MikroTik

ivanperino

add static entry in "/interface sstp-server" menu

YOU ARE RIGHT thank you very much.

ivanperino

Hello community, We have OSPF over a SSTP link. Such interfaces are fixed static on OSPF->Interfaces in order to chage default cost to a fixed one. When SSTP falls down because any failure, it becomes unknown in OSPF->Interfaces. Then, when SSTP goes up again, it appears as a dynamic Interface with ...

ivanperino

ZeroByte: I really appreciate your answer. We have already tryed to set a Loopback interface just creating a bridge without any port. But guess that, DCHP server didn´t work, i.e. it didn´t deliver any IP to DHCP client. It seems that DHCP request "must" enter through the interface where D...

ivanperino

How I can filter a route just over an specific interface?

I want the default route to be published if main route is available, but I dont want the default route to be published if the secondary route take place.

ivanperino

HI My DHCP-server is a PR732 and DHCP-relay is a RB750GL. Connection between them is made through two different interfaces. RB750GL reaches PR732 via eth1 and via eth2 (it is because redundancy). RB750GL performs a DHCP-relay where DHCP-server-IP is the one at the eth1 in PR732. DHCP-server in PR732...

ivanperino

Hello specialists, I am investigating and making some probes with VRRP before applying to the main router in the company. One of my question is about the whole configuration a router could have. For example, DHCP servers, leases, firewall rules, Routing protocols, etc must be in both routers ? When ...

ivanperino

Dear specialist. I am writing a new network project for a specific client. I was asked to report which of the ITU recommendation the equipments (mikrotik of course) comply for. Sincerely, I do not know where I should start finding! Does Mikrotik have any document that discuss about these issues? I w...

ivanperino

My principal router is an Intel PC running RouterOS 4.6 with level 5 RouterOS lays on a Standard HardDrive. I need to move the Hard Drive to another PC because the original one is failing. May I move the System without any further dangerous implications? I am afraid the system will not startup. I wa...

ivanperino

Dear Specialists. Is there a way to Upgrade ther outerOS in many routerBOARD at the same time??? I mean, without entering through winbox each time/each router. We have about 25 units working (routerBOARDs and x86) and Upgrading them becomes a bit cumbersome. I thought NetInstall could do it but NO. ...

ivanperino

Sergejs. I dont understand when you say "have you got support for this card"
Could you explain me a bit more? I am very interested on make this work
Thank You

ivanperino

I am newbie on GPRS modems, soi I would need some help to get this working. I am using a ZTE modem MF110 which is UMTS HSUPA compatible. When I plug it into the 433UAH a new line apperas in System -> Resourses -> USB. 2:3 ZTE,Incorporated ZTE WCDMA Technologies MSM... 480Mbps However, the ppp serial...

ivanperino

Hello dears I have found in RB1000 with RouterOS 4.2 a big problem. After I set a new IP address over an ether interface, everything seems work fine, when I set any comment on it, this becomes unavailable!!! ping stops responding and I must to disable and enable the IP address for this to response a...

ivanperino

It is very useful. However, I would like to know if I can send binary data through serial port given that device connected to RS232 port is not ASCII based. On the other hand, I would need to use the propietary software that is intended for the device at issue. Such software uses COM port in the PC,...

ivanperino

Dear everybody. I was wondering if there is any way to setup a router (let's say a RB433 for example) for RS232 remte conection through any known program for comversion. It should allows us to connect to a Virtual COM port in a PC and then be transmitted by IP to the remote RS232 in the Routerboard....

ivanperino

Sorry, 47; you are right. Any other Idea? I think EoIP over L2TP is nonsense giver L2TP offers almost the same characteristics than EoIP why should I implement EoIP over L2TP?? what about the payoad? In that way, I will only exploit less than 20% of bandwith! Useful load over EoIP over L2tp over IP....

ivanperino

Hello there. I am using EoIP over internet directly between two routers, I am not sure if this is a good practice. I set up an EoIP in each router at each end. The first one has the public remote address of the other router and vice versa. The thing is, there is not any security setting in order to ...

ivanperino

I can select Ping from the Tools button and successfully ping the device. This has happened to me. This seems to be a problem related to the user permisions in the dude agent. When you add an agent to the dude server, you must submit with an User and Password for the agent. If such user has no full...

ivanperino

Thank you very much

ivanperino

I have worked with dude for 2 years and something weird has happened last time. The backup file size has become too big. See the list of backups: ... bup-dude-2008.09.12.xml 10.062Kb bup-dude-2009.06.24.xml 23.472Kb bup-dude-2009.07.01.xml 210.853Kb bup-dude-2009.07.08.xml 213.605Kb ... Suddenly, fi...

