Search found 33 matches
- Sat Nov 09, 2024 4:39 pm
- Forum: General
- Topic: DNS Cache issue
- Replies: 3
- Views: 516
Re: DNS Cache issue
Drvices are configured to use DHCP from Mikrotik , so I've configured DHCP Server on Mikrotik to provide DNS IP of Adguard.
- Sat Nov 09, 2024 4:31 pm
- Forum: General
- Topic: DNS Cache issue
- Replies: 3
- Views: 516
DNS Cache issue
Hi there
i have an issue using DNS , Cache still has activities even i unchecked "Allow Remote Access", i'm using Adguard DNS on Ubntu Server and configure its IP on Mikrotik DNS , it's working but why there are activities on Mikrotik DNS Cache?
i have an issue using DNS , Cache still has activities even i unchecked "Allow Remote Access", i'm using Adguard DNS on Ubntu Server and configure its IP on Mikrotik DNS , it's working but why there are activities on Mikrotik DNS Cache?
- Sun Jul 14, 2024 6:16 pm
- Forum: General
- Topic: High CPU Utilization
- Replies: 0
- Views: 1117
High CPU Utilization
Hello I have RB1100AHx4 configured for distribution of internet by vouchers using USERMAN ,last week i noticed high cpu utilization by firewall up to 25%, before that the cpu utilization doesn't exceed 7% , i tried to remove all firewall rules but still high cpu . note: Active users approximately 70...
- Thu Apr 11, 2024 4:38 pm
- Forum: The User Manager
- Topic: how to display remaining Giga inside Status html page
- Replies: 0
- Views: 2342
how to display remaining Giga inside Status html page
Hi all Recently i moved to using CCR2116 16G . i have small hotspot wifi login page so users can use internet by entering username and password, after a successfull login will transfered to status page that contains details about remainig bytes, remainig days and so on . in UM V6 it displayed easily...
- Thu Jun 29, 2023 8:51 pm
- Forum: General
- Topic: accessing devices behind NAT
- Replies: 5
- Views: 606
Re: accessing devices behind NAT
like what?Sounds like a mistake on your config..........
- Thu Jun 29, 2023 7:05 pm
- Forum: General
- Topic: accessing devices behind NAT
- Replies: 5
- Views: 606
accessing devices behind NAT
i have the following archetcture of my small office network
i can access Mikrotik RB2011 through its Cloud DDNS ,but i can't access web interface of the access point even i've opened port in ZTE router and making port forwarding on Mikrotik RB .
i can access Mikrotik RB2011 through its Cloud DDNS ,but i can't access web interface of the access point even i've opened port in ZTE router and making port forwarding on Mikrotik RB .
- Fri Jun 02, 2023 2:39 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
this one? https://www.zte.com.cn/global/products/access/Smarthome/ONT/ZXHN-F660.html [*] No Just range , i changed ONT Default ip to that range . MT DHCP is 10.0.1.11-10.0.1.20 [*] ok. do you know your zte ont default ip? (just in case you need to hard reset to factory settings) disclaimer : you wi...
- Thu Jun 01, 2023 8:41 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
doneCan, please, the original author of this topic @Aymen1986 change the title of the topic (editing first post) from Accessing internet without NAT?
to more adequate
How to remove one or more NAT layers from my internal network?
Thanks...
- Thu Jun 01, 2023 8:06 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
this one? https://www.zte.com.cn/global/products/access/Smarthome/ONT/ZXHN-F660.html [*] No Just range , i changed ONT Default ip to that range . MT DHCP is 10.0.1.11-10.0.1.20 [*] ok. do you know your zte ont default ip? (just in case you need to hard reset to factory settings) disclaimer : you wi...
- Thu Jun 01, 2023 7:45 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
No Just range , i changed ONT Default ip to that range .
it seems that your ont connected to MT lan port? 192.168.88.0/24 is MT default DHCP subnet.
