MikroTik

Akangage

I received the update from MikroTik support, that KNOT is using BG77 modem, here the cap the link he share it's not right, you should check https://help.mikrotik.com/docs/display/ROS/LTE and https://help.mikrotik.com/docs/display/UM/BG77+modem+AT+commands https://i.ibb.co/gJ6Bb45/mik1.png Case closed.

Akangage

Downgrade to V6...
Is the interface back ?

You can always contact MikroTIK support... https://mikrotik.com/support

Unfortunately no ahahahahaha dead end, I've sent the ticket to mikrotik support, let see what they need from me, I hope it's only software issue.

Akangage

I would first give netinstall a try...
https://help.mikrotik.com/docs/display/ROS/Netinstall

Netinstall doesn't resolved my problem.
LTE Interface still unavailable.

I'm stuck!

Akangage

I would first give netinstall a try...
https://help.mikrotik.com/docs/display/ROS/Netinstall

OK, Will do

Akangage

Upgraded to 7.2.1 with 3x rebooted, no luck, my LTE still undetected, should I downgrade to version 6 again?

Akangage

As i can see you have 7.1.5.. but the router shows firmware 7.2 So at some point you did upgraded the ROS and firmware to 7.2, then for some reason your downgraded to 7.1.5 and you left the firmware version as it was... I am missing details on why you downgraded, because the LTE was missing ? Perso...

Akangage

Hi All,

Does anyone know, why my KNOT after upgraded to version 7.2 the LTE Interface is missing? anyone face similar problem with me?

Thank You.

Akangage

Is there someone who can tell more about this feature? 1 building, 5 AP's everywhere in the building. I must place the in a group? so they know from eachother there are more AP's from the same network? OR is loadbalancing: 1 building, 5ap's near eachother. The 5 AP's have all the same WiFi distance...

Akangage

All of dyndns script broken since 6.25 anyone have the update one?

Ah... it solved, the problem laid in "Dyndns updater client key", I need to generate new key. Its worked now.

Akangage

At last it run well in my network :lol: version 6.13 is bet version for running VLAN. If you are using apple gadget, disable the multicast (default is on) for running youtube video smoothly. If you want to use radius (external) as auth, just enable the "Mac Address" & "Mac Mask&qu...

Akangage

Where is "interworking" menu? is it has 802.11u, hotspot2.0 setup menu? or not ready? or no need to exist? I'm also looking that menu, in screenshot available but the fact was missing ?? Amazing :lol: Currently available features are listed in the manual: http://wiki.mikrotik.com/wiki/Man...

Akangage

Where is "interworking" menu?

is it has 802.11u, hotspot2.0 setup menu?

or not ready? or no need to exist?

I'm also looking that menu, in screenshot available but the fact was missing ?? Amazing

Akangage

I don't know about u all sorry for been skeptic, Ive been hire for some time and really enjoy MT innovation and work But this CAPsMAN future (I love the idea) but I don't really get it - centralization of wireless network management in big enterprise network will not make things more simple Somehow...

Akangage

Try freeradius as backend and as GUI you can try daloradius its nice I'm using it for my office as wireless auth eap-peap, mac auth also hotspot for guest

Akangage

Have you try in different web browser? have you try to clear cache on your browser?

Akangage

Is it possible to make some kind of access point groups? For example, if I run 10 access points I would like to run hotspot ssid on first 4, office ssid on last 3 and staff ssid on all of them. I cant seem to find a way to do this with CAPsMAN. JF. AFAIK, In Motorola Wireless Controller RF series a...

Akangage

I have setup three APs in a CAPsMAN/CAPs test configuration How does one disable the 'default authenticate' in order to apply the access list ? Unfortunately comments in Access list aren't preserved Based on email I received from mikrotik support, he didn't mention that. He only mentioned that it'l...

Akangage

Apple devices have had issues with mikrotik hotspots to

Yeah, I'm experienced also. My Iphone 4S using IOS 7.0.6 become unstable for wireless connection.
Playing video on youtube also makes wireless connection drop.

Akangage

Is it the caps able to run multiple VLAN dan VAP ?

Akangage

try to change the NAT masquerade using out-interface, UserMan will sent "Radius not Responding" if NAT using IP Address

Akangage

I've problem on Userman 4.2 when i use "user batch" feature on user, the "actual profile" on created user doesn't appears, but when i added the user one by one, the actual profile on created user appears, is it something wrong with my configuration on profiling or is it from the ...

Akangage

as far as I remember, simple queues do not work with XEN (only on real machine, not virtual?) hmmm..... i see, there was no information @ wiki or mikrotik manual so i thought it is a bug http://www.ocean-leecher.net/forum/images/smilies/kaskus/hammer.gif simple queue didn't worked in real machine, ...