ivanperino

Hello. I have connected an APC UPS through serial port. Does anybody know how to proceed for UPS on-battery monitoring? I thought there would be a On-UP / On-DOWN windows for scripting as it exists in Netwotch tool. Is there any other way to take an action over a power line failure than Checking UPS...

ivanperino

thank you very much Chupaka, It was very useful.

ivanperino

My question is about Interface limiting / queue. Suppose I have a eoip_interface that runs over the ether1 because ether1 is my internet conexion. If I set any policy over ether1, is eoip_interface also affected? Let´s say changes in MTU, rate limiting, marking packets that pass through the ether1.....

ivanperino

Hello SPecialists I need to set up a route in a VPN user. I am using PPTP in RouterOS v4. I mean, when remote user is connected to the VPN, this should only uses the VPN service for 10.0.0.0/8 network. Any other IP (public or private) should be routed by his regular internet connection and not throu...

ivanperino

Hello there.
I cannot find OSPF settings in the newest versions 4.x
In previous versions, You were able to change type 1 or 2 from a buttom placed in the bottoms bar in the Interfaces Tab.
It has disapeared!!
Does anybody know how to set those parameters in version 4??

Tahnk you
Ivan Perino

ivanperino

Hello everybody. I need to set up a remote repeater with solar panel and batteries. I lack of power lines on there. Could you recommend me any specific implementation? Some RB with low power feature may be? I need 2 wireless card (one for distribution and one for backhauling). I know I should set th...

ivanperino

Dear Specialists:

I would like to know how to implement a script for saving configuration periodically but in a remote manner.
I mean, save Router configuration and then send it by ftp or something similar. I think it is already well solved.
Thank you very much

Ivan

ivanperino

Hello there.
How I can set an User and Password for the Dude Agent in the Router where de agent runs?
In the dude server I set dude agents but they work only with "admin" and no password. If I set (for example) user: dude password: 1234 , the agent does not pick up.

ivanperino

I just Want to allow access to only those computers that was given a IP through the DHCP server. I need to Block forwarding to every fixed IP address.
To summarize. Only ip address leased by DHCP should by forwarded.
Does anybody know how to do it?=
Thank You

ivanperino

Thank You Louis for your help, But again, I have tested VRRP with equal priority as I said in the post (=100). Despite Priority, the same Router becomes the master when both routers are available and decision depends on IP address (as it is specified in the wiki. please, take a glance on http://wiki...

ivanperino

Chupaka, I am using 3.25. I have read all posts concerning VRRP and also examples from Wiki, RouterOS manual, etc. The point is ip address afect Master election despite of Preemtive Mode OFF. I have changed IP address and this happens all the time, I mean, I have found where the problem resides but ...

ivanperino

Dear friends. I have set up 2 RB433AH with VRRP and they are not working as in example given in WIki. I set Preemption-mode = OFF. all configuration is correct and match to the example given in Wiki. see below. ======================== VRRP without Preemption Each time when router with higher priori...

ivanperino

I'm sorry ChangeIP. I've read your post once and once again, but I am afraid not to understand you very well. Could you give me an example of you are advicing to me? I would really apreciate it very much. I´ve thought to implement a dedicated DNS server independet from RouterOS, I dont know, may be ...

ivanperino

Hello specialists. I would like to know if there is any way to implement more than 2 DNS servers in IP->DNS. I mean, I would need to implement a DNS server on RouterOS for all domain names in a company but with more than 2 External (public) DNS. So, computers in the network will have only 1 dns serv...

ivanperino

Dear Chupaka, pref-src is exactly for doing that. Suppose you have more than 1 internet connection and only 1 default route. So, what if you want to reach the router from outside (internet) to the public address in the router??? router will reply but it will do it by using default route which is nec...

ivanperino

v3.20 over x86 # DST-ADDRESS----------PREF-SRC------GAT-STATE----GATEWAY-----DIST--INTERFACE 0 A S 0.0.0.0/0----------200.47.9.180---reachable------200.47.9.190--1------vlan10 1 S 0.0.0.0/0--------------------------reachable------pppoe-1-------1-----pppoe-1 2 ADC 10.9.0.0/24-------10.9.0.1----------...

ivanperino

Let´s to say there is a network very limited in opened ports, just 22, 21 80 and maybe 8080. I want to stablish any kind of VPN between two routers. But using L2TP for example there is no way to coneect L2TP server on 1701 port!! What should I do to change destiny port in L2TP client?? dst-nat does ...

