Without seeing your config, it's difficult to say for sure, but I suspect you just need to add a route

Code: Select all

/ip route
add distance=1 gateway=192.168.0.1

That fixed it.

After that I only needed to set DNS in: /ip dns, and now I can check for RouterOS updates.

Thanks!

I have my HAP AC connected via one of the LAN ports to my LAN/modem. The HAP AC has a fixed IP inside my LAN. My modem is now the DHCP server on my LAN. All wifi clients connect to the net/LAN without any problem in this setup. But I can't check for new updates of the HAP AP like this :( The HAP AP ...

In the bridge set protocol mode to none

Thank you!

After reset went to Stable. Still seeing STP traffic.

So anybody know how to disable this STP traffic?

Great.

I just disabled BRIDGE and all connections from and to the HAP AC are not possible any more.

Reset time.

/system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 routeros-mipsbe 6.41.2 1 system 6.41.2 2 X ipv6 6.41.2 ipv6 was disabled. I am trying to learn here. This isn't ipv6 (which I thought it was) traffic but bridged ipv4/ethernet STP traffic if I look closer. Just wondering how I ca...

Hi all, I am running the HAP AC RB962UIGS-5HACT2HNT with 6.41.2 as an router with AP function. I see on my clients with tcpdump allot of: 20:37:05.200632 STP 802.1w, Rapid STP, Flags [Learn, Forward], bridge-id 8000.64:**:54:**:20:**.8004, length 43 message-age 0.00s, max-age 20.00s, hello-time 2.00...

Thank you

Hi all, I just bought a RouterBOARD 962UiGS-5HacT2HnT, after good results with the Lite version but that was only 100mbit. I upgrade to Current and with that I upgraded the firmware to 6.41. With Current I was running into problems. Some clients could not connect and the speeds where awkward slow on...