MikroTik

trottolino1970

You cannot install the dude on it

Inviato dal mio SM-G361F utilizzando Tapatalk

trottolino1970

Could not add VirtualAP via winbox on my RB751G-2HnD, "L2 MTU" field is empty and grey (read only) so i get error message: "Couldn't add New Interface - l2mtu wrong (6)". It is only possible to add interface via terminal. I tried with winbox 2.2.18 and 3.0rc12. On my second rout...

trottolino1970

Anyone can send me the manual to f.meduri@routerositalia.it
Thanks

sent from wifi device using Tapatalk

trottolino1970

this script work with apc smart sc-420?

trottolino1970

anyone can help me?
i try but not work

trottolino1970

I read in this forum about some news seem be more stable and with less error

trottolino1970

Contact support for 1.14rc test version if you expertise problem, but I thing final version will be release very soon.

ok thanks

trottolino1970

hello to all,
where i can download the new version of this product?
also rc is good thanks

trottolino1970

Good morning to all. I have this scenario: Rb 2011 ad pppoe client, in LAN it have a DHCP server and WiFi configurate ad ap bridge. Then i have a second rb : i can connected this second rb or in WiFi or in ethernet with the 2011 bit i want create a roaming so my client can connect or to the first or...

trottolino1970

on usb i can connect any hdd? i hope yes

trottolino1970

Up anyone can help me ?

sent from my nexsus 7

trottolino1970

With external usb disk i can configure a user with a specify folder ?

Inviato dal mio GT-I9505 utilizzando Tapatalk

trottolino1970

See this http://www.routerositalia.net/forum/
For italian users and not only!
Has numerous guides in italian languages like:
routing, bridging, vpn, wireless, scripting and other kind of configuration!

Also www.routerositalia.it

Inviato dal mio GT-I9505 utilizzando Tapatalk

trottolino1970

I do it but i have a loop

Inviato dal mio GT-I9505 utilizzando Tapatalk

trottolino1970

I have 2 antenna configurated in bridge mode abd one rb 2011 as pppoe client. The problem is the following: the two antenna are connected on different ap but the ap are connected on the same pppoe server. So if i connected the two antenna in the same moment i create a loop on the neteork. I can conf...

trottolino1970

how i can delete file form usb with a particular extension?

for example i want delete all file with extension .jpg

trottolino1970

Ok, I'll call it a beatiful day once the RB will be replaced. By the way which ROS version did you use on your 951?

6.4

Inviato dal mio GT-I8190N con Tapatalk 2

trottolino1970

Hi, you're probably need to send it back to the distributor. The routerboad and Dude work fine as long as you don't reboot it. After reboot it goes into a infinite restart loop. Unfortunately I have experienced the same with a 951G last week and 6.15rc. I have flagged this post as a bug report to M...

trottolino1970

hello to all.
i install it but my rb go reboot every time

trottolino1970

ok, i instal it but how i can configure?

trottolino1970

trottolino1970,

you're welcome. assuming that you have a usb port in your router, you can use a usb pendrive to store dude settings (SYSTEM>STORES)

let us know how it works out for you.

wonderfull idea, i try in the next day

trottolino1970

there isn't the versione for this rb
You can install the MIPS-BE version on each MIPS-BE routerboard:

http://download.mikrotik.com/dude/4.0be ... mipsbe.npk

i try it thnks

trottolino1970

there isn't the versione for this rb

trottolino1970

yes, you can install dude on 951.

where i can download it?

trottolino1970

Hello to all, my question is: i can install the dude on rb951 with 128 of ram?

trottolino1970

i know this www.routersitalia.it

trottolino1970

Hi, i have just upgraded to v6.0rc13 and i did now observe a problem with the so called NAT punching. I user the application "SoundJack" its a online "live music jam" software. http://www.carot.de/soundjack/ But i dont get why the connection will not work. I have also tried to d...

trottolino1970

Please explain more clearly what do you mean by two authentications.

i have three ethernet :
1) adsl;
2)pppoe server;
3)pppoe server.

