MikroTik

wissammohamed

Hi all,

i have these scripts

ppp secret disable farqad

ppp secret enable farqad

the script is to disable and enable user named farqad in specific time

the problem is how can i remove him from the active connection when the user disabled ???

please help me with that

thank you all

wissammohamed

hi i see this commands in another forum, and i don't what the useful from it ip ipsec policy add src-address=100.0.0.0/24:any dst-address=200.0.0.0/24:any protocol=all \ action=encrypt level=require ipsec-protocols=esp tunnel=yes \ sa-src-address=10.0.0.2 sa-dst-address=10.0.0.1 proposal=default \ m...

wissammohamed

one card, why more? just redirect all requests to port 80 from users to squid, and from squid to mikrotik proxy or (it would be better) setup squid with direct internet access, redirect users to mikrotik proxy without cache, and set squid as mikrotik parent proxy how can i do that ? and as i sad i ...

wissammohamed

is there any one did it????????????

and another question, how many LAN card i need in squid box ??

wissammohamed

hi guys i need to install squid proxy with mikrotik as a parent proxy, cause mikrotik cache is not good. i need to know how to connect the squid box with mikrotik ( i mean with the network or directly to mikrotik machine) and how to configure the squid proxy to work with mikrotik if any one useing t...

wissammohamed

Hello all i have question in wireless i have two Lan wireless, the details about them below: 1-Wireless (Atheros AR5213) (D-link) chip info : mac:0x7/0x9, phy:0x45, a5:0x56, a2:0x0, eeprom:0x5001 2- Wireless (Prism) (Senao) firmware : 1.1.0/1.7.4, compid 0x800c i need to know the best wireless lan f...

wissammohamed

Hello all i have question in wireless i have two Lan wireless, the details about them below: 1-Wireless (Atheros AR5213) (D-link) chip info : mac:0x7/0x9, phy:0x45, a5:0x56, a2:0x0, eeprom:0x5001 2- Wireless (Prism) (Senao) firmware : 1.1.0/1.7.4, compid 0x800c i need to know the best wireless lan f...

wissammohamed

thanks man

wissammohamed

thanks man

wissammohamed

hi all

i want to run this script

/ppp profile set pppoe-profile rate-limit=40k/64k 128k/256k 16k/32k

but it didn't work, i think the problem with (40k/64k 128k/256k 16k/32k)
i don't know how to write script

plz help me

wissammohamed

plz any one

wissammohamed

hello all

i broadcast with lan wireless (senao mini pcmci ) how to enable mac filter?

thanks

wissammohamed

any one plz

wissammohamed

hi all
i want to know how to cache a website in MT 3.0
for example

i want to this site http://www.finetune.com/ in MT server so i can browse the site fast

thanks

wissammohamed

hi guys

I'm now running the cache with hotspot and everything ok
i want to know if i can run cache with pppoe service?

wissammohamed

any idea plz

wissammohamed

Hi guys, my name is wissam, i'm from iraq here in iraq we have problem with slow 2-way internet connection (slow download)with high prices , and we have 1-way internet connection with high download speed and nice prices, so i thought to mergeing 1-way(with high download speed) and 2-way (upload spee...

wissammohamed

plz anyone

wissammohamed

any idea

wissammohamed

hi guys i have problem with my 2way internet connection(slow speed) , so I thought to merging oneway with 2way but i stoped with the connection between oneway and 2way and the mikrotik. my thought is like this http://img140.imageshack.us/img140/5338/81703505ue6.jpg so plz anyone know what im talkin ...

wissammohamed

plz help me

wissammohamed

level 6
featuers extra-channels

wissammohamed

any idea

wissammohamed

hi guys i have users connest to my MT with lan,lan wireless, and ap client i configered pppoe the users who connect to my MT from lan and lan wireless work fine the problem is i have 5 users connect to (one AP client) when i see the log the 5 users keeps login and logout every 30 sec- 1 min i discov...

