MikroTik

Nutcracker

Just had a technician out to site, and another problem that we picked up with 6.45.1, is that our previously working hotspot config doesn't work either. Simply downgraded back to 6.44.3 and it was fixed. I don't know what Mikrotik did to test this new version before deploying it, but this is the wor...

Nutcracker

Link to my reddit post: https://www.reddit.com/r/mikrotik/comments/c8nu79/no_simple_queues_for_pppoes_after_upgrading_to/ As the title suggests, our working queuing system has stopped working once the PPPOE concentrator gets upgraded to 6.45.1. When the PPPOE dials in, you can find it in the queue l...

Nutcracker

Bump - Any advice or suggestions?
We would really like to get back to graphing the traffic on this router.

Nutcracker

Update - We replaced the CCR this morning with a brand new one, and updated to RouterOS 6.43.4 in the process.
We are still seeing the exact same thing.

Does anyone have any suggestions or ideas?

Nutcracker

As previously mentioned, we are using LibreNMS, which is using SNMP V2. Below is a screenshot of the NMS config for this routerboard. It is the same as all other routerboards we have on the NMS. Capture.PNG As for the concern about IP>Accounting, we use that across the network and are not seeing thi...

Nutcracker

If you like to graph traffic, you can export the data to Splunk and graph it there. Splunk is free up to 500MB log/day. Se more info here: viewtopic.php?t=137338 Look at Miktotik Traffic screenshot Sorry mate, but did you even read the thread? I don't want to turn away people that are trying to hel...

Nutcracker

bump

Will be upgrading to 6.43 sometime this week to see if that solves anything.

Nutcracker

Took a quick video of it and posted it on Youtube. Tried to replace the office noise with some music and I think I made a mess of it, so just turn off the volume to save your ears. https://www.youtube.com/watch?v=9i9mz5ncHD4 Been looking at the Profile tool for a while now, and what you see on the v...

Nutcracker

Picked up something now which may or may not help identifying the issue.
I opened up the fasttrack connection mangle rule, to check it's traffic graph, and it looks much better overall.
What was weird was that when I opened any interface, the graph went bad.

Capture.PNG

Capture2.PNG

Nutcracker

Sorry, I misunderstood your question. We are using SNMP v2. Here is an export: /snmp community set [ find default=yes ] addresses=0.0.0.0/0 add addresses=192.168.1.1/32,192.168.0.0/24 name=CompanyName /snmp set contact=contact@companyname.co.za enabled=yes location="IDC Location" trap-comm...

Nutcracker

We are using LibreNMS, and it is default configuration. Works perfectly fine for over 100 other devices, some doing much more traffic via worse connections.

Nutcracker

There definitely isn't congestion between winbox and the device, but just to make sure we tested it from a connection that is fibred to it(via a 3rd party, but with plenty of capacity). Below is the screenshots from both locations for comparison(please ignore the packet loss on the second pic, had 2...

Nutcracker

Nutcracker

Hi all We have been having an issue where the interface's graphing is, for the lack of a better term, smooth. Please see what I mean on the below image: Capture.PNG We are also experiencing that the access to the router via Winbox is very sluggish, although the latency to the router is constantly in...

Nutcracker

At some point after you fix the typo in the title

Seriously though, I would love an answer on this question as well.

Nutcracker

Some more info this morning: 05:00:00 script,info Checking for RouterOS upgrades 05:00:00 script,info Checked for RouterOS upgrades 05:00:00 script,info Checking firmware... 05:00:00 script,info No update. This is what I am getting on most router's this morning, yet they are not upgrading to 6.42.4(...

Nutcracker

Hi all Below is the script and scheduler items that I am busy testing out. Problem is that it seems to work sometimes, but when I leave it to run on it's own at 05:00, it doesn't complete and simply loops. Am I missing a semi-colon or something? Any assistance would be appreciated. /system scheduler...