i can do it?

trottolino1970

i can set two authentication on my mikrotik?

trottolino1970

also i have the same problem. the cpu work at the 100% with a new configuration

trottolino1970

you can solve this by disabling RouterOS proxy

ahahahahaha

trottolino1970

proxy hides your ip. your ip is sent in X-Forwarded-For HTTP value

how can I solve this problem?

trottolino1970

i have a problem with webproxy. it is the following: i have set the right rule but when i go in a site i cannot see it.
i have a pool of public ip but i go on internet with the public ip of the mikrotik.
where is the problem?

trottolino1970

i have a problem with webproxy. it is the following: i have set the right rule but when i go in a site i cannot see it.
i have a pool of public ip but i go on internet with the public ip of the mikrotik.
where is the problem?

trottolino1970

hi to all.
i want configure user manager for pppoe server. I must configure also radius or i can use usermanager without radius?

thanks to all

trottolino1970

How to send email to servers that require authentication?

no

trottolino1970

server: xx.xx.xx.xx (mail server, is public ip)
from: myemail

but for me the problem is that my mk not surf also if the dns are correct

trottolino1970

my mk don't send email (log). Where is the problem?

trottolino1970

/ip firewall filter add chain=forward protocol=icmp action=jump jump-target=icmp works fine for me on RouterOS 3.18. You should try reseting your router back to defaults and test again or Could you please show a screen shot of the error you are receiving. Are you adding it through Winbox or CLI? -L...

trottolino1970

why add chain=forward protocol=icmp action=jump jump-target=icmp returm me error in mk 3.18 version?

trottolino1970

how many customers in total support?

trottolino1970

I have to block the dhcp because I have problems on the network

trottolino1970

to block dhcp server altogether use feature from dhcp-server, set it authoritative=yes

where i set it

trottolino1970

chain-forward
source ip - your ip subnet i.e. 192.168.0.0/24
protocol - udp
ports 67 & 68
action - drop

i had do it but not work

trottolino1970

if you have routeros handling your DHCP requests then set authoritative to yes and that will solve your rogue dhcp server problem.

i have all dhcp disable also in my router also in my ap

trottolino1970

You gave very little information, but from what I can see your client probably connects using a 2.4GHz AP/Bridge, and you have default forwarding on on your highsite. I suggest disabling default forward on your 2.4GHz distribution interface, and make sure all Access List entries are also set to not...

trottolino1970

So how do you know that script isn't working if you don't have a script

i search a script if anyone have it

trottolino1970

Post your script here

i don't have script. I search a script

trottolino1970

You will not be able to use ping-speed from script properly. Instead you should use bandwidth-test.

Run a for loop in which bandwidth-test is executed with specified interval value.

yes ok i read another topic of bandwidth-test, but in my mikrotik dont work. I use the last version

trottolino1970

Describe in details what exactly you want to do with this script.

i want to use ping speed to test my bandwith on my customers without i ping one to one customers. For example i want to ping and interval from x.x.x.1 to x.x.x.254

trottolino1970

i have a similar problem the bandwith test not running because ask me username and password. ok, but whic username and password i can set in it?

trottolino1970

I have a problem with a ethernet, not function but it is integrated in my computer and if i try it without mk it function with the mk function same time. Which is the problem?

trottolino1970

nothing can help me?

trottolino1970

Hi, I am doing an script for MikroTik 333 to automatically get an estimation of the wireless bandwidth channel through the MikroTik diagnostic tool ICMP Banwidth Estimation, the problem is that i haven't found any way to stop the /tool ping-speed command automatically when the script executes that....

trottolino1970

hi to all.
i try a script for ping about 30 customers for test ping and bandwith. Anyone help me?

trottolino1970

ok i write it but all is ok execept the last that dont produce traffic. It's normal?

trottolino1970

This should done in a jump rule but here goes nevertheless; /ip firewall filter add chain=forward protocol=icmp icmp-options=0:0 action=accept comment="Allow Ping" /ip firewall filter add chain=forward protocol=icmp icmp-options=8:0 action=accept comment="Allow Ping" /ip firewal...

trottolino1970

You should only block certain (type/code) ICMP packets, not unilaterally.