wissammohamed

any help plz

wissammohamed

hi guys
i have problem sending backup file to my gmail
i need help
i searched the forum but i can find solution
i thought the problem is with my gmail cause he's scure
and if the problem is with my gmail i need unscure email from another company

thanx

wissammohamed

hi guys

i have access point client (d-link ,micronet ,planet)
these ap have option (mac clone)
i need to disable this option

any ideas

thanx

wissammohamed

any one plz

wissammohamed

i do this

is this right

wissammohamed

wissammohamed

thanx for ur replay
plz can u be more spesific
step by step plz
im new in mikrotik and scripting

thanx again

wissammohamed

any one plz

wissammohamed

hi guys
i want to scheduler limit the bandwith for each user
i want this
from 9am to 23pm ( the bandwith for each userequal to 50kb/30kb)
and from 12am to 9am (disable the limit of bandwith for users)
how to do that
plz help because im new in scripting
thanx

wissammohamed

any help plz

wissammohamed

hi guys
i want earse license from my hard drive
i tried to format the HD but the license still there
how to delete this license from HD
thanx

wissammohamed

how to make it work every day in the set time

wissammohamed

help me

it's not working
in 1am it's work fine (enable to download avi,mpg ......)
but at 6am it's does't disable it
im crying now

wissammohamed

thanx

wissammohamed

thanx

wissammohamed

how to do that plz

wissammohamed

anyone

wissammohamed

hi everyone

i block these in proxy (avi,wmv,wma .......)

and i schedule it to enable from 1 am to 6 am

i need to edit Access Denied page to inform the users ,they allow to download these extention from 1 am to 6 am

how can i do that

thanx

wissammohamed

thanx man
preciated ur assistant

wissammohamed

tell me it's gonna work and make me happy

wissammohamed

ok thanx i did this [admin@MikroTik] > system script print 0 name="block_download" owner="admin" policy=ftp,read,write,policy,winbox run-count=0 source="ip proxy access disable [f]" 1 name="open_download" owner="admin" policy=ftp,read,write,policy,wi...

wissammohamed

what do mean [f]

i do not understand what u mean by that [f]

can u do it for me

plz

im new in mikrotik

wissammohamed

thanx for ur replay normis ok i do this i hope it's right proxy ip proxy access add path=avi action=deny ip proxy access add path=:.mpg action=deny ip proxy access add path=:.wma action=deny ip proxy access add path=:.wmv action=deny script [admin@MikroTik] > system script print 0 name="mpg&quo...

wissammohamed

what u mean
i don't understand

wissammohamed

hi guys i use webproxt-test in the proxy i blocked users to download video (avi , mpg .wma , wmv .... ) ip proxy access add path=avi action=deny ip proxy access add path=:.mpg action=deny ip proxy access add path=:.wma action=deny ip proxy access add path=:.wmv action=deny now i need to allow users ...

wissammohamed

any help

wissammohamed

hi guys i use webproxt-test in the proxy i blocked users to download video (avi , mpg .wma , wmv .... ) ip proxy access add path=avi action=deny ip proxy access add path=:.mpg action=deny ip proxy access add path=:.wma action=deny ip proxy access add path=:.wmv action=deny now i need to allow users ...

wissammohamed

guys anyone
i need to work this rule so badly

wissammohamed

hi i cearte this rule from this example http://wiki.mikrotik.com/wiki/PCQ_Examples [admin@MikroTik] queue> simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="queue2" target-addresses=192.168.100.0/24 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=4 ...

wissammohamed · upgrade what the diffrent between 2.9.27 and 2.9.40

what the diffrent between 2.9.27 and 2.9.40

wissammohamed

sorry for that ...
but i disable it because if i enable it (every 10 min. , dns requset time out)

wissammohamed

i cearte this rule from this example http://wiki.mikrotik.com/wiki/PCQ_Examples [admin@MikroTik] queue> simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="queue2" target-addresses=192.168.100.0/24 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=4 que...

wissammohamed

help plz

wissammohamed

hi guys i have this problem i use MT two weaks ago i use this configurartion hotspot [admin@MikroTik] ip hotspot> print Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PROFILE IDLE-TIMEOUT 0 X hotspot1 ether1 dhcp_pool1 hsprof1 10m webproxy [admin@MikroTik] ip proxy> print ...

wissammohamed

thanx for everyone whos replay to me i cearte this rule from this example http://wiki.mikrotik.com/wiki/PCQ_Examples [admin@MikroTik] queue> simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="queue2" target-addresses=192.168.100.0/24 dst-address=0.0.0.0/0 interface=all pare...

wissammohamed

any one plz

wissammohamed

hi guys i need to schedul these rules to run in spesific time [admin@MikroTik] queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 D name="<hotspot1>" dst-address=0.0.0.0/0 interface=ether1 parent=none direction=both priority=8 queue=hotspot-default/hotspot-default limit-at...