MT DHCP is 10.0.1.11-10.0.1.20
- Thu Jun 01, 2023 7:43 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
hello aymen1986, [*] Yes i can do a Bridge mode on ONT [*] are you sure? what/which type is your ont box? we don't have any ideas. before you change any config in it - make sure you write down all the config ie. user name, password, isp account id, channel id, protocols for your internet link (pppo...
- Thu Jun 01, 2023 7:15 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
probably the OP just wanted to know whether he/she can do bridge mode on the isp supplied ont box to the MT router, so that OP can have many MT features for his/her network - that is why the OP asked how to not doing double NAT. happened occasionally because the subscribers think isp supplied modem...
- Thu Jun 01, 2023 7:05 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
My Network is configured as shown:
- Thu Jun 01, 2023 1:50 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
RB2011 is necessary to control the bandwidth,login, .....Easy fix, remove the ancient rb2011 from the picture and allow your users to use the internet.
Or configure it as a switch if you need a fancy switch.
- Thu Jun 01, 2023 12:21 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
Three choices: 1. Reconfigured ONT/router - e.g. directly connect Mikrotik to the ONT, or if ONT+router is integrated look for some "passthrough" mode 2. Setup the Mikrotik as a bridge & just use the ISP's router for NAT 3. Use a NAT "netmap" to map your Miktrotik IP /24 ran...
- Thu Jun 01, 2023 12:07 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
Three choices: 1. Reconfigured ONT/router - e.g. directly connect Mikrotik to the ONT, or if ONT+router is integrated look for some "passthrough" mode 2. Setup the Mikrotik as a bridge & just use the ISP's router for NAT 3. Use a NAT "netmap" to map your Miktrotik IP /24 ran...
- Wed May 31, 2023 7:23 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
Re: Accessing internet without NAT?
@Aymen1986 It seems you don't understand the purpose of NAT or the difference between private and public ip addresses. Watch this layman's guide to NAT. How Network Address Translation Works by PieterExplainsTech (a 2012 video, but still one of the best layman's explanation I am aware of). i mean ,...
- Mon May 29, 2023 7:52 pm
- Forum: General
- Topic: How to remove one or more NAT layers from my internal network?
- Replies: 31
- Views: 2564
How to remove one or more NAT layers from my internal network?
I have RB2011 connected through wan port to ONT , and users can access the internet using NAT , so can i allow users accessing internet without using NAT
- Mon Oct 10, 2022 10:19 pm
- Forum: General
- Topic: Preventing ISP getting amount of used data
- Replies: 3
- Views: 495
Preventing ISP getting amount of used data
Hi all
I use RB1100 to resell Fiber internet using hotspot , is there any way to prevent my ISP from getting known the amount of bandwidth used ؟
I use RB1100 to resell Fiber internet using hotspot , is there any way to prevent my ISP from getting known the amount of bandwidth used ؟
- Tue Oct 04, 2022 6:07 pm
- Forum: The User Manager
- Topic: Edit collection of created vouchers
- Replies: 0
- Views: 3492
Edit collection of created vouchers
i want to edit a collection users created using wrong profile limitation
for example i want to edit users that begin with 512xxxx
can you post a script ?
for example i want to edit users that begin with 512xxxx
can you post a script ?
- Mon Oct 03, 2022 2:57 pm
- Forum: General
- Topic: DNS Unknown Type [SOLVED]
- Replies: 4
- Views: 1727
Re: DNS Unknown Type [SOLVED]
No answer?
- Sat Oct 01, 2022 2:39 pm
- Forum: General
- Topic: DNS Unknown Type [SOLVED]
- Replies: 4
- Views: 1727
Re: DNS Unknown Type [SOLVED]
I userd RB1100 as hotspot for providing internet to clients across NanoStation M2 access points ,
- Sat Oct 01, 2022 2:37 pm
- Forum: General
- Topic: DNS Unknown Type [SOLVED]
- Replies: 4
- Views: 1727
Re: DNS Unknown Type [SOLVED]
No sir i didn't put any asterisks .and there's no(thanks for specifying whether or not you put the asterisks,
- Fri Sep 30, 2022 3:01 pm
- Forum: General
- Topic: DNS Unknown Type [SOLVED]
- Replies: 4
- Views: 1727
DNS Unknown Type [SOLVED]
Hi there
I found unknown DNS names on RB2011 cache as show below
can any one explain is that an issue or what?
