In our office, we have a VOIP PBX. In my house i have a linksys PAP2 FXS adapter and a Cisco ATA 186, they work grey with calls betwen these devices, but calls from outside are giving me lot of troubles with sound. I am not sure, but thing is a mikrotik thing, of course some miss configuration of my...

Thanks everyone for the answers. I found the solution in another post of this forum: [url]http://forum.mikrotik.com/viewtopic.php?f=2&t=15122&hilit=MTU+Problems[/url] Only need is to add a mangle rule: add chain=forward protocol=tcp out-interface=cityconnect tcp-flags=syn action=change-mss n...

Hi everyone, i am running a new asdl line. i used to run a cablemodem connection that asign the public ip address directly to the mikrotik wan interface (eth3). The adsl modem is a cheap one that my isp gives to new clients, so i cant make port forwarding or things like that. I configure the device ...

MKT people, i am tryng to limit eMule trafic in a samall home enviroment. The best DSL line i can get is a 1024 kbps download and 128kbps upload. The eMule client in working really great whit 10kbps upload and 100kbps download, but the internet conection is going realy slow with this settings. I cre...

Hello, i configure VPN server for L2TP and IPSEC I receive 4 o 5 IPSec Warnings with: Incoming packet with unknown SPI and a info message with: ipsec no a found: proto=esp spi=4100391946 src=xx.xx.xx.xx dst=xx.xx.xx.xx Some times it conects and some time not, i only have to retry 2 or 3 times an the...

andrewluck, thanks a lot for the answer, it works ok with the /0 that was the mistake. Now i receive 4 o 5 IPSec Warnings - Incoming packet with unknown SPI and a info message with: ipsec no a found: proto=esp spi=4100391946 src=xx.xx.xx.xx dst=xx.xx.xx.xx Some times it conects and some time not, i ...

Thanks a lot for the answer, but i already try the "generate-policy=yes"
and works fine only if the peer has a known ip address.
I need to make IPSEC work for unknown address of remote peers.

Please, this is the third post i made over this subject, if anyone can please help me, i´ll be thanksfull. I need to configure L2TP/IPSEC to work whit remote clients, that are in different location and whit differen IP address. The IP adresses are unknown and can change at any time. I have try L2TP/...

There is any way to configure L2TP/IPSEC VPN from remote clients that are not static routers?, not a site to site VPN, just a remote client that has diferents ips depending on the location. I have it working fine for PPTP or L2TP with no IPSEC. There a lot of examples in the IPSEC manual and docs, b...

I´m new in the Mikrotik world. I recently configure the PPP server, no problems whit PPTP, and L2TP/IPSEC between a Mikrotik and a remote client (windows XP machine) with statics IP in the client. Then i try to configure the L2TP client behind nat with dynamic IP (ADSL line) but i can´t make it work...