Nutcracker

When will we be getting our hotkeys back in Winbox? I am talking about the following: r - remove d - disable e - enable The following still work: a - accept c - comment Been using Winbox for nearly 10 years now, and this frustrates me. As has been suggested in other posts, why isn't there an option ...

Nutcracker

Thanks for the replies guys. We are testing 6.26, but we are experiencing queueing issues. We use PPPOE's for our clients with radius authentication which assigns the profile(line speed). We are only getting half the required speed when testing.

Nutcracker

Hi guys Need some advice before the plunge. We need to upgrade our entire production network's routerOS(primarily routerOS 6.6 atm). We have been thinking about upgrading it straight to routerOS 6.25, but naturally we are a bit hesitant. Usually I would spend a day or 2 going through the forums and ...

Nutcracker

Hi guys I might be missing something, but I have tried and checked and can't find a solution for this. http://i.imgur.com/U3JULPG.png I recently upgraded to v6.20 and upgraded the firmware. I click on "Or click here to see them all", which gives me about 2 seconds of route before it goes b...

Nutcracker

+1 bump

Any updates?

Nutcracker

Thanks for the update indeed. I have tried dropping the TX power by shuffling the antenna gain and power rates till I got the signal around -60, but I am getting much worse reults than just keeping it all default. While I am fine blasting away and getting my speed for now, I would like to start movi...

Nutcracker

Hi all I have been digging around a bit but couldn't find anything, so decided to try my luck with a new post. We recently got 2 x RB912UAG-5HPnD to test with and see how they perform versus Ubiquiti Rocket M5's. Thusfar, we have not gotten the greatest results, but as I keep telling the higher ups,...

Nutcracker

Hi there

Sorry for the thread resurection, but we are experiencing the same issue with pppoe connections. Unfortunately we can not move over to queue tree, unless someone can show me how to do that with radius and pppoe connections.

A reply from MT on this would be appreciated.

Nutcracker

Here is a email that I got from MT when I asked the same question.

Hello,

Queues can't see packets with MPLS labels, only IP traffic. So if you enable MPLS
then packet are switched (not routed) and queues can't see them.

Regards,
Maris

Nutcracker

Post removed...
Soz for not opening my eyes first

Nutcracker

It would be nice if Mikrotik could give some feedback on this.

Nutcracker

But doesn't the script hang waiting for someone to press "y" for the upgrade command? Or does ROS, when running this command via a script automatically know to bypass the [y/n] prompt? RouterOS automatically bypasses the [y/n] prompt. Its good(for me, bad for you) to hear that other peopl...

Nutcracker

Hi folks Just want to find out if any of you have been experiencing routerboards freezing when upgrading them to RouterOS 4.16? We have had 2 x RB493AH, 1 x RB450G and 1 x RB600A freeze after the upgrade. To do the upgrade we run this script: /system scheduler add comment="" disabled=no in...

Nutcracker

I am sure that it can't be that big a request to have IP Accounting having support for IPv6. We do not need all the extra information that Netflow/IP Flow/Traffic Flow provides. We simply require the source address, destination address and bytes transmitted. We don't even need the amount of packets ...

Nutcracker

Hi there I would just like to know whether anyone has used IP Accounting with IPv6? From what I read, RouterOS 5 beta doesn't have support for this, but is some what concerning, as our entire network's billing run on it. IP Flow is not an option for us as we can not afford any accounting to go missi...

Nutcracker

IP accounting is exactly what it says, it accounts the IP traffic. It is not effected by ports or protocols. It simply tells you how much traffic was done from this IP to that IP(bytes and packets)

Nutcracker

Is there any chance of making that line any short, ie just the IP and some text of our choice?

PS. I work with Geoffb, that is why i am asking.

Nutcracker

Hi all We are in the process of giving all our highsites public IP's, so that when the user does a traceroute, its looks like he is hitting the internet after his gateway. To complete the illusion I want to add DNS names to the IP's. Thus far I have been unable to get this right, but then I don't th...

Nutcracker

So you can take to the time to explain what type of forum this is, but you can't tell us if it is possible to do what the user requested? Correct me if I am wrong, but didn't you just waste your time by posting. Oh and if you are going to take the time to delete my post, please just take the time to...