So accept 0:0 and 8:0 (both Ping) and 11:0 and 3:3 (both traceroute) and 3:4 (Path MTU Discovery) and then drop the rest.

can you help me writing a good rule?

trottolino1970

-----
Hai fren,

no, and better when it traffic will put difference traffic on the networks.
i love investigation with ping command simple for.

regards
Hasbullah.com
------

yes ok but if i block ping isn't a new security for my customers to prevent attack?

trottolino1970

It's good to block ping from the internet to my customer?

trottolino1970

Ok here it goes... "It depends".. I know just what you wanted to hear... :? SCSI = NO. There is no support for SCSI in RouterOS (There are NO plans for it at this time (Last I spoke to MikroTik)) IDE , SATA = This depends on the controller. If the host adapter / Controller "Hides&quo...

trottolino1970

i can mount a server raid with mikroitk os?

trottolino1970

http://www.mikrotik.com/testdocs/ros/3.0/qos/filter.php

set DST-ADDRESS and action DROP. The address can only be an IP or you can also use PORT for some specific IM programs.

can you write a good rule?

trottolino1970

use firewall

yes ok but in which mode i can block it

trottolino1970

how i can block it?

trottolino1970

if your destination "bandwith test" using same MT, provide with user & password for bandwith test (hope works)

which username e password?

trottolino1970

not work but its configuration is ok? which is the problem?

trottolino1970

hi to all.

i have this problem: one mikrotik is configurated with three ethernet. So one ethernet is for adsl one for my pruvate lan and the other is for some public ip of my private network.
it's ok as configuration?

trottolino1970

jordantrx
hilton
trottolino1970

I am very very thanks to your attention.. now I am will tray to upgrade my Mikrotik version and back to you.....

regards

k
i am here for helph to you if i can

trottolino1970

I am using( mikrotik v 2.9.27)
netsysstar, you really really really need to upgrade to 2.9.51. If you own a license then it's no big deal, if not then fork out the couple of bucks and get legal.

you can block their account and show to them a web page to notify it with a rule on the nat

trottolino1970

now all function. The problem was the packet marked. Thanks to all

trottolino1970

Show me
/ip firewall nat print
If there is not a masquerade statement there, you will not have a gateway. It will be unreachable. No route to host.

there isn't nothing masquerade, but i can masquered the public ip?

trottolino1970

k but if i search a public ip from another adsl connection it's k all, but if i search a public ip of my client in the same mine adsl i don't search it i can put here the configuration without ip address for security, but in this way we cannot resolve the problem ---- Hai Fren, Ok, just for verifica...

trottolino1970

or look maby you add ip address with the same gateway and it dosnt work..Bye

Reguards

no it's k
but dont work

trottolino1970

your gateway :) please ask your network administrator. and if you are the administrator - please ask your ISP (and read some TCP/IP basics books) good idea can you send me a book? or want that i send to you my book . Ei baby my problem is on the mikrotik not in my mind :lol: please describe your pr...

trottolino1970

your gateway

please ask your network administrator. and if you are the administrator - please ask your ISP (and read some TCP/IP basics books)

good idea can you send me a book? or want that i send to you my book . Ei baby my problem is on the mikrotik not in my mind

trottolino1970

which gateway?

-----
Hai fren,

check and make sure your default ip gateway should correct entry.

regards
Hasbullah.com
-----

i have this problem: my mk says if i ping a public ip : no route to host and my mk not resolve the dns if also the dns function.

i can resolve this problem?

trottolino1970

i have this problem: my mk says if i ping a public ip : no route to host and my mk not resolve the dns if also the dns function.

i can resolve this problem?

trottolino1970

TTL expired during the transition what mean?

trottolino1970

I'm not sure about trottolino1970, but I'll use my own question and hopefully it's the same. I use PPPoE for all my wireless clients for authentication on the network and for rate-limiting. A typical queue would be 512k download/256k upload. Any suggestions for the best type of queue for this appli...

trottolino1970

hi to all. i try all but in my mtk dont work because the web server is in the same class of my customer. I wan toresolve this proble, in wich mode?

trottolino1970

Depends on what you are trying to accomplish

a pppoe sever

trottolino1970

for the pppoe is better pcq or pfifo or?

trottolino1970

its work for me in 3.4 and 2.9.50

Can you post your pppoe profile configuration ???

