This is normally caused by clueless operators on the path towards the website that have blocked ICMP, combined with your provider using PPPoE and no RFC4638. (so you cannot set MTU 1500 on your PPPoE interface) You can work around this problem by adding this to your configuration: /ip firewall mang...

Not enough info, i.e. no route / nat info. On a side note, it is per connection based, so you will only see 2nd WAN used with 2nd connection sorry Here's the route and nat # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 122.54.44.225 1 1 A S 0.0.0.0/0 103.236.166.33 1 2 A S 0.0.0.0/0 122.54...

Hello, im new here at mikrotik and i need to work with pcc load balancing and i don't know what i'm doing wrong with my configuration, can someon give me the reason why my PCC load balance not working here's my mangle rules: 0 chain=prerouting action=accept dst-address=122.54.44.224/30 in-interface=...

Hello,

I just have an idea if I can have a PPPoE server with two IP Pool with the other pool will go to Hotspot page to login to have a access to the internet, while the other pool will have access to the internet without going through hotspot.

Is it possible?

Sorry for my bad English.

Anyone who can help me with this?

Thank you in advance

Hello,

I just have an idea if I can have a PPPoE server with two IP Pool with the other pool will go to Hotspot page to login to have a access to the internet, while the other pool will have access to the internet without going through hotspot.

Is it possible?

Sorry for my bad English.

Hello,

I just have an idea if I can have a PPPoE server with two IP Pool with the other pool will go to Hotspot page to login to have a access to the internet, while the other pool will have access to the internet without going through hotspot.

Is it possible?

Sorry for my bad English.

AFAIK rate limiting has nothing to do with how client configures its IP address. If client statically configures its address to "correct" subnet, then it'll get same rate limitation. If statically configured address is in "wrong" subnet, then rate limitation will be according to...

Sorry for this, I have ether1 as WAN with ip add 122.5.x.x/32 20m/20m and ether 2 as LAN with ip add 172.16.0.0/16 with 172.16.0.0/22 is with 2m/2m rate limit and 172.16.0.4/22 is with 5m/5m rate limit I configure DHCP server to add statically leases so I can put rate limit in the leases with their ...

Hi,

Im trying to configure DHCP in my CCR with

Hello, Im trying to configure CCR as DHCP server w/ ether 1 as WAN w/ ip add 122.4.x.x/32 ether 2 as Lan w/ ip add 172.16.0.1/16 I set DHCP server w/ address pool of static only to add manually the MAC in the Leases and add rate of 1M/1M I have a problem in if the PC that is not in the Leases try to...