where on router?

Hi,

have problem with mikrotik as ADSL gateway
some web pages won't open on workstation, android phones won't update.... until set MTU in devices to 1492
with other routers (thomson, Alliedtelesis...) works OK without changing MTU
any sugestions?

great :D yes, I need to add some other LAN networks with differents ranges: 10.113.64.0/24, 10.114.64.0/24 and 167.10.0.0/16 to address list. how to??? TX m. [admin@MikroTik] /ip firewall mangle> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting action=mark-routing new-routing-m...

what to do now? with enabled route with Routing mark I can use another gateway (192.168.1.59) and main 192.168.1.0/24 subnet but can't get to other static and dinamic routes and with disabled route with Routing mark I can get static and dynamic route and default gateway 192.168.1.37 (but I need gate...

I like to make that host manuel (192.168.101.48) use routing table, and if no destination then use gateway 192.168.1.59 instead 192.168.1.37 [admin@MikroTik] /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U ...

no, it is not OK
after adding IP firewall mangle and ip route, router don't use routing table for added source to other interfaces on different subnets and added static routes to other routers

Thank You tws101
it works

I understand what You mean, but need help how to... there is too many fields



Uploaded with ImageShack.us



tx

is it possibile to add route in mikrotik router1 for one host? scenario: PC's IP over dhcp 192.168.1.100-254/24 GW 192.168.1.1 Mikrotik router1 have 3 intreface IP 192.168.1.1/24 192.168.10.1/24 192.168.100.1/24 route list AS 0.0.0.0/0 GW 192.168.1.37 DAC 192.168.10.0/24 DAC 192.168.100.0/24 router2...

resolved,

details in PM

The subnets are in 3 Vlans with routing, and DHCP relay on
for some reason I must have only 1 DHC server with 3 poll address space

Hi, scenario: one L3 switch (AlliedTelesis) with 3 subnets: 192.168.1.0/24, 192.168.2.0/24 and 192.168.3.0/24 (DHCP relay is on ) Mikrotik DHCP server 192.168.1.2 attached to subnet 192.168.1.0/24 h ow to configure DHCP to gives IP addresses to all subnets with IP in range pool1 192.168.1.100-192.16...

THX

setup firewall filter rules in forward chain to accept RDP and last rule to block everything else.

please help with sintax, I am not to friendly with command line

add chain=forward action=forward protocol=tcp port=3389
?????

how to block all traffic and allow only RDP protocol to pass trough the router?
THX

mikrotik with ether1 and ppp-out1 interface (LAN card 100TX and USB OPTION connected to internet) but there is no routing between those 2 interface??? (from ppp interface I can ping public ip, but no from private interface) Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2M...

I can't see my PCMCIA card
(OPTION qualcomm 3g CDMA card model GT Fusion+ EMEA)
in /system/port to make GPRS connection
The card is in richos R5C485 PCI>PCMCIA adapter and it is reported in driver as Quicknet JACK
Please help
M.