56k/1024k 56k/1024M 56k/2048k 1 56k/1024k

trottolino1970 · Re: how to configure burst? what version do you use ?? 2.9.42

what version do you use ??

2.9.42

trottolino1970

what do you mean with PPPoE reboot ???

pppoe is not stable

trottolino1970

u have to configure burst in a radius server..

try using mikrotik's dictionary http://www.mikrotik.com/documentation// ... y.mikrotik
and you can also configure it using ROS local Profiles

brust.jpg

Queue.jpg

if i put this configuration, the ppoe reboot always

trottolino1970

I'm sorry I'm not able to understand the problem. Probably you can give more clear explanation, where is the problem.

How do I stop ip request by the network card of my customers?

trottolino1970

I am presenting my problem: Customers ap set as a client. The client is connected to the PC through an ethernet cable on which network card there is a fixed IP address, but left dhcp. After having the pppoe card network always seeks an IP address (which obviously is not). How do I prevent this happe...

trottolino1970

4096k/4096k 4096k/4096M 4096k/4096k 1 4096k/4096k

this is correct?

trottolino1970

how to block shared connection of my client?

trottolino1970

Hi trottolino1970,

Check the following link:
http://wiki.mikrotik.com/wiki/Hotspot%2 ... priorities

Same scenario is working fine with pppoe

Regards,
Alaa

and to show me burst for pppoe?

trottolino1970

how to configure burst for my client in pppoe server?

trottolino1970

I disable WWW on all of my units, mostly to prevent botnet scanners from finding them. That also has the benefit of "hiding" the router from customers.

who is botnet?

trottolino1970

you may try to block his MAC in firewall 'input' chain

is masquerade from apclient

trottolino1970

How can I stop a customer who tries to connect with pppoe username and password?
I would like to blacklist

trottolino1970

and if don't take a script?

trottolino1970

Hi, i created these 2 simple rules for firewall forward and this work very fine...... do not say it to anybody ;) :D 2 ;;; BLOCK SPAMMERS OR INFECTED USERS chain=forward protocol=tcp dst-port=25 src-address-list=spammer action=drop 3 ;;; Detect and add-list SMTP virus or spammers chain=forward prot...

trottolino1970

How can I hide the mikrotik to my customers? That is, if their type 10.xxx opens to the webpage mikrotik and this should not happen

trottolino1970

are broadcast packets affected by forward chain?

And how to block them?

trottolino1970

how to block dhcp from my client to my router with a script?

trottolino1970

how to block dhcp from my client to me and Sharing files and folders?

trottolino1970

As I set mtu and mru on a mixed network? My customer makes the pppoe or through the router, or through computer

trottolino1970

If they don't have a username/password, they won't auth. You could also block there mac if you wished in the firewall.

Which is the best value for the mtu?

trottolino1970

Someone is trying to make the pppoe pppoe on my server. How do I lock and peremttere to make pppoe only to my clients?

trottolino1970

My mikrotik is set as pppoe server. I would assign a public ip to a client without him doing pppoe. How can I do?

trottolino1970

is this possible without the built-in wireless AP device/? Hi: I have the same situation in my network it is very important to me to isolate my clients from each other because I think it is the suitable solution for my nightmare (MAC Spoofing) (MAC Cloning) no, you can't. if customers are in one la...

trottolino1970

fosben wrote: chain=dstnat action=dst-nat to-addresses=85.252.x.x to-ports=80 src-address=85.252.x.x dst-port=80 protocol=tcp comment="customer doesnt pay" disabled=no ok first of all 85.252.x.x is your web server IP right? then what is src-address=85.252.x.x ? src-address should be your ...

trottolino1970

disconnect it !

good idea

trottolino1970

upload a web page(with a nonpayment notice) to a web server, make a address list named= nonpaid user, add non paid user ip to that address list, then make dat nat rule with src-address= nonpaid user and dst-nat to your web server ip and port.

