MikroTik

joie

Already looked at that and base firmware is 7 so I cant.go back to 6. I dont like the new menu as I dont know how to do anything. Wheres the connect list at? After retiring its not my job or my hobby anymore so I'm not trying to start over with this new menu system so since theres no way to get the ...

joie

I retired from IT work about 4 years ago so I have not messed with Mikrotik in a couple of years and the wireless interface on this hAP-AC2 is totally different then on my hAP-AC v6.4x. I thought at first it was the Wifiwave2 package so uninstalled that and no change, so I uninstalled the wifi-qcom ...

joie

I've a hAP-AC v6.4x that is dying so I ordered a hAP-AC2 v7.15 to replace it but the wave2 will not support the config in the AC. Is there a way to convert to the, I guess legacy, non-wave2 wireless menus? If not, what MT devices do not use wave2 so I can return this one and get one that supports, m...

joie

I replaced my old rb333 with a new hap-ac by backing up the config in the rb333 and restoring it in the hap-ac and masquarade works but src-nat and dst-nat do not work so none of my servers can be accessed remotly and i can't srcnat traffic through specific public IP's

joie

I have just tried to implement this script and it is not working. I used the script from the wiki which omitted the interface reference. http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_%28FTP Below is the script as I am running it. add action=drop chain=forward comment="Drop FTP Brute...

joie

I cannot access the router at all except buy serial as it fails to boot routerOS and just gives the afore mentioned error message. Nothing has been done to this router in years other than configuration changes, no upgrades, or anything, it just sits in a hole and runs, until the other night when it ...

joie

I've got an RB150 that's atleast 4 or 5 years old and tonight I lost internet connectivity and when i consoled into the router I got "Demo License Expired" but it's not a demo license. I'm currently reloading 3.30 onto the unit but I couldn't get ethernet to work so it's taking 45 mins ove...

joie

So I'm the only one trying to FTP large files behind an MT?

Maybe can one of you MT guys can try this and see if you can duplicate it since I am having the issue on 3 seperate MT boxes two RB150's running 3.30 and an RB750 running 4.17 and two seperate FTP servers showing the same results.

joie

I've got a 16X2 cable connectiona nd plugging my laptop direct to the cable modem i get 16Mb from both speakeasy.net and speedtest.net but plugged into the MT I only see about 3 or 5 Mb. I had an RB150 and replaced it with an RB750 but the same result. CPU usage is never over 10 or 15%. I've tried d...

joie

Got an FTP server behind an RB150 and when I upload files to the server the server is responding with the succesful completion but the client is never receiving the status update. If I VPN into the MT and upload using the internal IP of the server all is well so I know it's not the server. I've trie...

joie

Well damn.

I had tried everything I could think of so I figured it wasn't possible but I was hoping I'd overlooked something.

Vlad, More servers than IP's plus even if I had an IP per server I'd still NAT for the firewall.

Thanks for the response guys.

joie

I've got an internal 192.168.1.X/24 subnet with 192.168.1.1 as the gateway and an external 204.228.X.X/29 public subnet with web and email ports dst-nat to local IP's. I masquarade my internal subnet to the internet and all works well except it also masquarades my internals to the nated IP's, so all...

joie

Anything to keep me from having to carry a laptop up the tower would be great, and if it's a GUI even better, it's so much easier to make changes in Winbox then in CLI.

But a Windows Mobile Winbox would be awesome, I don't care about the iPhone.

joie

Is this why my v3 900Mhz can not connect to a v2 900Mhz card?

joie

Is there a way to block streaming media?

Since different services use different ports is there some common thing that can be used to limit or block it?

I looked under queues but saw nothing there.

Cheers.

joie

I've got a couple 333 boards running 3rc6 (it came on them) I programed them with my laptop a couple weeks ago and now when I try to Winbox in with my laptop it hangs downloading plugins, doesn't matter if I try it by IP or MAC, same response. I can Winbox into other gear just not any of the 333's I...

joie

When I try and install UserMan 2.9.49 it tells me it is for X86 not MIPS. I have downloaded from the main site and the mirror and get the same message.

joie

I have an MT with a couple public IP's and a couple private LAN's on it and I want to be able to masquerade each private LAN's out a specific IP.

joie

Got a hotspot and the walled-grden worked great yesterday but today any page in the walled garden times out. pages not in the waled garden redirect to lonon page as normal. Ideas? *EDIT: More info* Ok so this was a rush adn I didn't have time to set it up in my office and test it so when I was testi...

joie

Did you do this? http://forum.mikrotik.com/viewtopic.php?f=2&t=15122&hilit=&p=76334 MT is not that great for a PPPoE router. I was hoping to use some of them for certain customers but it's just not reliable. Those mangles rules work in my office but if I take the same router to a custome...

joie

What bandwidth do you expect? If are willing to gain bandwidth try Intel inside :) As I wrote before DELL computers seem to work just fine. SSF DELLs are ideal for you./GX115,GX150,GX280/ 20d/30w/40h /in sm/ is enough to enclose the equipment. Don't forget to use metal case not plastic unless you w...

joie

Everything I don't need is disabled and the cards are about 6 inches apart with no antenna so there is some self-intereference, I'm just testing before I mount them. If I run the test from an MT connected to one of the 133's across the link I get 15/20 so I guess i was just overrunning the CPU on th...

joie

I've put together my first Nstreme-dual using a pair of 133 boards and 4 R52-350 cards. I'm running 5Ghz turbo 5210/5800 and I have -68TX/RX and it says 18MbRX 24TX but running a bandwidth test from one radio to the other I only get 3.5MbTX 4.1Mb RX TCP and this is a 12 hour average. I expected much...

joie

Yeah, I'm a bone-head, I knew that had to be reversed but I have no idea how I missed that.

