Upgraded a CRS354-48P-4S+2Q+RM MLAG paired stack. After this weekend customer reported extreme slow network speed. Made a return to 7.2.3 and now everything works again. What about 7.4.1 ? I had the same behavior with 7.4.1, extreme low speed over the LAN, in RB3011, and hEX POE, causing to roll ba...

I have the same, trying with different SFP 1G modules (Mikrotik, Tplink, Ubiquiti) and all of them when the fiber is longer than 5meters fails the negotiation and many link downs at RB5009 side. With a fiber of 50Meters, one side there is hEX POE RB7.1.5 with S-31DLC20D (auto-negotiation=no speed=1G...

We have some hEX S v6.48.3 in different locations to have home local LAN and VPN (L2TP to 3 locations connectivity) but one of them has a interest behavior in the CPU usage, in the graphic historic is like a Sawtooth (attached image). Every +-8 hours increase to +-25% and return to +-7%. I have rese...

We faced similar issue with running out of available IPs from the pool by mac-address 00:00:00:00:00:00 and also "IP declines" "conflict" by many iphones, but not Laptops from different brands (weird). In the local router we have a bridge that is set to proxy-arp because we have ...

I just faced the same issue. The problem as you mentioned was related to EOIP tunnel MTU (1408), but in my case I fixed it only setting the value to 1500 in the Bridge at MTU field, before was empty and as mentioned, takes the lowest MTU of the LAN "Actual MTU 1408"(was the EOIP interface ...

I have updated the following boards to 6.41 RB750GR3, RB960PGS, RB3011 and CRS112-8G. All of them were successfully provisioned to this new version with no issues. Specially for the CRS112 I noticed a huge improvement in the throughput speed as a simple switch (no IP.Firewall), with 6.40.5 I usually...