For me the key setting was to go on the CAP-AXs edit bridge to vlan-filtering=enabled, disable ingressfiltering and then assign vlan id to the uplink interface as tagged. As then the whole thing started working... unfortunately the documentation misses this part https://help.mikrotik.com/docs/displa...

Hello, I am configurating the WifiWave2 package on a hAPax2 router running on WinBox v7.6 (arm64). Both of the interfaces (wifi1 and wifi2) say that there are no supported channels. What is the reason for that and how can I fix this? I have added my configuration script as an attachment as well as ...

same issue here as with TO - tried your solution with removing mac but no luck still

Hi cbka, which device do you use as capsman?

HAP AX^3

same issue here as with TO - tried your solution with removing mac but no luck still

Fortinet builds vxlan tunnel for fex in lan mode . There are some config examples for that . Maybe you can check those ... there is an isec tunnel established with an IP address on tunnel interface on each side. Vxlan endpoint ist than mapped to these interfaces' IP addresses

Cheers

Send nudes ...ahm config

Why do you have the "no Track Chain=prerouting" ?
that seems the source of your problems...

what would be the alternative 2 this ?
sorry for the delayed answer

If you want to use fireguard.........oops wireguard LOL, it takes 10 minute max to setup. Not familiar with ipsec and its best suited for an enterprise environment anyway

hi There, unfortunatly this is no optoin as the ipsec config is used for alwaysOn VPN

Hi folks, i am trying to setup a ikev2 road warrior scenario where all traffic from the client should be routet through the IPsec GW my problem is that the "no Track Chain=prerouting" disables masuqerading for the clients and so no traffic is passing... any quick advise how to accomplish t...

[admin@demo.mt.lv] > /system health print oid active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0 voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 processor-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0 current: .1.3.6.1.4.1.14988.1.1.3.13.0 power-consumption: .1.3.6.1.4.1.14988.1...

on mtik3 i see incoming ICMP from zabbix with src-address 172.24.255.1 but i can not receive echo reply on zabbix How exactly do you "see" it? Using /tool sniffer or using some action=log or log=yes firewall rule? I would suspect most a firewall rule in chain input of /ip firewall filter ...

anybody ?

sorry for that .. must have missed that part...

maybe can u post the log output ?

hi

have u tried enabling ipsec debugging on mikrotik side ?

Hello my follow tiks :-) We have kind of a situation here... i have zabbix 172.30.5.190 with default gw mtik1 mtik 1: ether2 - 172.30.5.1/24 and mtik 2: ether2 - 172.30.5.110/24 ether3 - 172.24.255.1/24 and offsite mtik 3: ether2 - 172.24.60.1/24 mtik1 is default gw for zabbix and i added a route to...

any news on this ?

So .. some progress on this ... i tried https://wiki.mikrotik.com/wiki/Per-Traffic_Load_Balancing ... so far so good. but now the packets get lost somehow ? i need to reach https://XX.XX.XX.XX:4444 (sophos webadmin) over interface pppoe-dsl1 routing-mark=dsl1 I've setup mangle and masquerading accor...

Hi all,

i have the situation that i need to establish connections to a specific port over a specific wan interface (because other host accepts only connections from this wan-interface ip)

Where to start ?

Thanks in advance,

Cheers,
Chris

Thanks for your response. What do. you think is wrong with Them? the Adresses are different in real just didnt want to Post them Here .I always thought that /29 has 6 adresses ?!?

Cheers,
Chris

Hi,

correct me if i am wrong but:

doesnt the write go to RAM ?

Cheers,
Chris

hello,

pls post config

Cheers,
Chris

Hey there,

are u totaly sure about the IPs and Subnets given ? /23 ?

pls provide full config or screenshot of firewall and NAT

Did you use Wizard ?

Lancom has DHCP-Server enabled on ETH4 ?
Mtik has DHCP-Client enabled on ETH3 ?

Cheers,
Chris

Hello @ll we have a situation here... in our lab we've tried to setup the following: vrrp.png now the thing is, we cant ocmmunicate over ISP WAN Infrastructur for doing ARP Broadcast of VRRP So we tried to build a 'sync interface' over the SFP+ Connection between the two CCR We've setup a bridge cal...