Same, my openvpn server TCP broken, cannot connect to. After i downgrade 7.1.5 works fine. Same for me :-( Same problem with a RB750g3 after upgrading from 7.1.5 to 7.2. On my RB951Ui-2HnD OpenVPN still works with 7.2. For a test I upgraded a Hap lite with 7.2, OpenVPN also works. Maybe a problem w...

Update: disable/enable Ipv6 under settings solves the problem (temp workaround?). The bridge gets a link local address and advertising works

viewtopic.php?t=177478#p907455

Radv was working fine on interface bridge, but after routeros upgrade, clients doesn't get a IPv6 address.

I enabled debug for radv and see this message: skip Router Advertisement sending on bridge: no link local address
I checked the IPv6 addresses, fe80:xx for bridge is missing?

I have FreeNAS with a CRS309 and 2x ports in LACP. Both ports on the CRS309 are set on Active. If one link goes down, LACP stops working and the network disconnects

Update: The E3372 works with a USB 2.0 powered hub, no problems with losing connections

Both USB hub where non-powered. I ordered a USB powered hub, will let you know if it works.

Update: also tested with a USB 2.0 hub, lte1 interface stays up. But with downloading files the connection drops. Only way to get E3372 working again is USB power reset. I think the E3372 needs more power then the Mikrotik can deliver?

I have a Huawei E3372h-153 attached on a RB2011UiAS-2Hnd in HiLink mode. The router gets an IP address from interface lte1. Problem is that the lte1 link goes up and down repeatedly. The lte1 interface also disappears. I placed an old USB 1.1 hub between and the lte1 link stays up. Can it be a USB p...

There is no local address or subnet possible for routing it. Is there no alternate solution like proxy macaddress or something? If I give a server on the WAN side with IP address 2a02:123:ff::1/64 and gateway 2a02:123:5::1 it just works. The same I want it at the LAN side. Or something like bridging...

My colo provider provides a IPv6 /48 subnet and I want to get IPv6 behind the Mikrotik. Colo Subnet 2a02:123:5/48 Gateway Colo: 2a02:123:5::1 My setup: WAN Mikrotik: 2a02:123:5::a:1/64 Default gateway: Gateway colo LAN: Mikrotik: 2a02:123:5:ff::1/64 Client on LAN: 2a02:123:5:ff::2/64 Client has as d...