ivanperino

Dear Genius: I need to perform dude server on RB1000 but a problem has arisen. HDD space is not enough! I´ve installed a 4GB CompactFlash 4x into the external CompactFlash slots in RB1000 and it has been detected and formated by WebProxy but what I really need is to use that memory card with Dude Se...

ivanperino

Hello there. I wonder if there is a way to develope a script which be able to reboot an external device such a motorola PTP600. Here are the 3 comands i need to perform, I could not do it by scripting, I have heard I need some more tools to do it telnet 10.12.1.5 passwd reboot yes the first line car...

ivanperino

I have done 5 tests and believe me, configuration is OK. 3 tests have been performed on x86, RB600 and RB532 with ROS 3.10v with the same configuration and all of them worked properly. 2 tests have been performed on diferents RB1000 with ROS 3.3 and another with 3.10 with the same configuration and ...

ivanperino

Serious Problem: Entire network is being routed by a PC x86 platform AMD 1.2Ghz, 256MB and RouterOS 3.10. Due to untidy growing and upgrading, network is conformed by VLANs over ether2 interface but also, a plain network (no vlan) is placed over this interface (it is a sort of lan coupled to a trunk...

ivanperino

Hello Forum, I would like to know if there is any way to syncronize some APs like they were on Canopy Cluster Manager. Anybody knows Interference is critical among many APs in the same tower in the same channel, even on the same AP using more than one wireless card. May be GPS syncronization could b...

ivanperino

Thank you a lot Serjes, How could I be so blind! you are right, I am sorry If this was a stupid cuestion.
Thanks again.

ivan perino
I had mangled eth incoming packets but I had forgoten to take off IP Gateway from Route List.

ivanperino

Hello Profesionals. I have 3 PPPoE conection to internet (ADSL) and each of them have the same Gateway 200.51.241.221 but I would like to route trafic from eth1 to PPPoE1 and trafic coming from eth2 to PPPoE2. Which is the procedure to do it? I have RouterOS v3.0 - When I perform a route list, It as...

ivanperino

That's right man. Thank you a lot. I sould have guess it!.
I am working on 10MHz.

ivanperino

Dear forum: I haven't found on 3.0 version manual the meaning of Tx/Rx Rate on wireless interfaces. I can see this only on RouterOS to RouterOS links. In my case, it says 48Mbps/2/36Mbps/2 and I would like to know the interpretation of "/2". I realy appreciate any clue from you, thanks a l...

ivanperino

sorry, the action is ACEPT I have not shown the entire configuration but it has been working well since months. The point is that I want to match (on firewall) by IP address and MAC address too. I will tell you the problem. Clients change theirs IP just for watching what happend. and a lot of IP DUP...

ivanperino

Hello. I was trying to match IP address and MAC address in firewall but I have not been able to do it. I just set up the following Gaps. firewall / General / Chain forward firewall / General / Src Address 192.168.200.21 (it is an example) firewall / Advanced / MAC address 00:0E:41:52:A4:B8 but, when...

ivanperino

How you can change (move) a device from local map to any submap keeping its configuration, name, etc.
I havent found the way to do it!
YOu cant drag and drop devices inside a submap, It doesn´t move from local map.

Thank You a lot.
Ivan Perino

ivanperino

It was amazing!! You saved to me a lot of time!!! tank you.

ivanperino

I need to limit datarate to every user in a LAN. They are about 50 or 60 users The problem consist. If one host start downloading e-mail (for example) It takes the entire bandwidth up to finish. The router interface of this LAN has 512Kbps asigned on queue. Is there any way to do it without adding o...

ivanperino

NORMIS. There is a connection to 66.222.xx.xx (I dont remember exactly the IP) to port 80 when ARES start. I have captured packets and the first one always contains> GET /ares/home.php... and so on what about match packets with text "ares", I dont know how to use content= on mangle, I have...

ivanperino

Normis, It does not block ARES program.! have you tryed your self? Ares uses http services to download packets as well as P2P connections. You can see it on firewall/connections tag on RouterOS. It also uses UDP protocol, then you cant stop ares at all!! please, try it and tell me! may be I am doing...

ivanperino

Droping UDP src-port & dest-port=0 It does not work so well. I think Ares find anothers UDP ports and it acomplishes conection through them. However it gets lower download rates but It never cut traffic! seeing on firewal / connections you can see udp port opens about 56300 to 62000. May be some...

ivanperino

Nomis, First of all, thank you for your quickly response. RouterOS 2.9.44 I have already done what you said, but Ares still downloading as fast as he can! even after disconnect-reconnect ares; restarting computer; after whatever I do. Here you are Firewall lines I setted. (192.168.2.249 is the test ...

