MikroTik

chbla

viewtopic.php?t=208101#p1078367

I'm not familiar with Zerotier, but it sounds interesting.
Not sure if there are any benefits though, I have to read into it.

chbla

As it seems to work out of the box, I think I will just leave it as is... and hope it stays like that

chbla

This morning, I noticed that the Camper was actually able to send messages to my database. So it somehow connected. And right now I can also reach its machines. In the Mikrotik Peers Status it says the IP 192.168.1.15 is connected: 2024-06-01_09-13.png In the Teltonica RUT950 status (Camper router) ...

chbla

oh, looks like it's already connecting
shouldn't it then be able to access the other machines as well, since traffic will go through the tunnel in the same way?

chbla

@anav, ok one more question - as you noticed I have two Networks 192.168.1.1/24 (my House) and 192.168.44.1/24 (a Camper Van) which I connect. The reason is that the Camper Van is sending environmental data, battery percentage, etc from 192.168.44.158 to 192.168.1.25 (a database). So the Camper is c...

chbla

Thank you for the hints! You were right, I've removed source NAT, and it works with the initial rules! I've also added persistent keepalive and corrected the allowed IPs. It looks like now everything is working fine ;). I will check it again in detail to really understand it. Thank you very much for...

chbla

yeah that route looks better........ and if not try 192.168.34.1 as an alternative. I think I found the problem, I need to add the IP of the peer to REMOTE_MACHINES: 2024-05-31_09-03.png I'm not sure how this works, but the other entries might then be obsolete if it just uses the Peer IP.

chbla

Thank you! I've also added these changes. From the home network (192.168.1.x) I can now access hosts in the camper network (192.168.44.x). However, I cannot access any machines in my home network, from camper (e.g. if I try to connect from 192.168.44.158 to 192.168.1.21). The config on the Teltonica...

chbla

Sorry, I've uploaded the old config by mistake. At the moment I cannot test 192.168.88.x as I have to reconfigure it first (it has the wrong keys now). But it's 2 hours away. I'm unsure which IP I have to use for the routing config on the RUT950 (correct, that's the other router). I guess then I hav...

chbla

Everything looked good until I reached FW rules, mostly out of order........... (i) moved fastrack rule down to be with other forward chain rules. (ii) moved wirguard handshake rule to first of admin rules. (iii) removed wg remote from access to Router for config purposes, I am assuming that those ...

chbla

I had a business trip, sorry for the late answer. I have no idea what you mean by home network................. Not sure what the right word is, just a normal home router (cablemodem) with internal network. Anyway, I think I got most of it working now! But I'm not sure if I confused some of the line...

chbla

Sorry for the confusion, I wanted to link to this video: https://www.youtube.com/watch?v=P6f8Qc4EItc It's just normal Home Networks, connected to the internet. The IPs I'm referring to are just the internal IPs, they all have one external public IP. The one we are talking about is what I refer to wi...

chbla

Nice, now Wireguard is working too, thank you! I think I understood most of the changes, but I'll read it up in detail once complete. I've added ssh and webfig access from inside the LAN. Sure but you need more info about tessin and camper. Do you simply mean they represent subnets on your Router?? ...

chbla

Changes Mostly. I'm almost there (I think) - internet is working normally again. Thank you! I tried to use only one bridge and wireguard interface. However, I'm not sure about Wireguard and Firewall rules, I might need a bit of help. I'm unsure which of the existing rules I should have kept. I can ...

chbla

Yeah lots wrong LOL

Thanks for the honest correction!

I need to check your response in detail, but already started changed it.
I will report back

chbla

free-hdd-space: 952.0KiB
I have even less (440 KiB) and it's not affecting performance, create topic with issue description and full config, maybe someone will help.

Thanks! Weird... I've created a thread.

chbla

Hi there, I've upgraded my hAP AC2 recently to the latest stable version and setup Wireguard on it. Since then, I have severe connection issues. I cannot really isolate it. Ping goes up to 1 sec, timeouts, then gets stable again, and it repeats... Connections get interrupted, etc. I get the same res...

chbla

i am very happy with the performance of wifi-qcom-ac package on hap ac2 on 7.14.3

but dont have free memory anymore

hapac2-mem.jpg

Hm weird, no performance issues?
I have no idea what else could cause it...

chbla

Quick question, I recently noticed severe internet problems at home (using a hAP AC2). It's very slow, connection drops often, and basically unusable. I thought it's the cable modem, but a direct connection is fine. I then found out that there is almost no disk space left: free-hdd-space: 952.0KiB t...

chbla

Nevermind, it works if I change it to find where active-mac-address.
Thanks!

