The issue is simple the snmp list is missing some entries. On "SXT SA5 ac" v6.49.6

All connected devices have the same version. Reboot doesn't fix anything. The same devices are always missing. This is true for other SNMP entries like radio name and signal.

The reported speed link in terminal(10Mbps) does not match the graphical UI(100Mbps). This happens on a RB Groove 52HPn v6.48 and a LHG 5 v6.46.3
The correct speed reported by the other device is 100Mbps. The link has no problems otherwise.

I have many faulty groove's. But I found a way to fix 40% of the devices. When 2 lights are on all the time or the first four are on and the other two are kind of blinking. The solution is to remove the heat-sink. As funny as it sounds the heat-sink causes those problems. Of course you need the heat...

I never knew that you have to tell the routerboard to upgrade the firmware manually. I always though that it was done automatically after you add the newest version. It became quite obvious with "/system routerboard print" when it tell me that I was using way to old firmware even older tha...

They are hardware failure mainly in the in the switch or the magnetic's. I have a few devices with the same problems, one or two have the lights on all the time and if I use another port it will behave incorrectly, Usually removing the magnetic's will disable the port but let the other ports work. T...

I have two devices with the same problem, a RB951G and a RB2011. They work but they don't boot. Let me explain the problem. If I power the device all led's come on then off and nothing happens, no beep, no nothing except for the led of the Ethernet port that I'm connected to, that one is solid on. T...

Hi, I'm using FTP to upload a "name.auto.rsc" file to a RB450G v6.41.3 device. The file is uploaded correctly and it's supposed to run automatically, instead I got an error saying "cannot open import file, file does not exist" in a file named "me.auto.log". I have tried...