MikroTik

ofer

Upgraded 3xHapAC from 6.48.3 -> 6.48.4 - seems to be working ok so far

Thanks!

ofer

Upgraded 3xHapAC units 6.48.1 > 6.48.2 - No issues so far

Thanks!

ofer

Updated 3xHapAC 6.47 -> 6.47.1 - So far no issues.
Updated 3xHap Lite 6.47 -> 6.47.1 - No issues.

Regards.

ofer

Updated HapACx3 from 6.46.6 -> 6.47 - I haven't encountered any issues.
Updated HapAC Lite x3 from 6.46 -> 6.47 - No issues so far.

ofer

Updated 3xHap AC from 6.46.1 -> 6.46.2 - Seems to be without issues
Updated 3xHap AC Lite from 6.46.1 -> 6.46.2 - Caps master/slaves are functioning there were no issues with update

Thanks!

ofer

Updated 3xHap AC 6.46 -> 6.46.1 - so far without issues
Updated 3xHap AC Lite 6.46 -> 6.46.1 - No issues, I'm using CAPSMAN but this upgrade was done manually

Thanks!

ofer

Updated 3xHap AC 6.45.7 -> 6.46 - so far without issues
Updated 3xHap AC Lite 6.45.7 -> 6.46 - no issues

Thanks!

ofer

I won't go into details but I have a similar setup with HDTV and VLANs also with HapAC and the issue here is not in FastTrack
FastTrack is just a way of forwarding packets without using substantial amount of CPU.
I suggest you take a look here https://www.youtube.com/watch?v=C3U06olRmEk

ofer

Since the release of 6.45.1, neighbor discovery on our networks don't show IP addresses; only MAC addresses and other information. I suspect it's because we carry our admin traffic on a VLAN, and the default VLAN is unused. My suspicion is, thanks to: *) discovery - correctly create neighbors from ...

ofer

due to bridge configuration changes
Can you post what did change?

It was a masquerade rule that was configured to allow access to the next router, the rule was disabled and showed an error I modified the output device from a specific ether within the bridge to the parent bridge itself.

ofer

Upgraded 3xHAP AC from 6.45.5 => 6.45.6 I had a small issue with IP firewall rules that stopped working due to bridge configuration changes but it was a minor issue that was easy to resolve Upgraded 3xHAP AClite from 6.45.5 => 6.45.6 No issues although only one of the upgrade was done manually the t...

ofer

Maybe I am looking with my nose.. but is there a changelog available? Currently v7 has v6.45.5 feature set. Main change is a new Linux Kernel, rest of features will gradually come out in next builds as for now we want to ensure that v7 is stable on hAP ac^2 and WAPGR LTE/4G/LTE-US boards mainly (an...

ofer

please also share MIPSBE version

ofer

Upgraded HapACx3 6.45.3 => 6.45.5 no special issues, all is good.

ofer

Upgraded 3xHapAC and 3xHapAC-lite all without issues.
Thanks!

ofer

Upgraded HapACx3 6.43.3 -> 6.45.1 - no issues

Thanks!

ofer

Upgraded 3xHAP AC 6.44.1, 6.44.2 -> 6.44.3 - no issues.

Thank you!

ofer

3 x HapAC 6.44.1 -> 6.44.2 so far seems all is good
Thanks!

ofer

3xHAC AC were updated from 6.44 to 6.44.1 no unexpected issues.

Thanks!

ofer

Guys, what are you arguing about? Everyone of us knows the v7 release date. Really. Just a mathematics. We are at 6.44 now. Each release requires 3-4 months. So.... 700 - 644 = 56 release cycles. 56 * 4 / 12 = 18,(6) years. So, the year 2037 will be year of 7.00 release! P.S. Don't thank my estimat...

ofer

they make a decent enough devices https://www.devolo.com/

ofer

maybe skip straight to RouterOS X (10)
But for now it's RouterOS 9 ("Nein" in German)

Don't worry you'll have RouterOS 7 soon enough.. (when pigs will fly)

ofer

How about Windows version ?

I checked and it seems to be written in go so I think it's possible to adapt the source code for windows too or Just boot a Linux VM

ofer

Before he said that. You didn't know about March 15, right? OK so, please wait for a similar statement. How about you get the big boys at Mikrotik to the table so we can have an adult discussion? You're only showing us how worthless the MikroTik training is since there is "no v7", no road...

ofer

Updated 3x HapAC everything seems to be ok, will test fixes later.

Thanks for the effort!

ofer

take a look here viewtopic.php?t=111005

ofer

I submitted a support ticket [Ticket#2019010922003975] as well

ofer

Will the V7 add an LCD to the 4011 product line ?

Yes along with a unicorn to fetch the ROS v7 from a rainbow

ofer

2019?

Router OS v7 is never going to happen.

ofer

Hm interesting. All my IoT devices use another SSID, the main SSID ir only for phones and computers. If you all do the same, do you still see the issue? Do all of you actually have NEST devices? I do have the Nest Thermostat so I can check and see if it's actually the cause of the issue. Seems to b...

ofer

Hm interesting. All my IoT devices use another SSID, the main SSID ir only for phones and computers. If you all do the same, do you still see the issue? Do all of you actually have NEST devices? I do have the Nest Thermostat so I can check and see if it's actually the cause of the issue. Seems to b...

ofer

Ofer, It doesn’t matter if you have IPv6 package or not because it is pure layer 2 transmission (like broadcast). Actually having IPv6 package might help with setting up some IPv6 firewall rules :) Just stating the details but I'll try to configure it to drop IPv6 packets I'm curious to see if it'l...

ofer

Ofer,

If you have only one AP and the firewall is processing bridged packets then blocking ICMPv6 should do the job.

