Hi, I need help with vlan setup. Need: any device that is configured with vlan 20 should get dhcp from vlan 20 when connected to any port on the switch. Hardware: Mikrotik Edge router>> Traffic shaper Mikrotik>>Mikrotik Switch>Netgear Switch>>netgear switch I am not sure if i should create vlan 20 o...

Thanks

Thanks Massinia for releaving the stress.

I will leave this open till the testing is completed

Thanks for the replies. Going throug the docs, testing is pending.

Since WiFiWave2 and CapsMan CAPS can be managed seperately by the same device, will WiFi clients have roaming? (auto channels)

Hi, 1. Trying to put hAP ax2 into caps mode but it would not go in. 2. Upgraded to stable 7.8 and it lost Wireless interfaces with Critical Error script interupped 3. Installed other packages but wireless interfaces not coming back. 4. Not to mension default passwords that were put in caused some ba...

Hi Anav, Thanks for reply. I was able to get it all going and all is good now, however, interestingly access to local lan started to break. Research revealed, limiting the tunned traffic by AllowedIPs was set in the server as well as in client, it should be only setup in the client/peer. Link for th...

Thank you Larsa, Great Links, many common issues are explained in both of them. Maybe I will create a sort of checklist for WireGuard setup that will provide an easy guide for local lan access to a starter. I was able to get access to local devices by changing AllowedIPs, remove 0.0.0.0/0 and add th...

Hi, WireGuard works and is easy enough to setup upto the connection point; however, giving a peer access to NAS data or a shared drive mapping is not streight forward. Please help me to figure out a standard procedure for this purpose. Issue: Cannot access main lan device for the purpose of mapping ...

Thank you both again for reply.
I will have to test run changing bridge's MAC, as per caution by Tangent, DHCP reservation can get messed up.

Thank You MKX for clarifying.

Thank you Tangent for important caution.

Combining both replies above, is it best to change MAC of port 2 rather? Assuming Bridge accepts a MAC, that is unique.

Hi,
Just trying to setup Lag on port 2 and 3 on latest HexS. But removing port 2 from bridge seems to be trickey and brings down network. Please guide and help. Thank You.

This is not leakage, if both the device can reach the google cloud, both can interact, you like this or not. For Google they are connected to same Public IP and same Router... I see what you mean, but Google home cannot control smart devices if not connected to the same Lan. example: when phone is ...

The problem is not the data, google app see the same public IP, the same router and act accordingly... I am not sure what you are saying in technical terms. Are you saying that google data is/should be able to pass through with exception. When I secure a device/Lan/WiFi, I need to be able to say th...

Hi, I have discovered that isolated Guest WiFi in CapsMan lets through google home data, example: i can connect to guest wifi and managed google home that is connected to main WiFi. Although other data does get blocked, it is bothering me. Setup facts are below: -Guest WiFi is on seperate Bridge -Gu...

Aplogies for the Delay.

DNS works in most edge systems and couple systems has this issue. However, due to my plate being full, I will put if off for now.

I am sure, one day, in a critical scenario, this will bite me in the butt.

How many VPN clients can connect to hEX simultaneously, bandwidth not being a factor? Situation: Currently Asus router is being used with Open VPN and 10 edge users with laptops connect. We are implementing advanced firewall with hEX and wondering if hEX can match this either by Open VPN or its buil...

Thank You SOB.

Once dual wan worked, I quickly realized that I needed load balancing and not fail over, which brought me back to your provided links WITHIN 30min.

Thank you for the reply. Ingdaka, you are good. You made it very simple and easy. Picture of Default really helped. Thank You very much. Tips for those who find it useful. Remove port to be used as 2nd WAN from the bridge by going to bridge/port and remove. If WAN 1 is already setup then create 2nd ...

I searched but cannot find help to Setup:
Dual Wan, both are DHCP by ISP

1 is setup with quick setup on port 1
2nd needs to be on port 5, last port on hEX

Thank you for the help

Thanks for the reply, I will check and let you know.

Sorry, I was away. Following is all in the firewall rules. Recap: Cannot RDP by name or map drives by names. UNC address, when typed to map a drive are now jumping to a browser and going out to the internet (this is a new behaviour). Ping is now working, not sure how it got fixed. Please note: there...

New Setup has dns issue. issue: cannot ping on lan but can ping out to google cannot rdp by name on lan but can rdp by ip address cannot map network drive by name but can map by ip address setting: new router/ keep default config / i input firewall rules: allow all from Lan and deny from wan forward...

Create the necessary Vlan's and assign these to ether4 on MT Assign IP's to these Vlan's and if required, create DHCP on these Vlan's On Windows / Hyper-V side, you will need to create trunking and that can only be done in Powershell, not via VM Manager, just Google it and you will find process to ...

Create the necessary Vlan's and assign these to ether4 on MT Assign IP's to these Vlan's and if required, create DHCP on these Vlan's On Windows / Hyper-V side, you will need to create trunking and that can only be done in Powershell, not via VM Manager, just Google it and you will find process to ...

Thanks for the reply. Router is hex. Router will act as the gateway. VMs communication gets VLan tagging as needed by VM manager.

I need VLan help please: On a windows server, I have VMs running. server is connected through 1 network cable going to the router. Some VM's traffic need to be on their own VLans and get ip on their seperate subnet. Example: Ethernet 4 Vlan 3 : Lan 192.168.3.0/24 Gateway: 192.168.3.254 Vlan 4 : Lan ...