But the issue that you do not get the internet is your masquerade rule. It is set to Out-Interface-List=WAN, but you have a DHCP client set on ether1, but you do not have ether1 under WAN interface list. But there is an entry alright :? : /interface list member add comment=vejaconf interface=bridge...

Hi! You have only one functioning DHCP server, and that is on the bridge. So, you will get the IPs on every port from 2-10 and also wifi 2G and 5G. But the issue that you do not get the internet is your masquerade rule. It is set to Out-Interface-List=WAN, but you have a DHCP client set on ether1, b...

I would not recommend to upgrade after 7.13.

I have had two of the hap Ac2s and none of them booted back. Both on remote location.

I recommend to staj with v6 on hap Ac2!

Does DHCP assign IPs if they are not staticaly set on RB4011?

What about if you set static IP on those remote Mikrotiks, and use the free range IP, instead of DHCP range?

Great topic!

I wonder if it is possible to run Mikrotik behind another (Draytek NAT). Mikrotik ETH1 has an IP of 192.168.0.210, where all interfaces are as bridge. Is it possible to create a connection to such a device, or it is better that Mikrotik has its own subnet?

Hello @erkexzcx

I'm looking for a VPN for my iPhone to my Mikrotik?

See over here: https://www.bgocloud.com/knowledgebase/ ... cbook.html

Did find a solution. In most cases the Windows 10 firewall is somehow blocking the connections, if the connection on other devices works.

Topci Author, did you find a solution?

Well I believe this can be accomplished fairly easily via IP routes. After the two standard IP routes are created..... 1. Ensure WAN1 has a shorter distance so that will always be the preferred routing for all LAN traffic in general. 2. To force specific traffic to WAN2, a. create another/second IP...

Hi all! I am facing a new challange, if I may say so, with Mikrotik at new job. The situatuion is: I have to configure a mikrotik device with 2 WANs - On the WAN1 (eth1), there is a PPPoe connection with static IP, on WAN2 (eth2) there is an DHCP requested IP (client). My mission is that computers t...

Thank you! Will give it a shot and report back!

mkx, thanks a lot! I have been studying VLANs, and I am still considering myself a beginner with VLANs. However I am learning on examples and study them, it does really make me more productive and overall it makes me more interesant into the problem. I am not saying you shuld type the syntax code fo...

Hi guys! After few years learning ROS I am facing a task that I am unable to realize. I am fairly new with VLANs. So basicaly the work is something like: Server with trunk signal with VLAN 22 and VLAN 32 connected with one cable to Mikrotik (Hex lite) Eth1 - then, this is the part that I do not unde...

Yes, it will be. You need minimum one L4 and multiple L3 for PTmP and minumum two L3 for PTP.

Thank you all! Those are fantastic answers. I did never consider to use RGBPOE injector to power a router.

Hi all!


That I do not open new thread, what PoE adapter will be suitable to power RB4011? It says it needs 23W constant and it could take up to 44W.

Thank you all!

I have tried 3 things, however I am not a ble to resolve which did work. 1. Increase the DHCP Lease time, I did it to 24 hours 2. Don't use default Security profile. Create a new one, and address it in every wireless interface! 3. My iPhone and iPad were on version 13. something, when I updated it t...

Adding the display of local IP in the server page would be appreciated. Also this tool can be run without Mikrotik HW or?

What should I have in DNS - Static Nothing if you use https://1.1.1.1/dns-query as DoH Server. Or /ip dns static add address=1.1.1.1 name=cloudflare-dns.com if you use https://cloudflare-dns.com/dns-query what should I have DHCP Server - Networks - DNS Servers? Your router's IP Also make sure, that...

For those who have DoH configured with CloudFlare, does first test ""Secure DNS" shows to you as a green? https://www.cloudflare.com/ssl/encrypted-sni/ Thanks Yes. Have problem with that, I followed the nromis manuals, and I am unable to get First test green. Any recommendations? Wha...

For those who have DoH configured with CloudFlare, does first test ""Secure DNS" shows to you as a green?

https://www.cloudflare.com/ssl/encrypted-sni/

Thanks

Thank you!

I decided to go with powered hAP ac with power jack and to PoE adapter 0.8A 24V to power SXT + SXT LTE Kit.

I will try and report if this works!

Thank you

As the title says, I would like to power two SXTs with PoE ETH5 port on hAP ac. I will connect ETH5 on hAP ac directly to SXT LTE Kit, and then in line from PoE out on SXT LTE Kit to SXT2. The power adapter which powers hAP ac is original 24V 1.2A. Will this adapter power all three devices? Addition...