It seems that I solved also the trunk port... Everything is working on tplink switch. Now, I need to come back to just 1 vlan: vlan10 and default pvid 1 :). Thank you for all your help. I'll continue to work on this and after I will do all the things, maybe we will discuss about the DNS problem that...

And back again. I solved something: - I have the correct VLAN IP on WLAN1 and WLAN3 (vlan10 an vlan20) - I have the correct VLAN IP on ether4 &5 (Vlan 10 on ether4 and vlan 20 on ether5) The solution was to put bridge on tag...not ether2 :) I don't know if it is a problem with the TP-LINK switch...

And I'm not sure about this....
I tried your syntax but something is wrong....

Ok, changed.
Still the same problem. I get the IP fro 192.168.0.1...

But...as I told you, I tried the config from this post:
viewtopic.php?f=13&t=143620#p706998
And it seems that on wireless interface he didn't put any ID...and it was working....

Ok, good. Clear for me. will delete the second configuration. I started from scratch...config without firewall. It should be ok, right? On the WLANS i don't get the right IPs...waht can be wrong? Of course I'm tring now with 2 vlans.... /interface bridge add admin-mac=B8:69:F4:xxxx auto-mac=no comme...

Hmmm...but this means that on ether4 I will have just VLAN 10, right?

So, please take a look over those 2 pictures.

In one case the VLAN is under bridge and in one case under bridge.
I think that it is impossible to ad WLAN3 on VLAN if the VLANS are under ether2...

For the moment I don't use internet (on this stage because i keep the router on my desk).
So, the main problem is that I want to have a trunk port (with both 1 and 10 vlans)...let's say no 4.
I use a switch and I want to have port 2-5 on vlan 1 and 6-8 to vlan10.,.

Hi anav,

Thank you for your review.

Ok, I will modify the dns....and I will continue to play with the settings.

Have a nice day!

Thank you anav. I tried your config but I did something wrong. Then I tried to follow pcunite post. I did it, but I kept firewall default settings because I saw some strange logs when I removed all default rules. In this moment I don't have the router on my network. I have it on my table. I also hav...

Hi guys,

Even I got help fron this forum (anav), I'm still stuck.
I tried to follow "all in one" post but I need to have also a trunk port (ether5).
How can I do it (I need ID=1 and 10).?

It is to complicated for me this router ( i have hap ac2)

Thank you very much. I don't have access to the router in this moment but \I will try to configure tonight. It is not very easy but I hope that I will be able to do it. I'll come back with feedback. And yes, you are right, I don't need a management network. I followed an exempla from another site......

Dear all, This is my first post on this forum. I'm very happy with my router: MK HaP AC2. I have a residential PPPoE gigabit internet connection. I bought this device because i'd like to create 2 separated networks. My actual network is 192.168.0.0/24. I need to link 1 SSiD and 1 device port to the ...