Mikrotik CHR run on Proxmox fine.
For testing purpose i use 1 core (4core xeon with HT) and 256 MB ram.

If You use Gigapit POE - please try with another. Sometime poe injectors falls

Access list is OK. mac-address=4C:5E:0C:57:17:13 interface=wlan1 signal-range=-120..120 authentication=yes forwarding=yes ap-tx-limit=0 client-tx-limit=0 private-algo=none private-key="" private-pre-shared-key="" management-protection-key="" vlan-mode=no-tag vlan-id=1 N...

Well we are using nstreme everywhere on our network, AC and N hardware, SXT's, Netmetals, OmniTik's and DynaDishes without any problems. 6.33.3 and 6.33.5.

Please, post configs for Dynadish5 ot both sides?

At this point the logs on the station side will be more helpful. With added wireless logs. First - just change mode to NSTREME and 802.111 11:34:57 wireless,info 4C:5E:0C:55:3D:A3@wlan1: lost connection, synchronization t imeout 11:34:57 wireless,debug wlan1: must select network 11:34:57 wireless,d...

I will but I've been very busy lately and haven't had time to go search on how to enable advanced wireless log reporting. If you could post how to do this, it'd be appreciated. I've never had to enable it before. Normally the log already displays things like registration errors, poll time-outs, etc...

I have same problem. Watch earlier posts. Two Dynadish 5. Connects only in NV2. Latest firmware and stable software. I am WISP, have MTCNA, MTCRE, MTCWE and MTCTCE. I think that know what i am doing. I was able to reproduce problem with two SHT HG5 - with latest firmware and RouterOS they connects o...

My configs: Now link is working on NV2 On Bridge side: /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyac channel-width=\ 20/40/80mhz-eCee country=bulgaria disabled=no frequency=5660 \ frequency-mode=regulatory-domain mode=bridge nv2-cell-radius=10 ssid=\ SSID tdma-period-size=1 wd...

I use Dynadish 5, and can't set AP-mode. Other difference is country code - i am in Bulgaria (BG). Tried superchannel, frequency list without cuccess. Just won't connect.

With AC, we've noticed our PtP's perform much better using Nstreme than NV2. We just upgraded an 802.11n single-chain metal bullet using Nstreme, to AC NetMetal dual-chain, and Nstreme won't connect at all, nothing even on the log for failed regs or anything!! NV2 performance is just HORRIBLE, but ...

are you using CRS as a router or as a switch??

As a switch with master ethernet port.
Same problems with 6.28, latest RC and 6.23

I have the same problem with CRS212. Loss of packets in bwtest and link up/down on sfp interfaces in few seconds

Hi, I have the same problem with Mikrotik ant TL-WA501G. Clients TL-WA501G connects and after few seconds disconnects from mikrotik AP (ap-bridge mode).
I solved problem with oldest firmware from http://www.cyberbajt.pl/cyber.php?get=d ... CTL-WA501G.

Some advices:
antenna-gain=0
basic-rates=1 for 802.11b
basic-rates=6 for 802.11 a/g
ack-timeout= dinamic (i am not sure, but do not put in indoor)