I found unknown DNS names on RB2011 cache as show below
can any one explain is that an issue or what?
- Sat Sep 24, 2022 7:11 pm
- Forum: General
- Topic: CPU Load -Management
- Replies: 1
- Views: 394
CPU Load -Management
Hi there
I have RB2011 and i noticed that there's cpu load about 20%, i use this router as hotspot for about 12 employees ,i used a Profile tool tool and found load on Management as show on attached pic , so how can i reduce that load ?
I have RB2011 and i noticed that there's cpu load about 20%, i use this router as hotspot for about 12 employees ,i used a Profile tool tool and found load on Management as show on attached pic , so how can i reduce that load ?
- Sun Mar 27, 2022 2:55 pm
- Forum: General
- Topic: Double NAT Load balance [issue]
- Replies: 1
- Views: 439
Double NAT Load balance [issue]
Hello there i hope you have a good work day I have an issue in making load balance with one ADSL line and other LTE , both of lines are Double NAT from ISP (ISP provides me with ip start wit 10.101.....) so when i apply NTH or PCC methods on RB951 , i can only get a maximum of 8M of both lines (Norm...
- Tue Jan 04, 2022 1:51 pm
- Forum: The User Manager
- Topic: Adding users using script
- Replies: 10
- Views: 10871
Adding users using script
Hey there ..
I would like to ask a help in create users in USERMAN with profile using script
i tried a script but without adding profile limit to users
/tool userman user add username=test password=111 customer=admin
I would like to ask a help in create users in USERMAN with profile using script
i tried a script but without adding profile limit to users
/tool userman user add username=test password=111 customer=admin
- Sat Nov 27, 2021 7:27 pm
- Forum: Wireless Networking
- Topic: Issue in static IP addresses of Antennas
- Replies: 8
- Views: 3897
Re: Issue in static IP addresses of Antennas
They are configured with static IP through their interfaceAre they configured with Static IP through their interface or a Static Lease from the MikroTik side ?
- Sat Nov 27, 2021 2:00 pm
- Forum: Wireless Networking
- Topic: Issue in static IP addresses of Antennas
- Replies: 8
- Views: 3897
Re: Issue in static IP addresses of Antennas
I can't believe no one has the answer
- Fri Nov 26, 2021 1:52 pm
- Forum: Wireless Networking
- Topic: Issue in static IP addresses of Antennas
- Replies: 8
- Views: 3897
Issue in static IP addresses of Antennas
Hello guys I have RB2011 and it's configured to distribute internet for users across Nanostations M2 , Nanostations are configured to have a static ip address, every thing is ok since long time, yesterday i couldn't access Nanostations to change some of settings, When i looked at host menu i saw dif...
- Sat Jun 19, 2021 3:27 pm
- Forum: General
- Topic: Adding Users in Userman
- Replies: 0
- Views: 694
Adding Users in Userman
Hey there
I have an issue , when i create 900 users in userman , only less than 900 users are created (eg 800, 755,.....)
I deleted all sessions and logs, also i stopped all servers when i created users
I have an issue , when i create 900 users in userman , only less than 900 users are created (eg 800, 755,.....)
I deleted all sessions and logs, also i stopped all servers when i created users
- Sun Jul 15, 2018 4:41 pm
- Forum: Beginner Basics
- Topic: Access from another subnet
- Replies: 2
- Views: 802
Re: Access from another subnet
No answers ????
- Thu Jul 12, 2018 5:26 pm
- Forum: Beginner Basics
- Topic: Access from another subnet
- Replies: 2
- Views: 802
Access from another subnet
Hi guys
I need to access NanoStation M2 AP from Linksys subnet 192.168.1.0/24 as shown below
I need to access NanoStation M2 AP from Linksys subnet 192.168.1.0/24 as shown below