wissammohamed

hi guys

my Internet BW is 512kps down /256kps up
i need to divid Equally the BW for active users Automatically
EX
when 10 users is active the BW for each one is 51.2kps down / 25.6kps up
when 20 users is active the BW for each one is 25.6kps down / 12.8kps up

thanx

wissammohamed

thanx for ur replay
is this work when i use mac filter for users
i need to athu. users by username and password and mac filter
note i have 40 users
10 users for each access point
and what if i disable addresses per mac
what will hapend

wissammohamed

anyone plz

wissammohamed

hi guys i have users connest to my MT with lan,lan wireless, and ap client i configered hotspot...... and put the shared key=1 the users who connect to my MT from lan and lan wireless work fine the problem is i have 5 users connect to (one AP client) when i see the log the 5 users keeps login and lo...

wissammohamed

[admin@MikroTik] > ip pool print
# NAME RANGES
0 dhcp_pool1 192.168.100.2-192.168.100.254

wissammohamed

what this means in my log failed to get ip address for host 00:60:43:00:42:d6/ 65.11.740.225 : pool empty(6) [admin@MikroTik] > ip dhcp-server print Flags: X - disabled, I - invalid # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 dhcp1 ether1 dhcp_pool1 3d and what this ip means 65.11.740.2...

wissammohamed

any idea

wissammohamed

hi
is this option exist in MT

Web Proxy Auto-Discovery (wpad)

and how to configure it

thanx

wissammohamed

thanx for ur replay i cofigured the web proxy with these rules [admin@MikroTik] ip proxy> print enabled: no port: 8080 parent-proxy: 0.0.0.0:1 maximal-client-connecions: 1000 maximal-server-connectons: 1000 [admin@MikroTik] ip proxy> .. [admin@MikroTik] ip> web-proxy [admin@MikroTik] ip web-proxy> p...

wissammohamed

hi i read the manual for blocking .mp3 .avi i di this do block mp3 [admin@MikroTik] ip web-proxy access> print Flags: X - disabled, I - invalid 0 ;;; block telnet & spam e-mail relaying dst-port=23-25 action=deny 1 url="add url=":\\\\.mp\\[3g\\]$" action=deny" action=deny it ...

wissammohamed

i have 40 users and 30 rules
what u think

wissammohamed

anyone

wissammohamed

hi
this line appeared in my MT log

login failure for user webmaster from 218.188.21.102 via ssh
login failure for user admin from 218.188.21.102 via ssh
login failure for userwebadmin 218.188.21.102 via ssh

what's wrong

wissammohamed

same problem
we need help

wissammohamed

hi 1-these lines appears in log failed to get ip address for the host 00:70:a4:02:11:22/70.66.214.18 pool empty (6) what cause this error need help with that 2- in syytem resource [admin@MikroTik] system resource> print uptime: 1h2m6s version: "2.9.27" free-memory: 227248kB total-memory: 2...

wissammohamed

Disable HotSpot uniuversal client feature,
'ip hotspot set 0

what do mean with that

wissammohamed

thanx for ur replay sergejs
but i need to ask u what Usefull of 'address-per-mac'
and what it mean "address-per-mac=2"
i will try it and replay to u
thanx again

wissammohamed

hi
i need to block site that contain sex word and any word i want
thanx

wissammohamed

Most likely problem is with your AP, that is performing MAC-cloning (using one MAC-address for all connected clients). You need to increase 'addresses-per-mac', if they are using the same login/password data, then you need to incerase 'shared-user' option. thanx for ur reply the users have diffrent...

wissammohamed

ANY ONE PLZ

wissammohamed

ANY ONE PLZ

wissammohamed

hi
one : i need to block Extension like avi , mpeg
secend: i need to block the download size of the file to 100MB
to block evrey reguest to download file over 100MB

thanx

wissammohamed

hi guys i have users connest to my MT with lan,lan wireless, and ap client i configered hotspot...... and put the shared key=1 the users who connect to my MT from lan and lan wireless work fine the problem is i have 5 users connect to (one AP client) when i see the log the 5 users keeps login and lo...

wissammohamed

hi guys
i need to close p2p programs
most my users only browseing the internet and using yahoo messenger
i want to close all ports Except 80 and (yahoo messenger port)
i need to know if this will Cause problem in MT and for users
thanz

Search found 85 matches