I thought about dropping all IPv6 packets from the Nest across all my routers, I don't use IPv6 anyway and I removed that package from all the routers.

ofer

This discussion is all about connectivity issues on new Apple CPEs like iPhone XS or 2018 iPad Pro. I understand that, I'm just trying to guess whether client isolation on AP can be a workaround for the problem. I plan to make some changes to the firewall to drop all ipv6 communication from the Nes...

ofer

I mean there were years since start of it's development and we still wait blindly...
You say that, like there had been no new features in v6. In fact, most exciting stuff that was meant for v7, was already ported to v6.

OpenVPN with UDP connections

ofer

3xHAP AC units upgraded - seems to be no new issues, However AC with 80MHz channel width still causing random connection drops

Thanks!

ofer

We want to understand if this happens with particular iPhone models. Could you please send us the iPhone model and part numbers on which you experience the issue? You can also do it privately by sending it to support@mikrotik.com. The strings should be something like this: MT9H2ET/A A2097 This part...

ofer

Yes, any helpful data would be beneficial, since we cannot repeat any of the described issues. I also have an Xs and some other people here do, none of us have seen any issues with hAPac, wAPac or other routers, we have done extensive testing here in the office and also use these devices at home. T...

ofer

Hello, I have two iPhone XS units and I'm seeing the same issues result with random DNS failure especially while refreshing from the phone. Things has gotten better with 12.1 but I had the issues since initial IOS version (v12) and Mikrotik was at v6.43.2 (now upgraded to 6.43.4) I have 3xHap AC uni...

ofer

Without the dates it's useless, please add the dates as well

Thx,
Ofer

ofer

I did it using a network switch in between the computer and the router it seems to works much better

ofer

I updated my 3xHAP AC units everything seems fine but a couple of iPhone XS units that still have issues
There seems to be a DNS query rate limit so after a while the phones are not sending queries anymore(Apple fault?)
I'm open to ideas about this issue

Thanks!

ofer

+1 i hope it'll be included in the next major version

ofer

autossh rely mainly on a ssh trust between two systems for passwordless login and will initiate the ssh connection whenever it is not up you can also configure the tunnel to "push" the local ssh port to a remote location or "push" a remote ssh port that the computer can reach to ...

ofer

Best way would be to close all the ports from the outside then use autossh to tunnel the ssh port from behind the router to a remote location so you would actually have access to a system behind the router through ssh and then tunnel the Winbox port remotely this way nothing remains open. it can als...

ofer

I upgraded software and firmware for 3 x HapAC, No issues so far.

Thanks!

ofer

Upgraded 3 x HAP AC, no issues so far.
Update: I disabled PMKID on the units, no issues as well.

Thanks!

ofer

+1 for Wireguard reference as it's currently being reviewed for kernel inclusion
http://lkml.iu.edu/hypermail/linux/kern ... 06622.html

ofer

Upgraded HAP.ACx3 from 6.42.5 -> 6.42.6 without issues

Thanks!

ofer

from what I'm seeing from a business perspective there is no point pushing for the mythical v7 as long as the v6 still sells well Mikrotik doesn't see v7 as a priority because v6 still sells. when v6 will become a deterring factor we will see v7 being worked on seriously until that day comes don't e...

ofer

3xHAP AC units upgraded from 6.42.4 -> 6.42.5 without issues

Thanks!

ofer

updated 3xHAP AC units everything went as planned and without issues
bridges HW offloading activated everything seems to be in order

Thanks!

ofer

doesn't looks like an exploit but rather the way Mikrotik enable the devel login in the internal filesystem AFAIK this script only adds the following to the end of the backup file I assume it'll create the directory and that will enable devel login. ../../../nova/etc/devel-login/ Update: I've attemp...

ofer

Bridge will group the interfaces together bind them under a single interface you can refer to Most common SOHO routers sold in stores will use two VLANs to separate WAN and LAN So usually WAN is VLAN 1 and the LAN Bridge is VLAN 2 which group the LAN interfaces I find this configuration very clean a...

ofer

Okay what is different off the top of my head is that you associate the sfp interface to a bridge and not just a standard ethernet type interface entry. I have WANBELL as my ether1 and associate the VLAN to the this interface. I am assuming that if you didnt use a bridge it would be more like my se...

ofer

I'll modify my existing configuration to match what you've told me because my configuration is much bigger and contains several VPNs and Bridges I use the WAN port as bridge for other reasons. /interface bridge add fast-forward=no name=lan-br add fast-forward=no name=wan-br /ip pool add name=dhcp ra...

ofer

I use a similar setup tagging the WAN port and then using a DHCP client on the tag
But it would be helpful to have some configuration details of your specific setup.

ofer

Most fiber providers works the same you usually have to tag the wan port with some additional VLANs and bridge those VLANs to inside your LAN See here for some details with ONT https://www.dslreports.com/forum/r31043915-How-to-almost-use-any-router-with-CenturyLink-s-1-Gig-Internet I did the same fo...

ofer

I had the same issue with my Hac AC you need to stop pressing the button at the exact time the led on the router turns off Then it'll will appear in Netinstall and I would also suggest using a switch to make things easier. I used Netinstall on OSX with VMware fusion and a Windows VM to successfully ...

ofer

Upgraded my 3 HAP AC units from without issues

Thanks!

ofer

This update has bricked one of my HAP AC units to a reboot loop I had to use netinstall to restore it (first time for me)
After netinstall and upgrade everything seems fine

Thanks!

Search found 61 matches