ivanperino

Hi Specialist. I have tryed blocking ares p2p packets and I have not accomplished it. I followed the instructions on this forum but I can get good results. If you see on ip/firewall/connectios you will see all the warez conections closed, however, my ares still downloading at very high speed! It see...

ivanperino

I have found some problems with Dude 2.2 and 3beta6. I dont know if it has to do with mistakes of mine of it is a dude problem. Dude 2.2 doesn´t work with private MIB. In fact, I have installed WiLan MIB on 2.2 but it definitelly doenst work. I cant perform a snmpwalk, however, all the mikrotik´s MI...

ivanperino

My inquire is about comunication through serial port on RB500. Is there any way to read and write over RS232 port on RB? I have seen SIGWATCH but it doesn´t give me a complete solution. It only watches an electrical signal on serial port. I would like to read data from that port, thus, perform some ...

ivanperino

GRACIAS HERMANOS!! GRACIAS!!

ivanperino

My little problem is that I dont understand the Upgrading process. I mean. I have some Router boards working with 2.9.38 and some with 2.9.29 versions. The License Window says to be upgradeable up to version 3.x - what does it mean? This UPGRADING is free for charge? I have to buy a new license to u...

ivanperino

I have done what you said. Now, when I start winbox, a license window appears asking for a key!

I dont have a key.
I had a RB532 with a level4 license version 2.9.29 then now I have a demo version of 2.9.44 on my RB532.

What must I do to get my RB532 back?
THANKs

ivanperino

I have purchased a RB532, RouterOS 2.9.29 and my license says: Soft ID: 7XXX-XX Upgradeable To: v3.x Level 4 What should I do to upgrade the RouterOS version? Need I to buy a new license? I have learned a lot about mikrotik managment but I have never upgraded a license! I need some advice. THANK YOU

ivanperino

Well man, we are having a serius problem with RIP. I am ussing version 2.9.38 I did it all as you told me. I enabled the routing-test packets but... It has more bugs than routing packet. It is true, It sends every 5 second even after reboot but, Cisco doesnt catch it, or may be, RouterOs is not real...

ivanperino

Thanks Andrew. I thought it could be a bug into RouterOS.

I am already using RIPv2 but I dont know what is Tiggered updates. I will take a glance about it.
Regarding Link status I am not sure wheter Cisco1600 support it.
I wanted to use something FUL compatible with any router.

ThankS a lot.!

ivanperino

Hi. I am using RIP between a CISCO1600 and a RB133c with OSv. 2.9.38 I use it with 5 seconds delay, I mean, Update_Timer = 5s. and 20s of time out, time_out=20s It seems going well but if I reboot the 133c then It starts to send RIP packets every 30 seconds! regarding, The Cisco1600 put down the rou...

ivanperino

Christian. I have found some interesting things. I have already checked the fresnel zone, interference, etc. It seems fine. But,,,, Changing Tx_power and DataRate parameters and watching CCQ values I found irregular behavior. - The most DataRate I force, the most CCQ I get. but, to get Higher datara...

ivanperino

Thanks Christian. I will do that. I´d like to ask you another little problem. I achieved a 70km link with two SR5 over nstreme protocol and its bandwith is more than 10Mbps, (I think it is excelent) but there is too much packet retransmision, the CCQ is about 48% there by there is a lot of packet re...

ivanperino

I found the problem. You cant bond wlan interface if it is in nstreme mode. All this works fine if I use 802.11 standard, the problem is I need nstreme because the distance.

If you know some solution to make this I will thank you.

Ivan Perino

ivanperino

Dennis, I wanted to thank you for your response, however I have tryed to do this bonding but it doesnt work. I suppose you have understood what I did. I dont need neither STP or OSPF. I want a flat NET, I mean, it´s suppose I am be able to bridge 2 interfaces where one of them is a bonding interface...

ivanperino

Hi mikrotik colleages. We need some help here! I have the next situation; Mikrotik 133c_placeA wlan1 = SR5 ubiquiti ether1 = OnBoard ether2 = OnBoard ether3 = OnBoard Mikrotik 133c_placeB wlan1 = SR5 ubiquiti ether1 = OnBoard ether2 = OnBoard ether3 = OnBoard I have got 2 RADlink-RADIOS Bridges betw...

ivanperino

Hello. I am working with Cisco 1600 and Mikrotik RouterOS at the same time. I need to configure the Mikrotik ethernet interface as "no ip redirect" it means the interface does not send ICMP messages to the network conected. These ICMP messages change hosts gateway on the network by redirec...

Search found 70 matches