chbla

Here's a quick try at it: # mac-address is case sensitive -- use upper only :local x [/ip dhcp-server lease find where mac-address="20:3A:07:F2:B6:3F"] :if ([:len $x] = 0) do={ # not found /tool fetch http-method=put url="http://192.168.1.25:8080/rest/items/pres_ch/state" \ mode...

chbla

Thanks a lot! I will try this within the next days and report back

chbla

I would prefer to not have a separate app like Splunk to do this, I guess the leases are accurate enough to tell if someone is there or not. There is an additional problem with timeouts though, the phones switch into powersave after a certain amount of time. They keep coming back though. @JJCinAz th...

chbla

Hi there, I've got a basic lease script to detect if my phone is present: :global chMAC "F4:xxx"; :global leaseBound :global leaseServerName :global leaseActMAC :global leaseActIP :if ($leaseBound =1) do={ :if ([$leaseActMAC] = $chMAC) do={ :log info "assign CH"; /tool fetch http...

chbla

Yes throughput is okay, much better than with WIFI.
I also used it to stream video via tvheadend.

However the final position is not fixed so I'm still doing tests.

Scripts would be very nice, always good to look at existing solutions!

chbla

I bought the Hap AC2 now with some Cap ACs and so far it's working nicely. I'm no pro and I don't have 100 clients, so I probably do not note any big differences. I still have to look at VLAN etc because I want to get a XIAOMI vacuum robot and need to separate it from my internal network as they log...

chbla

As mentioned I'm looking for a private setup, nothing professional, just my home.

chbla

How about Capsman, wouldn't that be a benefit to go with Mikrotik?

All in all, what would you suggest for a small setup (house with 3 floors, concrete) to go with the Hap AC2?
Shouldn't be too expensive I think that's not needed in my scenario.

chbla

So all in all, which would you prefer, the HAP AC or AC2 for a home (concrete house) scenario?

chbla

I'm aware of that, that's why I asked for suggestions

chbla

The Ruckus seem even more expensive.. I'm not sure if this isn't way overkill for my home (concrete house).

I'm just trying to figure out whether I should get the Hap Ac or Ac2 and which Wireless AP (4 of them)... this is getting really difficult it seems

chbla

Hap ac2 is good device and can handle lot of traffic/firewall rules etc. But if you want high speed + more switch ports etc. why not go directly RB4011 with Wifi 4x4 on 5GHz. If you are looking for SOHO/SMB kind of high speed/system extensions, the RB4011 will be very good option. It's overkill for...

chbla

Is this still true, is the UAP-AC-LR preferred over the Cap AC? Any more suggestions? Understand what is being said here about MikroTik wireless. Slower 54Mbps connection rate is not a problem for home users surfing the internet on their mobile phones and tablets. The issue is when you have a lapto...

chbla

Is this still true, is the UAP-AC-LR preferred over the Cap AC?

I'm trying to find a setup for my house, the main router will either be the HAP AC or HAP AC2 and I thought about the CAP AC for
wireless - I'm unsure though reading these threads...

Any more suggestions?

chbla

Hi there, I want to get rid of my Asus RT-N16 and a couple of WRT54GLs and replace them with Mikrotik. As the main router I'm unsure if I should get the HAP AC or the HAP AC2 . I don't have any devices that can use triple chain right now, but I'm not sure how fast this will be adopted in the future....

Search found 35 matches

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Connection issues with hAP AC2, any problems with my config?

Re: Running out of space on 16MB RouterBOARDs [SOLVED]

Connection issues with hAP AC2, any problems with my config?

Re: Running out of space on 16MB RouterBOARDs [SOLVED]

Re: Running out of space on 16MB RouterBOARDs [SOLVED]

Re: DHCP Lease script - execution order wrong?

Re: DHCP Lease script - execution order wrong?

Re: DHCP Lease script - execution order wrong?

Re: DHCP Lease script - execution order wrong?

DHCP Lease script - execution order wrong?

Re: Cap AC, Hap AC2 or UniFi?

Re: Cap AC, Hap AC2 or UniFi?

Re: Cap AC, Hap AC2 or UniFi?

Re: Cap AC, Hap AC2 or UniFi?

Re: New Setup: HAP AC or HAP AC2, plus CAP AC

Re: Cap AC, Hap AC2 or UniFi?

Re: Cap AC, Hap AC2 or UniFi?

Re: New Setup: HAP AC or HAP AC2, plus CAP AC

Re: Cap AC, Hap AC2 or UniFi?

Re: Cap AC, Hap AC2 or UniFi?

New Setup: HAP AC or HAP AC2, plus CAP AC