2.2

OSPF hello problem.

Hotspot Dynamic NAT and Firewall issues

Client communication behind hotspot

Hotspot questions

Dynamic PPPoE Queue Question

OSPF issue with Cisco 2800 router [solved]

QOS Verification with configs.

Question about Service Status

BaseStation, VLAN, PPPoE question.