Nobody had the problem to use pcq for sharing download bandwidth, having pppoe access concentrator in the Local interface? It is a problem of the mangle chain to be used when marking packets? Following the exact steps in the reference manual it seems not to work with such a configuration (PPPoE serv...

Hi, I tried something similar, following the pcq examples in the MT reference manual and wiki. I tried something like the following Mangle rules for packet mark based on dst-address-list (for download): /ip firewall mangle add chain=prerouting dst-address-list=my_addr_list action=mark-connection new...

Hi, I have a question about different queues integration in Mikrotik. I have simple queues dinamically created for each pppoe user, which control the traffic according to the pppoe profile to which a given user is provisioned. For each profile I also have download and upload queue trees. The questio...

Hello Smops, I'm trying to do something similar, I still have some troubles but... 1) be sure all the passtrough are set in the correct way: according to my knowledge and tests, you have to set it to yes when you want to continue in the mangle matches search: for example, after a connection mark, yo...

Ok, many thanks for the suggestion rgpmikrotik.
I'm going to read more carefully this documentation page! If you have a working example and want to post it, it would be very appreciated.
Anyway I'll post my solution, if I'll be able to make it working!

Thanks
--gio

... so, I must think there could be problems due to the dynamic pppoe queues created in the Local interface for each connected pppoe user?
The dinamically created queues and the custom ones cannot coexist?

--gio

Hello guys, I want to control download and upload traffic for pppoe users connected with Mikrotik as pppoe-concentrator, by limiting the bandwidth based on group of users (users profiles), and at the same time equalize the bandwidth usage among users with the same profile. As an example, having some...

Hi all, I have a Mikrotik RouterOS software (v2.9.42) installed on a PC equipped with an Asus P5PE-VM motherboard. Everithing is ok, it is working very well. However, trying to upgrade the software from the 2.9.42 to the 2.9.43 version, after the upgrade process was completed and the kernel successf...