Thanks so very much. I haven't any question about this.

I will close this topic.

Regards

Ok, thanks so much!!
Well, for me that isn't a bad notice, It's means that is fine (there isn't bug or problem with devices).

If I want to get 300mbps or higher, I maybe need to use an adapter 5ghz usb BUT with single band NOT dual band.

Is that correct?

Hm. The 7265 card is two-chain on both frequencies, but while the RB is two-chain on 2.4, only single-chain on 5.0. So sounds like you're stuck on a single-width channel right now, but should be able to bump up to double-width to get around 300. (Or quad-width for 433 but that's harder.) Please pos...

Hi guys, I bought this hap lite https://mikrotik.com/product/RB952Ui-5ac2nD-TC. I have a ultrabook Asus UX303LB https://www.asus.com/Laptops/ASUS-ZenBook-UX303LB/specifications/ The wireless adapter of this laptop is "Intel(R) Dual Band Wireless-N 7265" https://ark.intel.com/content/www/es...

so, if I understood good, I should be it:
Parent max-limit 5M
children1 limit-at 2.4M max-limit 5M
children2 limit-at 2.4M max-limit 5M

It's okey?

Hi, I 'm confuse with limit-at and max-limit. For example, if I have got a parent download with max-limit 5M and two children queue, both with max-limit 5M. It's okey? Or maybe it should be max-limit 2.5M for both? I read that the sum of all the max-limit of thechildren queues should not be greater ...

Hi, I have got a hAP Lite, it's my main router, works as AP. But I want to extend my are of wifi. I want to put other mikrotik in other house (in front of my house). I think this is 20 or 30 mts long. So wich mikrotik is good for do this? Other hAP Lite or cAP Lite? The connection will in repeate/br...

Well, I tried with different firmware, ie gargoyle, open-wrt and dd-wrt. But none has worked. So I think the unique way is try with other mikrotik.

Hi, I'm searching some option in hap lite to watch the bandwidth traffic of each devices connected to hap lite. But I don't match any option for watch traffic of bandwidth.

So is there or are there any option for do that?

Regards

Yes, I saw, mikrotik sends for each request. Now I changed the firmware of tp-link to gargoyle firmware, and again I tried to configure in repeater or bridge mode but the problem is same. So, if the problem appears with different tp-link (701nd and 743nd) and different firmware (factory default and ...

Sorry for delay. The connection between Mikrotik and tp-link is via wireless. With wired it works fine, the problem is only with wlan interface. I said, my mikrotik has eth2, eth3, eth4 and wlan in bridge. I readed in other posts, a solution is leave without bridge wlan. So now I have bridge from et...

Hi, I have got an hAP Lite, eth2, eth3, eth4 and wlan are in bridge mode, it works fine, but the problem is with tp-link repeater. When I power on the tp-link, obtains an ip from mikrotik dhcp server, but when I try connect to tp-link, my smartphone still "obtaining ip". At dhcp server -> ...

Did I see correctly that latency went up at beginning of DL speed test while at UL speed test it remained constant (with a single ping timing out)? You have to keep in mind that prioritization can be done on transmitting side of a bottleneck. If your WAN link is a bottleneck, then for UL it's your ...

Hello, I am trying to configure the packet marking and the queue tree to prioritize these packages: 1) ICMP 2) Leauge of legends 3) Other This is how I have configured in mangle: Flags: X - disabled, I - invalid, D - dynamic 0 ;;; ICMP chain=prerouting action=mark-connection new-connection-mark=ICMP...

Current product page specifies 5V 1A power adapter as included part. Could be that this had been changed in the past. Or that you were unlucky to get false power adapter when purchasing your hAP lite. It's bad. Because the power supply is 5V 0.7A. I had unlucky to get false power adapter when I bou...

Faulty / weak power supply? Hi, I changed the power supply of the mikrotik, the original power supply is 5V 0.7A. The new power supply is now 5V 1A. So far mikrotik does not restart. So I think, wlan consumes more A and the original charger can not provide that A so V goes down and then the mikroti...

Hi, guys. Hi have got Hap Lite RouterBOARD 941-2nD. My problem is when I try to connect any device to wlan, the router restarts. This the information of the router: Firmware type: qca9531L Factory firmware: 3.39 Current firmware: 6.42.6 Upgrade firmware: 6.42.6 So, I don't understand what is the pro...

200ms, it's sad.

I visited this page
https://bgp.he.net/AS6507

And I don't understand what is the ASN of Riot. Is it AS6507?

Hi, I'm new to this, I'm looking at tutorials on YouTube, reading forums, looking at guides. However, I think something is not going well. What I want to do is prioritize the traffic of a game (league of legends) and leave the rest of the traffic in low priority ie: 1_ league of legends traffic 2_ o...