Akangage

Hi..... i just got a little problem, and till now it hasn't been solved. Before i try Xen @ MT 3.25, i mean doing an instalation, all queue in simple queue worked fine, but after the next day i reboot my PC MT, all the queue didn't work included the HotSpot even in the simple queue the limiter alrea...

Akangage

Profile feature @ UserManager

Akangage

Hi.. guys!! I do have some problem with that, after i try loadbalance my 3 lines to get Full Line Download 3 Mbps, 1 line 1 mbps. I tried many ways but seems it didn't work at all.... sigh

is it needed more rule to bypass the hotspot servlet page running again?

Akangage

How about this one... Prints on a thermal (POS) printer.. http://info.microage.com/Campaigns/MicroAge/hotspot.bmp It is a bit rough here but it is an export. The original prints clean.. NOTE: this is format generated by "BarTender Ver 8.0" from seagull scientiffic".. I just build the...

Akangage

use something like add dst-address=0.0.0.0/0 gateway=10.0.1.1 scope=255 target-scope=10 routing-mark="WAN - 01" comment="" disabled=no add dst-address=0.0.0.0/0 gateway=10.0.2.1 scope=255 target-scope=10 routing-mark="WAN - 01" comment="" disabled=no distance...

Akangage

Nice help!!!!!!!!! It's work

Akangage

Hmm.... LB with 2 HotSpot Server!!! Let's try & eror..

Akangage

/ ip firewall nat add chain=srcnat connection-mark=odd action=masquerade out-interface=wan1 add chain=srcnat connection-mark=even action=masquerade out-interface=wan2 let me know if that helps What is the differeny if we using / ip firewall nat add chain=srcnat action=masquerade src-address=[LAN/Lo...

Akangage

I've try it, but somehow the connection will focus on 1 line 1st then if the 1st full then it hop to another line!! It's different from MT 2,9 the connection in the same time will share the connection as mention 25% each then when we downloading a file the full bandwidth will reserved for us!

Akangage

You can try 1st then you can get the conclusion

Akangage

Maybe thiz one can help you... thiz iz my config

Akangage

Config for which one? Firewall, NAT, Mangle or routing? Like the chupaka said that the basic it's not so far but the problem lays on NAT & NTH in Mangle.... If you use hotspot it preferable to use masquerade instead of src-nat and the NTH follow the sum of connection you used! I used the NTH 2,1...

Akangage

Yeah.. it's true what you say!! But for some reason I don't like policy based routing, when one of the connection is down we should manually change it or maybe you put another script to make it run automatic. Different with full bandwidth, when one connection is down, the another one will backup the...

Akangage

I'm found it!!! and it's really works 100% run..........

Akangage

its meant for ppl who want to split bandwidth not combine like your case

Yup!!! Is there anyone can help me, the refer or something else???

Akangage

You can try what I am working on right now. network 214.0.0.0/24 I split in 2 LAN1 214.0.0.0-127 and LAN2 214.0.0.255 config is as follows: /ip firewall mangle add action=mark-routing chain=prerouting comment="" disabled=no dst-address=0.0.0.0/0 new-routing-mark=LAN1 \ passthrough=yes src...

Akangage

Well, I've already try but it wont works.... Like thiz one http://wiki.mikrotik.com/wiki/Load_Balancing it won't works on MikroTik V3, Is there any additional information that miss for Version 3

Akangage

Is there any manual or tutorial for MikroTik V3 LoadBalancing

thanks for the info!!!

Akangage

@cmit
Well see, lemme try first!! But thanx for info.... but anyway, some of friend using 2.9.50 for PPPoE over same gateway the internet connection works fine!! I ask him but he rejected me and ask me to search first in internet

Akangage

/ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=arnet1 \ routing-mark=adsl1 add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=arnet2 \ routing-mark=adsl2 add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=arnet3 \ routing-mark=adsl3 add disabled=no distance=1 dst-add...

Akangage

Hi guys, is there any tutorial for PPPoE for the same gatewy?? I Mean if I take 2 ADSL connection from 1 ISP and 1 Gateway, is there any solution?? Link, referer or something else maybe.... ofcourse it's for MikroTik

Akangage

My User Manager able to add Limit for Download and upload even you say its for 10 or up to 1000 user simultaneously, just "check" the "Rate Limit" in Batch the set the rate limit Tx for Download and Rx for Upload!! Then all user will added same rate limit for Upload and Download....

Akangage

Well, my MT run well and there was no problem at all, maybe you should check the setting!! It maybe better if you cross check your userman setting with the manual

Search found 45 matches