Hi all, could you please so kind tio help /assist me ? I have the setting : Draytek Modem ->MT RB 2011iL -> Fritzbox Router (as client only for telephony). It works everything..but sometimes if i get an in call or fax the complete pppoe is disconnecting.. and thats the bigger issue the telephony not...

Hi and thank you ... ok.. i will check that as i bought the Vigor 167 --hopefully this will work better..if not..then i will change to Zyxcel.. if i had this information before i am shure it would have bought the Zyxcel first

Hello and thank you first. but probably i need your knowledge to help me .. what i did : i went back to an earlier version od the modem firmware..probably the one i checked first to rollback was not the same as they are nearly same time . Start MT .. and after few tries it worked. :) But over the la...

hey guys, as i had sometimes disconnects i decided to update the vigor 130 Modem to newest version. I did better not damn.. now the Modem is up to date .. and i can see that it syncs ..also it connects when i enter in modem the pppoe username etc also i am able to connect via a pc connected directly...

Hi all, i dont know if i am right but hope someone can help me. System RB2011 6.48.6 .. Vigor Modem 130 for pppoE and a AVM Fritzbox (just for telephony). As is am confronted for some while with following: Mostly if i get an phone call or a Fax ..the Internetconnection is broken. And i dont know why...

Hi,

is i have the issue too...i set this to yes and will see if this has an impact. But not really shure if this is a risk for the own system?
What do you mean?

thanks
Regards
Cyb

Hi all, noone who can assist a bit? Also with the new version 6.48.3 i am not able to run my Iptv . It works 10 seconds and then hang up - think when change to Multicast, example -- in the debug log for igmp-proxy there comes the message : ignoring request from unknown adress -"alternative-subn...

you must add separate package multicast and enable igmp DO NOT INSTALL (copy inside files and reboot) ALL, ONLY multicast package!!!!!!!!!!!!!!!!!!! https://download.mikrotik.com/routeros/6.48.2/all_packages-mipsbe-6.48.2.zip On future when ask routerboard to upgrade, it download automatically futu...

Hi all , i am nearly new in MT and ask for your help, MT RB2011iL and 6.48.2 OS behind a Vigor 130 Modem VDSL2 100Mbit 2 Things: First is i randomly run in disconnects via pppoE the login reprocess takes a few minutes .message is peer is not responding.. can i debug that..and how best way? The provi...

https://help.mikrotik.com/docs/display/ ... VLAN+Table (newer)
https://wiki.mikrotik.com/wiki/Manual:Bridge_VLAN_Table (older)

Put your feet in the water and attempt a config.

Hi anav..
that´s what i need :) thanks a lot .. i will study it and hope understanding now :)
greets

viewtopic.php?f=23&t=143620

Hi anav.
thanks first..i read this before..but to be honest...i cant figure out my understanding Problem there :(

Hi all , just newbie in MT and have a problem to understand how it works fine... Coming more from the cisco side so i know trunk, access ports and so on a bit.. so set uo cisco = Router / and Switch with uplinked trunk where all vlans are in ok. Switch has the access ports and the router should rout...

Hi p3rad0x and thank you first of all, i have the software for the UBs and so far it works fine, Also the idea you meant is great but i forgot one thing to say ..the 2nd UB is only temporarily in the backyard on. So in the house i have only one UB and the FB. But i will think about to to it like you...

Hi all, my currently setting at home is a cisco Router for WAN behind a PPPoE Modem. To this Router hits a Cisco 2960 Switch and currently for SIP Telefony and one WLAN SSID a Fritzbox 7490. For my Wireless i have actually 2 Ubiquiti APs in work and so far it works pretty good except roaming as the ...