Well, I added the last two... It works.

Oh well... but I don't know how it looks like in the Winbox GUI.

Ok, GOT IT!

But my question would be, how does it look in the WinBox GUI? Do you know where to look for it?

from the Terminal

add action=drop chain=input comment="defconf: drop all not coming from LAN" \
expected end of command (line 1 column 5)
[admin@MikroTik] /interface list member> in-interface-list=!LAN


Is the screenshot correct?

Hi everyone, I need some help. I just recently hard reset my Mikrotik router (RouterBOARD 750 r2) and now after normal configuration, my PC now isn't able to connect to the Internet via the Mikrotik router, it says unable to resolve DNS, unable to ping external IP. BUT I am able to access the Intern...

So.... So here's the good news first, I managed to get the thing running AFTER having to do another factory-reset when the bridge setting was changed from ether2, the unit just disconnected and I couldn't reconnect to it. I have no idea if the change of LAN address range from ether2 to bridge was th...

Err... Ok, because that's the setting given by our ISP here for all routers. And it was working fine before upgrading to the patch v6.43.8. How do you define the LAN IP address on the bridge? The ageing-time on bridge is the default given in the Router. No changes. Maybe I'll start a new thread for ...

Hi guys, I just tried to ping from within the router to 8.8.8.8, I'm getting a timeout. I suspect there's something missing or misconfigured in the Firewall. here's the config (after the changes implemented) # jan/02/1970 02:37:44 by RouterOS 6.43.8 # software id = TR50-ZDR7 # # model = RouterBOARD ...

Hey bro, Still not working, the router is still not resolving DNS after rebooting it, is there something else which I need to configure the DST-NAT in the firewall or change firewall rules? By the way, as you have suggested, I've changed the interface settings and disable DHCP client on ether1 . Sor...

/interface print detail Flags: D - dynamic, X - disabled, R - running, S - slave 0 R name="ether1" default-name="ether1" type="ether" mtu=1500 actual-mtu=1500 l2mtu=1598 max-l2mtu=2028 mac-address=CC:1D:E0:40:BF:EB last-link-up-time=jan/02/1970 01:45:33 link-downs=0 1 ...

Hi guys, FYI, here's the Mikrotik guide setup which I've been following as provided by some Mikrotik user here for our ISP. https://www.evernote.com/client/snv?noteGuid=5b32555e-8d6d-49f7-a206-ed75d87f86a0&noteKey=8da94a1dd8fbe9c1&sn=https%3A%2F%2Fwww.evernote.com%2Fshard%2Fs97%2Fsh%2F5b3255...

BTU (vlan500) ---> HexLiteRouter (PPoE/Vlan500, 192.168.88.1) ---> PC (192.168.88.5)

You can reference the following setup guide as shown below:
https://www.mikrotik.com.my/setup-for-unifi/

I follow the guide without any modifications (apart from entering my username and password).

So what route and addresses should I add? Add to the routing table? Examples?

No I'm not relying on DHCP for connectivity, just static IP.

I'm sure that the BTU modem is working because I can directly ping 8.8.8.8 using the ping tools in the hexLite router. I can also see the temporary IP assigned to it.

The reason which I'm asking this is that I've had the experience of cutting off the power directly to the router just like that and the next day, the indicator lights on the router didn't work (light up), although the router still functions. I had to factory-reset it to get the indicator lights back...

Hi,

FYI, both the PPoE and the VLAN work just fine, it connects to the service provider with no problems.

Err... For your information, I'm not doing DHCP on my PC, I do static IP which worked very well for me. So do I disable DHCP? I remember I didn't have to do that previously when I first setup this unit. That's really weird. here's my ppoe and vlan config /interface vlan add interface=ether1 name=vla...

Hi there,

I would like to know how to shut down the router (750 r2) before I switched off the router after using it daily? There isn't a power switch for the router, or this router isn't meant to be switched off most of the time?

Thank!

Hi there, I just factory-reset my hexLite 750r2 router and patched it with the latest patch But now I have a problem, I can ping the router (192.168.88.1) and use WinBox to connect to it from my PC (192.168.88.3), but now I cannot browse the internet nor ping outside IP (e.g. 8.8.8,8), it shows &quo...