Im also very surprised that the newly announced MT ACs are 2 chain and not 3 chain (esp. at this point in the AC life cycle), I love MT and will never use anything else bc of its power/flex at routing, 2 chain makes sense, because nearly all of the consumer devices have only 1 or 2 chains. Also new...

Update again: Deactivating Nstreme Polling doesn't solve the problem, the improvement was sheer coincidence. After changing the value, Wifi reboots and change channel. Therefore I need to do further Investigation, but within our office is low wifi interference and changing channel to even more free ...

Hello uldis, I did retest with and without Nstreme polling activated on wAP. Without polling I've got 96 MBit/s throughput average. 2,4 GHz @ HT20 With polling I've got 61 MBit/s throughput average. 2,4 GHz @ HT20 Regarding mAP I did tests on 2 devices and the low throughput was on both. My test Lap...

Short Feedback.

Deactivating Nstreme Polling helps a lot for wAP.
Throughput was at about 100 Mbit/s 2,4GHz@ HT20
Throughput was about 400 MBit/s 5GHz@HT80

For mAP it doesn't help much, throughput still about 30 MBit/s 2,4 GHz @ HT20

Hello everyone, I have an update to this issu. I made some measurements and screenshots and it seems that mAP only uses 1 antenna (chain) for TX transmit and therefore can never achieve good throughput. Also it seems that is not an issue solely of mAP, also wAP only use one Antenna (chain) on TX to ...

Hi, this is my first post and it seems I found either a problem with the device or have some misconfiguration. But first, I have bought mAP lite devices and I really like how small they are. The problem is, that it seems the wifi module can't utilize the power of 2 chains. If I connect to maP lite v...