MikroTik

silvyana

Set DHCP client on the bridge (it is RED now because it is not correct!) or just disable it or remove it. You can work without DHCP client if your DNS, NTP and IP route is set correctly. . You can work without DHCP client if your ¿¿¿ DNS, NTP and IP route is set correctly ???. It must not be correc...

silvyana

You can work without DHCP client if your DNS, NTP and IP route is set correctly.

The catches are not good ..?

silvyana

Buenas noches We continue with the first part. Correct? yes, no ..: https://live.staticflickr.com/65535/51794997246_1fcfb2076f_b.jpg ba by P. Ramiro , en Flickr https://live.staticflickr.com/65535/51794997256_2404c8bc87_b.jpg bb by P. Ramiro , en Flickr https://live.staticflickr.com/65535/5179536611...

silvyana

“OK forgot about the default DHCP client on ether1. It is still there. ..." Thanks a lot. It costs me a lot to execute his words, but little by little I sure succeed. Part by part: This is good...??? Active ether1 WAN-01 ??? in DHCP Client? https://live.staticflickr.com/65535/51794736121_c6da9...

silvyana

It stopped working
Open in:
viewtopic.php?t=181844
Dejo de funcionar
Abierto en:
viewtopic.php?t=181844

Gracias.

silvyana

THIS stopped working for me. ESTO Me dejó de funcionar. https://forum.mikrotik.com/viewtopic.php?f=13&t=171149. . After several hours several days, I have succeeded. Después de varias horas varios días, lo he conseguido. . I publish for two reasons: 1.- In case an expert can validate it and 2.- ...

silvyana

Goodnight. Thanks a lot anav. I want to configure as explained to me from “0". I want to be calm there are no old "remains" I take note and study your advice. Always grateful. Cheers. Peter. Buenas Noches. Muchas gracias anav. Quiero configurar como me ha explicado desde “0". Qui...

silvyana

Reset configuration
Did I not select any box?
Thank you.

¿No selecciono ninguna casilla?
Gracias.

silvyana

Good Morning. Thank you first for your responses. It is not the case, it is not committed, but if it were not very complicated and can explain it, if it was complex, we will learn over time. Always grateful. Cheers Peter Buenos días. Primero agradecer sus respuestas. No es el caso, no esta compremet...

silvyana

Goodnight
Thanks, what option?

Cheers
Peter

silvyana

Goodnight What is the best method to clear the Router and start configuring from "0" Well that, on the web you read many different ways, what is the best procedure ?, Thank you. Cheers Peter Buenas Noches Cual es el mejor metodo para dejar limpio el Router y Empezar a configurar de "0...

silvyana

Goodnight. bpwl, I have configured my METAL 52 Router, same as hAP and it has improved a lot. Red with WAN ("Quick Set”). Blue as bpwl taught me, in the post. Thank you. Cheers Peter Buenas noches. bpwl, he configurado mi Router METAL 52, igual que el hAP y ha mejorado muchísimo. Rojo con WAN (...

silvyana

I think everything is already "rolling". https://forum.mikrotik.com/viewtopic.php?f=13&t=171149&p=837133#p837108 It has been a luxury to have a travel companion who has been clearing the way at all times. Very happy and eager, thanks to your help, as I said in the previous post, to...

silvyana

Metal 52 is going as a spare part to the Caravan. Now that everything is going great: I am going to put another hAP in the Basement, since the "home automation" needs 2.4GHz and ALEXA and Tablet work much better with 5GHz. METAL 52 does not support both Wi-Fi's simultaneously. Thank you. A...

silvyana

Good afternoon I think I have got. Thank you for your kind lessons. Couldn't set parameter ";;; defconf" for wlan 2. I have copied (Copy), wlan 1 and changed wlan1 to wlan 2. Cheers Peter Buenas Tardes Creo que lo he conseguido. Gracias a usted por sus amables leciones No podia configurar ...

silvyana

Good afternoon
Horror .. !!!, I have run out of 5GHz wifi, it is probably wlan 2, I will try to solve.

