Hi! We are a small ISP and are facing a problem with one of our customer. The customer has a gigabit cisco small business router, that router is connecting to our network via PPPOE (on gigabit fiber line with a media converter cause the cisco has no SFP module support) and the problem is that the ba...

Dont understand your config at all. Why three bridges? What is the pppoe client doing on vlan1001 is that a vlan provided by the ISP?\ Need to provide a network diagram. The router config can be a little bit confusing thats true and it is hard to explain every vlans and ports functions. VLAN1001 is...

The complete MT config would be required to ascertain the issues..........

I attached the full config, hope you can open it, maybe you will find something. I'm clueless. The firewall filter accept rules were just attempts if maybe the problem lies there.

Thanks in advance!

One should simply have to port forward the incoming VPN port to the zyxel router from the MT. Thus the incoming handshake goes to the zyxel device. Hi, Ok I know that a port forward should work, maybe I am only applying bad rules so I copy the created rules please have a look at them. Following rul...

Hi, We have a trouble at one of our partners. They have a system admin company who are doing their IT stuff, they brought a Zyxel Firewall and would want to connect with an L2TP to their device, but the zyxel is behind a Mikrotik 960PGS router, and the mikrotik is doing the PPPOE connection and DHCP...

2022 Edit :) The bug is till persistent in 6.49.5 and 7.1.5 -too. At our setup the firewall raw prerouting action does not work but adding a rule to output chain OSPF starts working .... Really annoying because the bug was not showing up in our 6.47.1 setup but after upgrading the software the bug s...

Hi! We got a setup with a CCR1036 followed by a CRS317 that is connected to 3 Dell servers running Ubuntu with FRR OSPFD. The OSPF setup was working on the old 6.47.1 software that was before on the CCR, but after we upgraded to 7.1.3 we can't get OSPF to work. (The CCR got bricked by the update so ...

Facing the same issue, bricked 2 devices in my network both SXTLite5 , one upgraded from 6.47.X , other from 6.35.5, package update went well but after that upgrading the firmware in system/routerboard the s..t happend

Hi There! We have a question regarding how to upgrade a Dude server running on VMware? Is it enough to put the needed x86 packages via winbox and reboot it or it won't work properly? If we need to install a complete new image to upgrade the server than can we reuse our P1 license? Thanks in advance!