Thank you, that was helpful. It set me on the right path, and I now have it functioning with a minor exception. I created an EOIP tunnel between the two sites. Then, I bridged the tunnel with the physical port, and I am now passing an IP address from Site-1 to Site-2 without any issues; perfect! The...

Hi all, I have a need to setup a singular subnet (10.100.0.0/24) across multiple MikroTik routers that are geographically located in different places. I have been running this setup for a long time and we already have Site-To-Site connectivity setup over OVPN and have countless subnets, vLANS, etc. ...

Sorry for the delay on my response. L2TP-8794 is the (L2TP Server Binding) interface. Within the IP - Routes. I have set the gateway to L2TP-8794 (reachable) for AD (10.0.1.0/24). This works perfectly. But this is also what randomly gets switched back to 'unknown'. I might point out this down not ha...

I run a site-to-site VPN connection between my home site and a number of other locations. This works great. But for whatever reason at random intervals, I lose a custom route that I've set up that is required for me to see the other locations IP range. It changes from the L2TP VPN interface to unkno...

Posted before I saw the reply!

We appear to be working from both ends now. Thank you everyone!

So correction. From router B I now appear to be able to ping any device from Router A in the 10.0.0.0/24 range.

From router A I do not appear to be able to ping any device in the router B range of 10.0.1.0/24 range except 172.0.0.250 and 10.0.1.1.

Thoughts?

This has helped! To a degree.

I added 10.0.0.0/24 to Router B
I added 10.0.1.0/24 to Router A

I can now ping 10.0.0.1 from Router B
I can now ping 10.0.1.1 from Router A

But I still cannot ping for example 10.0.1.40 from Router A. I still get a timed out response on this attempt.

I have recently successfully established an L2TP/IPSec VPN connection between two Mikrotik routers in two different geographical locations. For Example Purposes: Public IP A: 155.34.35.36 Public IP B: 156.33.32.31 LAN A: 10.0.0.0/24 LAN B: 10.0.1.0/24 VPN A: 172.0.0.0/24 VPN B: 172.0.0.250 I can PIN...

I have successfully created this setup up until a certain point. Primary LAN is 10.0.0.0/24 VLAN is 10.0.1.0/24 I can successfully link two MikroTik routers the new router will connect on the 10.0.1.X range and be able to fully communicate across subnets. But the secondary location obtains my IP add...

Anyone have any thoughts on this?
Appreciate any possible insights.

Afternoon, I currently have a MikroTik router located in two different physical locations. Each of them operating on 10.0.0.XX (different problem to be fixed). I have a VPN service at location A that is setup on IKEv2 this is provided not by the router but provided via Microsoft's VPN tools. This co...