Buenas Tardes
Horror..!!!, me he quedado sin wifi 5GHz, seguramente sea la wlan 2, intentare resolver.

silvyana

Good afternoon Thank you very much for your patience and interest. Impressive your lessons. Test passed. Perfect connection from the "Living room" from the Aplle Router. Thanks a lot. Thank you so much. Infinite thanks. Buenas Tardes Muchas gracias por su paciencia e interes. Impresionante...

silvyana

Good afternoon Thank you very much for your patience. I have come home. Many (-) and many changes to get to this. It's okay...? Step to try ...? I am missing the "I" Thanks a lot. Buenas Tardes Muchas gracias por su paciencia. He vuelto a casa. Muchos (-) y muchos cambios para llegar a est...

silvyana

I do not understand, METAL 52 is like this, (at the moment we are not going to touch it, until we finish with hAP) and from METAL 52 is where you tell me to "Telnet". Then I configure hAP and then never open "Quick Set”. No entiendo, METAL 52 esta como esta, (de momento no lo vamos a ...

silvyana

I do not understand, we are always entering through the WAN.

No entiendo, siempre estamos entrando por la WAN.

silvyana

There is no need for a VPN. Add ether1 as bridge port, and it will be a LAN just as ether2-ether3-ether4-ether5. Select menu "Bridge" Select tab page "Ports" push bleu + select "ether1" as interface push OK all done This way the hAP is just a "switch" between...

silvyana

Good morning. Thanks for comment. Yes ..., I handle all the equipment, Air Conditioners, Cameras, Blinds, I even like to look at my Mikrotik from outside my house, for example, now that I'm not at home, I can see and act on all my Routers and Switch. METAL 52 included, but I don't have access to hAP...

silvyana

Good morning FORUM, good morning bpwl. I have to separate LAN1 as WAN to LAN as soon as possible. I just saw that from the Internet with the VPN, there is no way to connect to the hAP router because I could not configure it as bpwl told me. I'm not going to rest for two days and I kept doing this. C...

silvyana

OK. I also learn. "WISP AP" for Mikrotik is just a better "Home AP" setting. Not a wireless connection to Internet (mikrotik calls this CPE). I had it wrong. But you did not need to use the Quick Set. Just start from the default configuration, add all interfaces to the bridge, s...

silvyana

THANK YOU SO MUCH bpwl

MUCHAS GRACIAS bpwl

silvyana

Thanks a lot. I study everything, I practice it, I integrate it and I tell you. I already enter Winbox with the mac: For MacBook check the firewall settings of the MacBook. You might need to allow broadcast / multicast. This is what was happening. No web, no Winbox; “Home AP Dual” con “Quit Set” RES...

silvyana

Explain what the connection with BinBox is.(Is that another SSID you want to connect to ?) I do not understand. Google translate does not make it understandable. . For MacBook check the firewall settings of the MacBook. You might need to allow broadcast/multicast. Very important, I will try to look...

silvyana

I have seen WISP AP on your Metal ... but I don't understand your setup, as I also see cables to the Metal and to the hAP ac in your schema. (cable #4 from to router to the hAP, cable #2 from the router over switch 3 to the Metal) Why do you need the wireless link for ? WISP is wireless-ISP , is fo...

silvyana

Wi-Fi and LAN speed tests. Very happy. It remains to finalize the detail of being able to connect by mouth wan to Binbox and wait for MikrotiK to solve the compatibility with WINBOX. Pruebas de velocidad wifi y LAN. Muy contento. Falta ultimar el detalle de poder conectarme por la boca wan a Binbox ...

silvyana

This is better..?

Esto esta mejor..?

silvyana

Good afternoon. Please excuse my pesaded. For my house scheme: Better "WISP AP"? "In WIS AP": How do I recover the mouth of the WAN ?, I have 4 computers to connect, Thanks a lot. Cheers Peter Buenas tardes. Ruego disculpen mi pesaded. Para el esquema de mi casa: ¿Mejor "WIS...

silvyana

Add all ports to the bridge (ether1,ether2,ether3,ether4,ether5,wlan1,wlan2) / ( in default config only ether1 is missing) Add an "IP Address" to the bridge : 192.168.1.2/24 Add an "IP route" 0.0.0.0/0 to 192.168.1.1 Add DNS to 192.168.1.1 Configure the WLAN interfaces as "...

silvyana

Good afternoon.
As I assumed in previous post it is a mac problem with Winbox.

Cheers
Peter

Buenas tardes.
Como supuse en post anterior es un problema de mac con Winbox.