Thanks maybe it would be helpful to you.

not work

trottolino1970

what class?..

describe your configuration

I do not think the amounts class pensosia solve the fundamental problem or at least have an idea dicome resolve

trottolino1970

update to the latest version. I don't remember exactly, but as far as I remember it was fixed in late versions

I never get a chance to make the upgrade. How can I solve?

trottolino1970 · Re: how to block other connection!! what ROS version do you use? 2.9.42

what ROS version do you use?

2.9.42

trottolino1970

i have a problem with pubblic ip. My webserver is in the same class of my client and then not see my webserver page. I can resolve it?

trottolino1970

how to block my client that not pay and i show to them a page of my webserver?

trottolino1970

Use Firewall rules to stop it and disable default forwarding.
this is working only with wireless clients.
Default forwarding is for wireless
firewall rules for IP (layer 3)

Maxi
http://mikrotikexpert.com
http://maxid.com.ar

yes but not work

trottolino1970

My connections there are some of them marked with protocol to zero. How can I stop these connections?

trottolino1970

My mistake, Netbios port is 135-139. Try blocking ports 135 to 139. In chains INPUT and FORWARD and UDP - TCP protocols.

Ok. Now I want my customers among themselves do not see why if one has fixed ip of the same class can still see each other.

Thanks for the help

trottolino1970

What caind of traffic do you want to block? This rule bloks shared folders (NetBIOS)

k but i see shared folder

trottolino1970

Then block port 137 to 139 TCP and UDP (NetBIOS), if you want to block traffic between client APs then disable the "default forward" option in your wireless interface.

this rule not work

trottolino1970

Block ports 67 and 68, in TCP and UDP.

http://www.comptechdoc.org/independent/ ... tdhcp.html

And do not see computers between them?

trottolino1970

how to block dhcp from my client to me!!

trottolino1970

how block connection of p2p?

trottolino1970

how block connection of p2p?

trottolino1970

Thank u

it's true for pppoe?

trottolino1970

my ros not go to internet but the dns are assigned. Why?

trottolino1970

Yes,
But i'm not sure about what you're asking...
Be more specific please

i have two different adsl in two different place so i want use two mikrotik for different authentication. it's possible?

trottolino1970

i can use two mikrotik for two different adsl?

trottolino1970

what is "blurred" emule?

offuscation

trottolino1970

How can block the protocol of blurred emule?

trottolino1970

Well change the hotspot variable for what you want in PPPoE

I must only change hotspot with pppoe?

trottolino1970

Hello!!
Like say MRZ, look for in the Wiki, there is an articule written by Alessio that explain how to make an AntiSpam with a server HotSpot
Good Bye
Rafael Lore

ok but iwant with a pppoe server

trottolino1970

where I can find one script for the control of the Spam?

trottolino1970

you can make a DST-NAT rule to redirect all browsing attempts to a specific webserver, which will inform this client that he has not paid. i'm didn't uderstand the idea can you explain it ....... any one had been understand it can explain..... thanks for all if you want send a message to your clien...

trottolino1970

ok if i make passtrought only to connection.mark and not passtrought to packet market , all ok for all

trottolino1970

good idea to me work very well

trottolino1970

Look when u mark and disable the passthrough option packets that matched that rule (source, destination) will not apear in the lowest levels If u have 2 adsl. you have to mark and disable passthough option to mark your traffic for all marking(Connection and Packet) but in this mode the queue is sto...

