MikroTik

walterav1984

The RB751U-2HnD (discontinued) won't boot this 7.1b5 version in anyway. It would not surprise me at all when at some point in the v7 release process the support for some old devices with little memory and maybe uncommon chip will have to be dropped... This is an unusual device in that it has only 3...

walterav1984

The RB751U-2HnD (discontinued) won't boot this 7.1b5 version in anyway. No matter if upgraded via packages web-update, nor via files upload followed by a reboot nor via winbox and finnally not even via netinstall. The leds of the connected interfaces won't come up after upgrade&reboot and device...

walterav1984

Just saw these downloads updated for 2.13 netPower Lite 7R (CSS610-1Gi-7R-2S+), CSS610-8G-2S+ and GPEN21 any changelogs or updates for other models with (normal) SwOS 2.13?

To early I guess its now posted:
viewtopic.php?f=21&t=173526

walterav1984

...I'm not sure you will find that support on other network equipment vendors. It's quite a nische feature. especially when Mikrotik does many proper LTE routers to begin with. Sofar indeed the only vendor that can do this ootb is "Netgate" while running pfsense, after that you probably g...

walterav1984

Most of the Mikrotik devices come with a huge amount of free disk space Quite many recent Mikrotik devices (e.g. hAP ac2, hAP ac3, wAP ac, cAP ac, etc., not to mention low-end devices) have really tiny disk space with size of 16MB ... Thanks for your interest. However I do think our perspective of ...

walterav1984

For a while now USB tethering using Android phones is a supported feature of Mikrotik RouterOS, but iPhone users are still left out using USB (only wifi tether). Wifi tether behaves different since IOS 14 private SSID/MAC changing features... Tethering via the USB on iPhone can be done officially fo...

walterav1984

SOLVED:
v6.47.3[stable] fixed the POE powercycle issue for me, although the changelong mentions a different typo model!
* poe - fixed "power-cycle" functionality on RB960GSP

walterav1984

SOLVED:
v6.47.3[stable] fixed the POE powercycle issue for me!

walterav1984

Possible fix see changelog v6.47.3[stable] or model typo?

* poe - fixed "power-cycle" functionality on RB960GSP;

walterav1984

Is this a new model "RB960GSP" ?

Or has the POE powercycle bug for the "RB960PGS" / hEX PoE has been fixed after more than 2 years?

walterav1984

Still 1 hour after upgrade from 2.11 to 2.12 there are pause frames between 10GB SFP mkt DAC from CSS326-24G-2S+(RX pauses) to CRS328-24P-4S+(TX pauses), however its only one direction instead of both direction without 1 direction doubling as in the past...

walterav1984

The RB260GSP is a passive poe device not 802.3 af/at compatible and will not generate 48v from a 11-30 volt input. Therefor we had the replace it with RB960GSP (Hex POE) which needs a seperate 48/57V powersupply to passthrough the af/at compatible voltages since it also cannot generate 48V/57V from ...

walterav1984

This "hang" as in today became a real issue for us, it was not passing any traffic anymore except ping commands also the webinterface was not available. In the past sometimes the webinterface didn't come available, but the rest of the switch still kept working and passing traffic fine but ...

walterav1984

!!!Pause frame FIX/Workaround!!! It's a bad workaround but maybe its insightful. After disabling "Auto Negotiation" on both of the SFP+ ports for the CCS326 and CSR328 and force the 10Gb Mikrotik 3M DAC to 1Gb (with "Flow Control" still on) the Rx Pauses and Tx Pauses have not r...

walterav1984

!!!Pause frame FIX/Workaround!!! It's a bad workaround but maybe its insightful. After disabling "Auto Negotiation" on both of the SFP+ ports for the CCS326 and CSR328 and force the 10Gb Mikrotik 3M DAC to 1Gb (with "Flow Control" still on) the Rx Pauses and Tx Pauses have not re...

walterav1984

One of the last standing issues is still having pause frames between CRS328-24P-4S+ and CCS326-24G-2S+ with 3M mikrotik 10GB SFP+ DAC on the trunk SFP+ ports. The network has 2! physical DHCP servers, one DHCP serving the untaged LAN and 2 tagged vlans from trusted port 24 on the CRS328 the other is...

walterav1984

We using FS.COM SFP+ modules (single-mode, single-mode BiDi and multi-mode), without any problem at all, on many CRS317, 326, 328, RB4011, CCR1009,

Are you running them succesful as in no TX/RX pauses with "Flow Control" enabled or disabled?

walterav1984

The reset information from the Mikrotik wiki Manual:Reset should be linked as a direct topic in the RouterOS Wiki Manual:TOC General>Basic section. It should not be something hidden in a subsection.

Without a proper reset procedure you might not even get to the basics if you lock yourself out.

walterav1984

@k6ccc
A personal RB260GSP "CCS106-1G-4P-1S" (firmware 2.7 Fri Dec 15 2017 09:42:48 GMT+0100 CEST) upgraded fine from its webinterface advertised 2.10 version, without any intermediate, older and or P versions.

walterav1984

No, indeed haven't disabled flow control I'm already glad I don't see any errors anymore. Haven't had any real issues either since there is almost no traffic on these switches some voip/webbrowsing. The first thing I'm will to try is change the original 3m mikrotik DAC 10GB cable with another one ev...

walterav1984

I can confirm @ploquets behaviour about CCS326-24G-2S+RM having RX pauses with Flow control enabled on the SFP1 with 10GB 3M DAC cable to CRS328-24P-4S SFP1. Both running SWOS 2.10, the RX pauses on the CCS326 are the exact double amount of the TX pauses on the CRS328.