Saludos
Pedro

silvyana

Sorry for the trouble. But this is a damned simple config that is needed here. Good morning. No ..., No ..., No ..., You don't bother, you help. The one who bothers me. Always grateful. This afternoon I start with this and post the results. Thanks a lot. Cheers Peter Buenos dias. No..., No..., No.....

silvyana

The Neighbors and MAC access does not travel over the Router in the Garaje. From there at the hAP you cannot see the Metal 52 in (broadcast) discover mode. . No, I enter either IP or MAC in the "Manager” tab I think "neighbors" does not work well with macBook . . No, entro bien con I...

silvyana

Tomorrow 4th Reset, if it doesn't work, return equipment.
Thank you very very much.
.
.
Mañana 4º Reset, si no funcionara, devolver equipo.
Muchas, muchas gracias.

silvyana

If my mac in Wifi and LAN, FIXED IP, all well managed.
.
Si mi mac en Wifi y LAN, IP FIJA, todas bien gestionadas.

silvyana

Did you get that MAC address from the "Neighbors" tab ?
Nothing comes out of anything, it is blank, it does not even see METAL 52

silvyana

Did you get that MAC address from the "Neighbors" tab ?
Because I see (parts of) the MAC address of ether1. That cannot be used !!!
No, I have them written down.
In the images that I have put of hAP, before saving configuration, with my network segment, you can see.

silvyana

No DHCP, only for guests.
My teams, all, home automation, TV's, SONOS's, Multimedia, Cameras etc, etc ... They have a FIXED IP.

silvyana

In case it would help:
.
I want to state that everything worked very well.
.
Wifi and LAN, BUT ... I do not enter with Winbox

silvyana

It has not worked.

silvyana

Make sure nothing is connected to the ether1 interface of the hAP!
Winbox en mac

silvyana

1º I change wiring according to red paint and connect mac to the LAN to test.
.
2º You can only use ether1 if you connect ether1 to the bridge port. (Then it is also a LAN connection).
Bridge -> Port --> +(add) ether1

I have understood well.

silvyana

To enter through Winbox I connect to the hAP LAN

(Or you must have done something else than just the Quick set.)
Absolutely not

silvyana

Mi esquema
Gracias

silvyana

Thanks a lot. Your first screen shot shows the metal 52ac Quick Set mode set to WispAP. I would expect this to be set to CPE when used in a caravan. METAL 52 is also in my house it works very well, in the caravan I have an LG antenna to capture wifi and a hAP router for multimedia, tv, ipad and tele...

silvyana

Thanks a lot. "And now I see your config: indeed your internet connection and LAN connection have the same subnet. This setup is not valid ! Even invalid without NAT. When a routed (and firewall) setup is used then: 1. The "Local network" must be a different subnet 2. 192.168.1.9 cann...

silvyana

You need to see the MAC address in neighbors. You don't know what the MAC address on the bridge will be (normally first operational interface, so it could be ether2 also), unless you have set the Administrator address on the bridge what is not possible in Quick set. The MAC address for the internet...

silvyana

Mi configuración.

Gracias.

silvyana

192.168.1.69 = METAL 52 de Mikrotik 100% funcionando.
192.168.1.2 hAP de Mikrotik 95% funcionando, NO CONECTA CON Winbox.

Gracias

silvyana

GOOGLE TRANSLATION First very grateful for your help . "If you are connected, can you see the router in the "Neighbors" tab of WinBox ? Double click on the MAC address to connect.". Nothing appears in the "neighbors" tab, it is empty, but I know the router's "MAC ...

silvyana

GOOGLE TRANSLATION Thank you very much for your prompt reply. . I have tried: - With the new IP of the router. - With the mac of the router - With 2.4 GHz wifi - With 2.4 GHz wifi mac - With 5 GHz wifi - With 5 GHz wifi mac . Never through the mouth of the WAN, connecting the mac to the LAN, I don'...

silvyana

SORRY I CAN ONLY USE GOOGLE TRANSLATOR: Good evening, it's my 4th Mikrotik team and I'm already desperate. . It turns out that both with Winbox and with the Web, I access the new hAP for its simple configuration in "Home AP Dual" mode with "Quit Set", but I access it from its fa...

silvyana

Same question "P", "DP" and I add:
Ceee
eeCe
What does the position of C mean?
Thank you.

Search found 55 matches