CRS3xx series switches are using L2+L3+L4 as transmit hash policy globally, regardless what you select on the CRS3xx side. https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Bonding Note: The built-in switch chip will always use Layer2+Layer3+Layer4 for transmit hash policy, changing the ...

CRS3xx series switches are using L2+L3+L4 as transmit hash policy globally, regardless what you select on the CRS3xx side. https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Bonding Note: The built-in switch chip will always use Layer2+Layer3+Layer4 for transmit hash policy, changing the ...

I had to replace a TPlink TL-SG3424 so I got the CRS326 and CSS326. I have two servers HP DL380 gen6 with 4 nics running PROXMOX 5.2-6 . CPU 2x 4C8T and 24GB RAM and a NAS with 4 nics too. I tested throughput with this iPerf build https://github.com/Aquantia/iperf for FullDuplex support, also iperf3...

Yep, as per https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features , the CRS3xx is the only switch/router to maintain HW offload on the bridge when configuring VLAN filtering on the bridge. You would configure the CRS326 using VLAN filtering on the bridge, but for the RB3011, if you want VLAN s...

I just bought a switch: CRS326-24G-2S+RM (rOS 6.38). And then it had the infamous "switch" with VLANs options as the RB3011. But upgrade it to 6.43rc51 to get rid of the "master port". And then... There's no longer VLAN and port config on Switch TAB RB3011 rOS 6.43.rc51 /interfac...

I'm trying to make little steps around switch chip. Using just 1 switch chip. I created two bridges with PVID 100 and 200 I'm using ether3 : untagged for VLAN100 tagged for VLAN 200 /interface ethernet switch port set 0 default-vlan-id=0 vlan-mode=check set 2 default-vlan-id=100 vlan-mode=secure set...

I'm new to RouterOS, to test dedicated HW after using CHR I bought a RB3011. I'm confused about the best way to handle this setup and the use of the two QCA 8337 switch chips. I want to route 4 VLANS with internet access and some firewall rules, VPN... uplinked to a managed switch. First thing that ...