Hello, before 6.32 the above command was ok: queue simple set max-limit=10011k/10011k limit-at=10011k/10011k burst-limit=0k/0k burst-threshold=0k/0k burst-time=0/0 priority=5/5 numbers=<pppoe-mike> Now I get this error: failure: cannot change dynamic The "queue simple set" command was a wa...

Hello! Please, need some help: I have this rule in mangle: /ip firewall mangle add action=log chain=prerouting connection-state=new disabled=no log-prefix=ACCESS-LOG And in Logging: /system logging set 0 action=memory disabled=no prefix="" topics=info set 1 action=memory disabled=no prefix...

Hi! I´m trying to develop an API to detect and disconnect duplicated radacct entries in freeradius. With pppoe connections I do: "/ppp active print detail" and search for "session-id". I tried "/ip hotspot active print detail", but did not show "session-id". H...

I need to make by API or SNMP ok?

Thanks for your reply!

Hello. I need some help. I have PPPoE and Hotspot users. To get PPPoE user´s traffic I use: /interface monitor-traffic <pppoe-user1> The answer for this command is: name: <pppoe-user1> rx-packets-per-second: 0 rx-drops-per-second: 0 rx-errors-per-second: 0 rx-bits-per-second: 379.5kbps tx-packets-pe...

Thanks for your reply! I´ll try, in that order: - increase keepalive timeout (today is 10 secs). - increase keepalive timeout and mark one session per host. - decrease keepalive timeout to zero and mark one session per host. If one of these solves my problems I´ll post here. I kept keepalive timeout...

Hi! I have this strange problem. I have a RB493G with some PPPoE clients with FreeRadius. I was looking in PPP > Active Connections tab when I saw that one user had 3 connections with same Session ID, IP and Uptime! Then I changed to PPP > Interface and there was only one interface with this pppoe-u...

Yes: I want to Edit login.html and put an advice for certain users. These users will see the notice, click “next” and HTML will POST username and password. My login page: “Please PAY” [Click Here to Continue] <input type="hidden" name="username" value="hsuser"> <input t...

Hello. Need some help! After doing a lots of searchs I did not find a solution for this question: The scenario: USER <--> RB 1 <--> INTERNET RB1: Ether1 – Internet Ether2 – Users – PPPoE – This interface has no IP, just PPPoE server. Is it possible to install Hotspot in RB1 for PPPoE users? In other...

Thanks Fewi! I'll try to make it work here!!

Regards

Fabricio

Hello. Need some help! After doing a lots os searchs I did not find a solution for this question: The scenario: USER <--> RB 1 <--> RB 2 <--> INTERNET RB1 = PPPoE server with Radius RB2 = HotSpot Is it possible to MARK packages from USER into RB1 and these maked packages be bypassed into RB2´s HotSp...

Massimo! Thanks for your help! I will try!


C ya
Fabricio

Hello! After searching for a solution without success, I would love help from someone in the Mikrotik community. I could not find the OID to capture TX and RX Rate for a given interface (ether1, ether2, etc.). I found how to capture the octets, bytes-in, bytes-out, etc. .. But really have not found ...

Hello!

I have this same problem... Did you solve it?

Thanks!

Hello ! I have a doubt about priority in the queue trees in the example below: 1)In the mangle table I set up all packets that have port 22 as destination with “PORT22” mark 2)Then I go to queue tree to add a rule that all packets with “PORT22” mark will have priority 2 This is the only queue tree r...

Hi! Need some help! - I don´t use HotSpot or PPPoE. I just use IPxMAC to give access to the machines inside my backboone with NAT. - I use MK 2.9.49 If I use the following rules: / ip firewall nat add chain=dstnat action=dst-nat to-addresses=200.98.249.120 to-ports=80 \ src-address=10.0.0.248 dst-ad...