download the stable version for your mikrotik from the mikrotik website and then open winbox select files and drag and drop the new version in files . Reboot the mikrotik router and it will be upgraded.
Hello everyone I just put some firewall rules input chain and dropped all invalid packets and accepted only established and related connection. If I log the packets dropped I see random TCP RST packets on random ports hitting my routers public ip. Those ip addresses are not even from the region wher...
I am not sure but I think you should know what kind of traffic you want to send through ether 1(vpn) and ether 2 and then mark you traffic and route them accordingly
I would recommend try to ping the ip of the printer you want to add to the network if you can ping it then all you need to do is add that printer into system from control panel but if you cannot ping it then just put some static routes that can be the only reason if you cannot ping that printer.
Hello everyone is there anyway for directing all traffic from one subnet to html page that is saved inside the mikrotik. I am trying to put some pppoe customers that are not paying bill to go to the html page . I tried using hotspot but it is not working and in firewall rules I could not find the op...
I am also having almost same kind of problem where we try to access one website and the it times out and after struggling for days we came to know that from our side we send hello packets TLS 1.2 but do not get response from the server ip is not blocked all configurations are good so wireshark helpe...
Appok I would recommend you use wireshark and inspect packets going to destination this will help you understand where the problem is?
Compare wireshark traffic on the sites which has problem and which does not has and you will have your problem narrowed down.
if I do not specify does scope or target scope the recursive is still going to work ? is not the scope and target scope that makes the route recursive?
Hy Anav
Can you explain me that how that target scope and scope works well?if we have unmanaged switch between main mikrotik that is default gateway and the mikrotik that is going to have recursive route what should I put for the scope or target scope and why those values matters?
sebastia Thanks for replying but that wiki I cannot understand I spent a whole week on it its confusing do you have any example or simple explanation for this scope and target scope difference?
In my case should I put 10 in target scope or 30 /
Hello everyone I had posted some days ago and I had asked how to make sure if the default gateway is up and is passing traffic. I know the configurations But I am confused with scope and target scope. I had one three mikrotiks attach to one switch for example MT1 MT2 and MT3 . For MT3 mt 1 and mt2 a...
mrmut It all depends how you want to use them if you want to connect all devices on swithes to be on same subnet then simply take one small switch and connect it to the router and then connect all other switches to the that new switch otherwise you can bridge all ports on router that are connected t...
Thanks 2forgs I had another confusion so that's why I changed the topic to unsolved if I already had PPPoE server on my ether 3 for example Do I have to create a hotspot on ether 3 and what about the profile and username etc I am confused with the configuration could you explain it a little bit more...
Without radius etc, one way would be to change the remote address on their secret - i.e. have an 'internal' / 'suspended' pool thats not a public IP that they get, then in your mikrotik have mangle rules for any traffic from that range to be redirected to your server where the HTML page is. Thanks ...
simply bridge the wireless port of router 2 with any other port where you want to connect your laptop or whatever this is give you ip of the subnet from the router one subnet.
Hope that solved your problem
Hello everyone I have a question we are mid tier wisp we do not have radius server nor we user manager of mikrotik. We have pppoe connection on the tower and we do billing manually by enabling and disabling secret. But now we just want a simple http page so if we disable a secret so they just go to ...
Hello everyone I have a question what is the best way for doing backup and loading onto other mikrotik. I used export and loaded it onto the other mikrotik but Do I need to change mac addresses and what other changes do I need to make and what about the binary one if i load binary onto the other mik...
Hello everyone I need suggestion for limiting pppoe clients speed if one mikrotik cannot ping other 1 For example we have a mikrotik 1 and mikrotik 2 mikrotik 1 is directly attached to the main mikrotik and mikrotik 2 traffic goes through mikrotik 1 We have mikrotik 3 that is also connected to the m...
Hy anav
I do not think that is the problem the mikrotik is not able to observe that isp1 interface is down I think that is the problem but do not know the solution
Hello everyone I am trying to have two default gateways from the same subnet. I am attaching the topology what I am trying to achieve is mikrotik 1 has the default gateway as isp 1 with ad 1 mikrotik 1 has the default gateway as isp 2 with ad 2 but when isp1 goes down the the default route on mikrot...
Hy sebastian We are using our /24 subnets which we bought from isp 1 is as our internal ip network with also some private ip's I do not think we are renting these ip addresses. Now I am thinking of changing AD's for default gateway on sites but that is also not working I am attaching the topology 65...
hy sebastia
We have /24 4 subnets from isp1 and we are just getting one ip from the isp2 so as far I know I can use isp1 /24 subnets with the new isp2 also because we paid for it am I right or it does not work that way?
Thanks anav for replying actually the new connection we are adding is for testing so thats why we are gonna send only one towers traffic there and we have a /24 subnet that we are using on our mikrotiks and default gateway for them is this isp 1 router and its all by static routing. I was thinking I...
Hello everyone we are adding a new connection we have one isp(main) that has provided us some ip subnets and right now with all static routing we are running a small network. But now we want to add a new isp connection. I need recommendations how we can achieve that. I am attaching the network diagr...
Hello everyone We have small network and we are adding another connection for the tower that is separate from our main network. So I was thinking of creating ipip tunnel and access the main router at other site. But the problem is how can I access another router that is behind this new router we are...
#1 Wed Jan 30, 2019 4:58 pm Hello Everyone We have one isp connection(mikrotik 1) and we are using 4 /24 subnets from this isp. All towers had their own pppoe servers everything is working fine with the static routes.Now we want to add another isp connection but this new isp connection is just givin...
I understand I made a mistake but what should I do to reset password I tried netinstall and downloading the 3 different versions but still its not working. I know the password for the router from which I had used binary backup but that password is not working .