walterav1984

@k6ccc A fellow Mikrotik user confirmed to me that this SWOS upgrade loop behavior also happens on some of his cheaper line of switches like the new RB260GS(P), not the older ones which are SWOS 1.xx only! He even noticed the details of the firmware that was replaced with a slightly newer (different...

walterav1984

Running the SWOS 2.10 firmware upgrade on a internet connected CRS328-24P-4S+RM (SWOS 2.7 Fri Dec 15 2017 09:44:02) as advertised via its own webinterface leads to a newer 2.7p release but not the promised 2.10 release! The "p" version of 2.7p is build at 09:44:16 instead of 09:44:02, howe...

walterav1984

there was one other post that mentioned having issues with SFP4, but only on one switch. Correct thats a topic I started, https://forum.mikrotik.com/viewtopic.php?f=17&t=134057 and I only have one CRS328-24P-4S+RM switch. Could you please try to reboot in RouterOS and see if you can forward / c...

walterav1984

According to Mikrotik support its because of the missing temperature based fan control but planned for future SwOS version. @Janis.B May 23, 2018 8:18 AM > We are looking forward to implement PoE voltage option and temperature based fan > control on CRS328-24P-4S+RM switch in future SwOS versions.

walterav1984

According the Mikrotik support, its not a bug nor unplanned/unreleased model but intended naming scheme. @Janis.B May 23, 2018 8:18 AM > The "CSS" model naming in SwOS authentication window is intentional and does not > differ between "CSS" and "CRS" models. Currently, ...

walterav1984

Mikrotik support mentions that they intent to support it in future, so potential buyers be aware of missing passive/force POE voltage selection and watch the next SwOS/RouterOS change log! @Janis.B May 23, 2018 8:18 AM > We are looking forward to implement PoE voltage option and temperature based fa...

walterav1984

@docmarius You might be right about the 48 passive(forced on) for the newer Edgeswitch models. The Tough Switch Carrier I got lost month needed to force the 48 passive POE for a 100Mbit 48V > 5V 802.3af adapter since auto wouldn't power up the POE port, than it started working. However the 8 and 16 ...

walterav1984

How can I set a certain POE port voltage on the CRS328-24P-4S+RM in the web interface to forced on with "a specific voltage" in this case 48V for a old Cisco phone, because "auto power" doesn't work and "forced on" feeds 24V instead of the needed 48V. I'm aware this Cis...

walterav1984

This is the wrong modelname "CCS328-24P-4S+" that the webinterface login greeter shows for the CRS328-24P-4S+RM (notice the mssing C>R and +RM)when running in SwOS 2.7 instead of routerOS.

walterav1984

@lovehz
Thanks for the safemode tip, to powercycle a port back to on if set manually to off(workaround) when session disconnects unexpected.

@all
I do have to say that USB-power reset is working for me even the default 1s, just tested on a RPI zero.

System>Routerboard>USB Power Reset

walterav1984

When linking/connecting the CRS328-24P-4S+RM and the CCS326-24G-2S+RM(both SwOS 2.7) together with a single SFP+ Direct Attach Cable "S+DA0003" (tried swapping each cable end) the only combination not working is CRS328-24P-4S+RM "SFP4" with 326-24G-2S+RM "SFP1/SFP2". Ev...

walterav1984

Some early testing of the CRS328-24P-4S+RM shows that rebooting/running SWOS (2.7) instead of RouterOS instantly wakes and continuously runs the FAN even without load(POE/normal devices). I have tried multiple (re)boots from / to RouterOS/SWOS ?

Is this expected operation?

walterav1984

From early/short testing I can say this device is silent/no fan noise at all with 2 Poe devices (24V & 48V) when running RouterOS, however rebooting the device in SWOS 2.7 it instantly wakes and continuously runs the FAN (even without POE load).

walterav1984

Still interested in a native linux version, if a correct "snap" packages has been crafted it means allot of other non debian/ubuntu distros with snap support will also be compatible(not mentioning cpu architecture differences)! Flatpack is also an option for linux distros? Has anyone tried...

walterav1984

@jo2jo since you wrote a "cli" ping based script to power down I guess the ""Power Cycle Ping Enabled" from the winbox "gui" also didn't work for you besides the powercycle button?

Same question asked here:
viewtopic.php?t=131971

walterav1984

Besides the Power Cycle button I'm afraid the "Power Cycle Ping Enabled" is also broken on this model, could @eichpa91 or @jo2jo confirm this?

walterav1984

I'm also having this issue were the webinterface per etherport powercycle button is not responding on "hEX POE / RB960PGS" using both 6.41.4 (Current) and 6.42rc56 (Release candidate) tested in router/switch mode with 24/48v PoE in or DC plug with passive and 802.3af PoE equipment. Only wo...

walterav1984

Does this mean there is another forum connected to the mikrotik.com account since it mentions forum username in the account page?

walterav1984

Also having the same problem on "hEX PoE RB960PGS" with 6.41.4 (Current) and 6.42rc56 where powercycle button does nothing, but as a workaround manually going back and forward form "auto/force on" to "power off" and back fixes it. Tried both 24V/48V via PoE in and DC pl...

walterav1984

Confusing and annoying for beginner, Had to register twice when first going to this link https://mikrotik.com/client/ even mentioning in the account page you can address a "forum username" which I did but than it won't login on the mikrotik forum using username nor emailaddress. The second...

Search found 41 matches