trottolino1970

when you enable passthrough it means that packet will continue to be marked or something else done by the next rules example /ip firewall mangle add 11 chain=prerouting src-address=191.203.26.196/31 dst-address=84.235.229.0/24 action=mark-packet new-packet-mark=123 passthrough=yes 12 chain=prerouti...

trottolino1970

everyone says that passtrought is able or enable. so what i do?

trottolino1970

This is a example how to QoS P2P traffic: /ip firewall mangle add chain=forward connection-mark=!p2p_conn action=mark-packet new-packet-mark=other /ip firewall mangle add chain=forward p2p=all-p2p action=mark-connection new-connection-mark=p2p_conn /ip firewall mangle add chain=forward connection-m...

trottolino1970

If you read the doc you will see that you can block the broadcast

M.

can you tell me how i block the broadcast?

trottolino1970

read this document to know how you can drop broadcasts and how /ip firewall filter works:
http://www.mikrotik.com/testdocs/ros/2.9/ip/filter.php

yes ok but i can block it or no? which i can block?

trottolino1970

yep... this should be work... paste your export configuration please.

now all ok thanks

trottolino1970

You can set te Upload and Download in each profile, this profile must be associated in te pppoe secret of the user, then when the user log in a dynamic queue will be created limiting upload and download that you specified in the profile. Example: This profile set 128k upload and 256k download / ppp...

trottolino1970

I have a small problem with the management of the band. I explain myself: in the section pppoe I have created several the profiles settando upload and download, my large problem is that my customers exceed (a lot) upload cutting also the band in download. In order to obviate to this problem momentar...

trottolino1970

Hi Janisk, I did it well... I was confous before, I shared the internet connection to 2 networks, LAN and WLAN, but everything is OK now, I also solve my client's http download problem that caused all the other clients can not browse. Your configuration is really good... once more thks.. And if I h...

trottolino1970

I have not understood the behavior of the passthrough well I must activate or not? In which cases I must activate it or no?

trottolino1970

i take the follow from manual of mikrotik: / ip firewall filter add chain=sanity-check protocol=tcp psd=50,3s,3,1 \ action=add-src-to-address-list address-list=blocked-addr \ address-list-timeout=1d comment="Block port scans \(causes high \ cpu load\)" disabled=yes add chain=sanity-check p...

trottolino1970

i want run a script. How i can do it?

trottolino1970

Pls can i also have the config an new to scripting my email address is onowojemma@yahoo.com

pls send me the configuration without comment at fmeduri@email.it

trottolino1970

i can block it? if yes how do it?

trottolino1970

you can not do download, if you can not send request.

yes but a request not send 1,2 mb of upload

trottolino1970

you can not do download, if you can not send request.

yes but a request not send 1,2 mb of upload

trottolino1970

Hello I use pcq queue's and they work very well. I have 2 quostions. If I create a queue type pcq for upload and download can I use this on all my simple queue's? Eg web, voip, games etc or should I create a new pcq queue type of each one? Also, I have played with limit & total limit on the pcq...

trottolino1970

I think, it show that your configuration work perfectly. You have to understand, each data transaction use both upload and download. Client send request to server, this is upload traffic, and then server will respond and sending data back to the client (download traffic). If you don't have upload q...

trottolino1970

hi to all I have a small problem: after to have created the profile for the pppoe, when a customer composes pppoe the limits of upload comes exceeded respect going to block also the download. How I must resolve this problem?

trottolino1970

what is your setup or scenario, what are your requirements? Regards Faton i want to use it but i dont know how trottolino1970, I realize that you might indeed be looking for guidelines on how to solve your configuration problems, but you really are asking for help in the most uneffective way I can ...

trottolino1970

what is your setup or scenario, what are your requirements?

Regards

Faton

i want to use it but i dont know how

trottolino1970

my mkt in log send a message as <09.....> sent LCp etc etc.

What mean it?

trottolino1970

how configure the parameter of pcq queue?

trottolino1970

Like one in Texas and one in Arizona? Sure, go for it!

Seriously, please be more specific in describing your problem.