Least I only spent a good hour overlooking the obvious.

Thanks mate.

joie

I just got 2 333's in and one of them died after about 5 minutes (I'm really hoping it was just a fluke) so I'm waiting on the RMA to ship so I can build that link and I've got a pair of 133's here beside me ready to go excpet the Nstreme-Dual's not working so I'm hoping someone will see my post and...

joie

Ok, so I think have it set-up like the example but it's not working, so I guess maybe I am over looking something. It's Monday morning and it's one of them days so here's my config incase I am overlooking something in the settings. First Radio; [admin@NS-1] interface wireless> print Flags: X - disab...

joie

Thank you, I knew it was in there but everytime I searched for it it came back "no results".

Must have not been holding my mouth right when I did the search.

joie

Come on folks, there's plenty of people on here running this so where's the guides at?

I thought it was pretty self explanatory but it sure ain't working so I must be over looking something.

joie

Is there somehwere on this site a guide on how to set this up?

I search all around but all i find are people talking about it but no real examples/instructions.

Somebody want to point me in the right direction?

joie

Where were the 8080 connetions from/to?

You don't have proxy configured and open to the outside world so that somehow you've got people bouncing through you as an anonimous proxy?

joie

Have a customer that has a Catalyst running several VLANS and I've got an MT plugged into the Cat and the inteface plugged into the Cat bridged to an EoIP tunnel to an MT at there remote site where the EoIP bridges to another ether plugged into there local equipment. They have VoIP phones configured...

joie

Assuming you have your own public IP space and your customer is getting a public IP to roam on your network with but you are not using DHCP. 5Ghz backbone from access point back to your core. 2Ghz set as AP bridge, same channel, same SSID, WDS to other 2Ghz in range, bridge through. This will get yo...

joie

Do you want them to be able to roam across your network with public IP's or do you want to give them a private IP scheme, kind of like a hotspot, except only for them?

I'm not sure what your current set-up is so I'm not sure which way to suggest you go.

joie

Sure would be nice if the Mikrotiks would do this automatically like every other router out there. http://forum.mikrotik.com/viewtopic.php?f=2&t=15122&hilit=&p=76334 This works in my office but not at the customers site so I am stuck buying a linksys or someother such router instead of u...

joie

The guy doing the custom login.html was linking to it fromt he hotspot through dreamweaver. He is outside the hotspot network so he connects to *public ip*/hotspot/login.html and the page he sees is the default login.html not the custom login.html you see by going to *private ip*/hotspot/login.html....

joie

Did that, and it shows the custom page on the inside, but the outside shows the default.

Only reason i know this is we use the outside IP to connect to make our changes with dreamweaver and the page is different outside so we can't do it that way.

joie

I got a Q while we are at it. I have only one login.html on my MT and if I surf to 10.5.50.1/login.html I see the page I have customized but if I surf to outside ip/login.html I see the default page, where is this page coming from. I have deleted every copy of login.html I can find except my customi...

joie

What I wanted to do was have the remote users authenticate against a hotspot server here in my office then surf the net from the remote location. Say I am in town A and remote is in town B with a DSL line, well I want town B users to authenticate against the controller here, (MT at remote site sends...

joie

Is there a way to set up a central hotspot server but have it feed remote sites. I want the bandwidth and all the surfing to be through the internet connection at the remote sites but I want the hotspot logon and webpages to be on a central machine so that any time I make a change I make it once ins...

joie

Does that mean we no longer have to use mangle rules to fix the DNS/MTU problem on PPPoE connections?

joie

About 2 months ago I was testing using a MiniRouter as a PPPoE client and either on the forum or in the wiki there was an entry for fixing the MTU issue where certain websites wouldn't open but after searching for a while now I can't find the post anymore, and I seem to have misplaced the printout's...

joie

Andis, all are MT's in AP Bridge with static WDS

joie

Anyone?

joie

I have a miniRouter that has a bad ram chip on it so I saved the config to a file and now I am trying to load said config file on a new miniRouter and it fails to load with error "incorrect file size". The old board was 2.9.39 and the new board is 2.9.41, do I need to down grade or is ther...

joie

My configuration I am running a public hotspot and it is set up as so. miniRouter as hotspot controller Ether 4 & 5 in bridge1 and hotspot server bound to bridge1. Ether 4 connected to radio 1 Ether 5 connected to radio 2 Radio 2 static WDS to radio 3 SSID on all radios = hotspot Channel on all ...

joie

How much power are you running to the board and how far are you running the power line? If the power feed is a long run you may have to much loss and be ubnder powering the board which would cause the cards to disappear/reappear at random.

joie

How do I write config on MT?

joie

That didn't work. I still can't ping the address's and if I try to ping from the hot spot controller to the radio I get;

X.X.X.132 ping timeout #radio public IP
X.X.X.132 ping timeout #radio public IP
X.X.X.193 92 byte host unreachable (3:1) time=963 ms #hotspot public IP

joie

I'm new to MT gear so if this obvioud please forgive me. I have a 5 port MT minirouter running hotspot connected to 2 seperate radios with a single WLAN interface and there WLAN is bridged to there Ether which is connected to respective ports on the minirouter and all works well for the hotspot, how...

Search found 49 matches