I did binary one just to give a try they both were different devices . Now i ended up with wrong username and password even I know exactly what is the password and username but I think something happened wrong because of that binary backup I even tried netinstall my mikrotik is 3011 and tried downlo...
Hello everyone I did backup from another mikrotik that is different then this new device. I forgot to change settings and all I did was binary backup and did not change anything the backup loaded successfully but now the problem is with the password. I used every password I can use even the password...
Thanks Alain Casault for replying
the extension is .rsc and I did try with the system backup load command but it always says configuration file missing . Will try to do in parts now hope so it is gonna work
Hello everyone I had one mikrotik router 3011 and one mikrotik RB 850 gx2 I am trying to export configurations from RB 850 to 3011 but I am getting error file not found(6). Even I changed mac addresses, version ,serial number software id but still it is not working and saved it and then I uploaded i...
I fully agree with CZFan - hard to guess without config. Could be anything, but my personal bet is on misconfigured /ip firewall filter or /ip firewall nat (either packet is not being forwarded at all or it does not get SRCNATted so gateway does not know where to send it back) This should be actual...
just to let you know guys I had shared my wifi with my ethernet and that was acting as isp connection and it was giving ip with dhcp. I was trying to route pppoe but even without pppoe still mikrotik 2 cannot ping default gateway of router 1 that has isp connection
Thanks guys I am attaching some pictures I was doing this on lab to just get it work perfectly when we deploy these settings this is the first time it ever happened to me I worked on cisco but I never had this much small problem and cannot figure it out These are some ip addresses i was testing some...
Hello Everyone I was just doing a simple network I tried everything but the problem is I cannot connect ping main routers gateway.I have setup like this Mikrotik 1 is the main router ether 1 has ip 192.168.199.1/24 Mikrotik 1 has ether 3 as a dhcp client it is getting everything default route dns fr...
I think the problem is the dns server router 2 cannot ping the dns server in my lab environment I am sharing wifi with ethernet and ethernet is connected to main routers interface 8 (acting as isp connection) and I am running dhcp client on ether8 to get default gateway and dns and that is 192.168.1...
R2: change your pppoe-ip-pool addresses R1 route new-ippool address to R2 how can i create static route that points towards r2 I mean I can only put one ip and I have a range of 192.168.180.20-30 how I am gonna do that? chnage your src-nat src-address=new-ip-pool so i should nat new ip pool to that...
Hello everyone I am having a problem that I cannot solve if someone can help me I would be greatfull.Actually we are getting new connection from a new isp but we just have one ip from this new isp I know we can do masquerade private and create pppoe pools but in here. I have one main router(isp conn...
Hello everyone We are installing a new connection but we are having problem with pppoe traffic.I am attaching a picture also what we are trying to do. On mikrotik 2 for pppoe server I am using ether 1 ip (192.168.190.2)as local address for remote i am using pool (192.168.190.33-50) for dns in profil...
Hi TheCiscoGuy, what if we have just ether 1 on each routers interface and using unmanaged switches so all the routers are connected to each other on ether1(there is one public ip and one private).So with just one link how we are gonna do cost change for load balancing I am attaching an image what I...
Hy ZeroByte how should I change cost when I have just one interfaces(using unmanaged switches) that is connecting to two different routers .I ll attach an image for example and what would be a prefer way to change speed for all my pppoe clients If my routers are already using their maximum limit for...
Hello everyone, for load balancing we want to write a script so that if router cannot ping another router or routers so it should change all the speed for its pppoe connection to 1MB , so if the link is down and traffic starts to go through it(its already using its maximum speed) so it will change i...
Hi Ape, I know the problem with this architecture but the thing for just right now i need to setup ospf and i am trying to put iBGP over ospf but the problem I am having is just pppoe and I do not want to move them to centralized location So if i just configure ospf and add pppoe addresses to networ...
Thanks anumark but I have my clients on pppoe and the interfaces on which they are connected is acting as pppoe server for them and they all are on public ip addresses so if I put all those ip addresses on the ospf network too will it work?I am attaching a topology diagram for that .I would apprecia...
Hi Ape,
I also have pppoe server running on each routers interfaces except the ether 1 is it gonna effect that pppoe and do i have to add those pppoe(public ips) to the networks for ospf too?
thanks
Hello everyone
We are migrating from static routing to ospf and I was just wondering if we are using pppoe for every client is it gonna work with ospf too?
Hello everyone we are moving our wisp from static to ospf and we also want load balancing but I just started working for this company(I had cisco background) there are alot of confusions for me, first is we have two ips on one interface one public and one private,all our customers are on public ip w...
Hello Everyone I had a question if someone can answer me I would really appreciate it. We hava a ring topology and and their is a main router.so my question is because of ring topology most routers are not connected to the main router(except 2) then why their default gateway is always the main route...
Hello Everyone We are operating a small WISP. We been using static routing and we had no redundancy at all but after having some power failure at some of our sites now we want to have redundancy and load balancing.So my question is can we just use static routing with different costs value for redund...
Hello Everyone We are operating a small WISP. We been using static routing and we had no redundancy at all but after having some power failure at some of our sites now we want to have redundancy and load balancing.So my question is can we just use static routing with different costs value for redund...
Hi everyone I am a cisco user, as far as i know we usually configure one ip on one interface , i just recently started using mikrotik routers and i came across several configurations where on one ethernet port more then 5 6 ip addresses are configured , some of them are private and some are publics ...
Hi i am new to mikrotik , i need help understanding NAT in mikrotik routers where I am working all the routers are configured with some private and some public ip addresses , but the thing is there is no nat rule configured there, how these ip addresses can still work without nat? we been using all ...