--Tom

i have two adsl in two different place so i want to mount two mk. It's possible?

trottolino1970

i can use two mk in two different place for pppoe server?

trottolino1970

First of all you have to specify where did you get spam ? 1) Mail server, then you have to improve mail server settings. 2) If you have open proxy on the router that is being used as spam relay, restrict access to the router by 'ip proxy access' or 'ip firewall. o thnks but i want to put a rules fo...

trottolino1970

Color GREEN represent data IN to your router.
AND
Color BLUE represent data OUT from your router.

Rafiq...

green upload from my clients and blu donwload of my clients?

trottolino1970

how I can avoid Spam email from the publics of my customers?

trottolino1970

only perspective from Router

so what mean?

trottolino1970

nothing??????

trottolino1970

what mean in and out in graphing? phearps upload and download?

trottolino1970

what mean?

trottolino1970

Hi Trottolino,

What is exactly Your problem?

Hotspot with 4 ADSL MUST work!

Paolo

I do not succeed to shape it

trottolino1970

Hi trottolino, in English please. Mail me, paolo (at) wiplanet (.) it

it is possible that with 4 ADSL hotspot does not work?

trottolino1970

perfetto visto che parlate italiano vi chiedo una cosa uso mk per pppoe server con 4 adsl. é possibile che l'hs nn mi funziona?

trottolino1970

this rule function so? i put this rulein my mikrotik but i dont know which address and which rule i active
help me

trottolino1970

with which cards you have had problems? which are the best ones?

trottolino1970

you would need to use a RADIUS server of auth and log the sessions to a database.

hth

why radius server?

trottolino1970

Hi to all. I would want one information: when the mikrotik creates pppoe in automatic rifle creates I one simple queue. End here all ok. The problem is: how I can render statics this simple queue in such way that does not recreate every time that falls the pppoe? Thanks

trottolino1970

Hi, you should understand, every TCP data packet, required uplink and downlink. HTTP download doesn't mean you don't need uplink traffic. The client still need uplink to send HTTP request, and after handshake process, then it makes downlink traffic. In your case, maybe you need to open more uplink ...

trottolino1970

I explain you my problem: use mikrotik like pppoe concentrator creating of the profiles based on the abbonament0. End here all ok. The problem rises when a customer executes the pppoe: in automatic rifle mikrotik one simple queue for every is created pppoe. Now if the customer exceeds the guaranteed...

trottolino1970

It seems to work ok for me

Whar was you problems? perhaps we can help fix?

my problem is that the cpu of my router os is always 100% andthe route list (pppoe) is crazy

trottolino1970

http://www.mikrotik.com/testdocs/ros/2.9/

i know it but i want a simple file of configuration to put in my os router and then test it with my adsl

trottolino1970

where I can find one simple configuration of the mikrotik?

trottolino1970

Hi there. You have noticed that with new release 2.9.43 there are problems in IP -->Routes or it has only succeeded me? Moreover this version me seems less stable of the previous one. it's only one my impression or mistake something?

trottolino1970

/ppp secret export

you can use export command on any submenu to export its configuration

thanks

trottolino1970

what kind of account are you talking about?

pppoe

trottolino1970

thanx

and if i want export only account?

trottolino1970

the shielded one of the login does not appear me of the hotspot. Why?

trottolino1970

who is username and password of default of usermanager?

trottolino1970

execuseme but i want to see a bgp configuration or as i configure a bgp

trottolino1970

i can see a configuration of BGP?
thanks

trottolino1970

what's the best mtu for pppoe client?

trottolino1970

What's new in 2.9.43: *) routing-test - changes that are aimed at increasing perfomance and reducing memory usage: limit number of outstanding bgp updates, sending feeds to many peers uses bounded amount of memory; *) fixed bug - telephony was crashing whenever voice-port was changed; *) ups - fixe...

trottolino1970

Hi all,
I apologize in advance if this is a stupid question, but I wanted to log in as userman from http://router_ip/userman, and I don't know which username and password have to be used to log in.
Anyone can help me?

Thanks!
Giovanni

Search found 192 matches