Nutcracker

Excuse me, or does it seem that this post, like many other, is just getting no where.

More people than just one are looking for an answer on this, but yet we are still waiting on a response from MikroTik.

Nutcracker

Hi all I have a Intel Frostburg motherboard with a 1.8Ghz Core2Duo and 1 GB RAM. I first installed this machine when v3.0rc4 was out. Back then it did not pick up the NIC. I sent off a ticket to MT and they said, please install latest routerOS(which was rc6 at the time). I did this, but still no luc...

Nutcracker

Ok cool, I'll roll it over at the next meeting and see what they say. Hopefully we can implement it quickly there-after and then I can give you guys feedback.

Nutcracker

So what you are saying is that you just mark the packets using Mangle rules, then queue them using queues(tree or simple) with different priorities, correct?

Nutcracker

I want to do exactly the same, because my situation is identical. Can't wait for one of the guru's to reply so that we can know how to do this.

Nutcracker

Never thought of forcing the speed to 10Mbps.

Thanks, I'll try it it and tell you what happened or didn't happen.

BUT FIRST

I am taking the weekend off.

Nutcracker

You don't say...... sorry if I am a bit sarcastic, had a rough day. I have tried it, all that happens is: The buttons gray out for a while(as if its doing something) and then it goes back to the same state as what is was. While all of this is (not) happening, nothing happens in the telnet session to...

Nutcracker

Nah, its not applicable to me, but a curious thing is that the whole time while I am trying to netinstall the RB, I see my Ipod in netinstall. I almost installed RouterOS v3.0rc8 on my Ipod :lol: Anyway, if i can't find a way to make it work by the middle of the day, I am just taking it to the suppl...

Nutcracker

Ok I have read most of the other post regarding lost passwords and have come to realize that the only thing you can do is Netinstall. I also realize that you lose all your data, which is fine by me, because I want to use the routerboard for something else anyway. This is what I have done: I have con...

Nutcracker

Here is a idea. Force all bandwidth test traffic(i assume that it has a specific port) to the desired RB. Then create an admin username(as it is the default) and blank password on the RB with just bandwidth test rights. All the client has to do now is: 1. Download btest.exe 2. Open it 3. Click start...

Nutcracker

I don't think that you can guess the date correctly. Guessing the date is like having a 8ball that has eight answers: 1. Outcome looks murky 2. Uncertain... 3. Try again later 4. Ask yes or no questions 5. You will fail 6. Don't ask this question again 7. Yes 8. No All tho they are all irrelevant, t...

Nutcracker

Please...

if the results are the same with a dual feed as with separated antenna's we will then know that it has to be something else. Hopefully if the problem is found it can be fixed in the next release of v3.0

Nutcracker

Hi all. I have a slight problem(again...). We had a motherboard failure on our main server. It was a MSI motherboard and it has now been replaced with a genuine Intel motherboard. Before I swapped the motherboard, I made sure that it should work by checking the forum for other related occurrences. T...

Nutcracker

I am quite interested to see what the response from either MT or the other Forum trolls are going to say. I am busy setting up OSPF on our network so that the clients can have uninterrupted service if one of towers go down and there is another way around. But if you say that there is a problem, I'd ...

Nutcracker

Well if it is a inter-radio noise issue, why did MT make the RB333's slots so close? And in the same breath, why would they then make the R52-H? I chose the R52 range because they are optimized for MT and I needed all the throughput I could get.

Nutcracker

how can you turn the power down? It is already on 0. Can you make it a negative number?

Nutcracker

After further testing I found that on UDP, I get approx 30Mbps in one direction while using Nstreme Dual.

If I switch it over to AP Bridge and Station(with Nstreme enabled), I get in excess of 60Mbps over the same distance in the same direction.

Any ideas anyone?

Nutcracker

Hi all I have setup a new link for one of our clients that need high throughput (approx 18Mbps in one direction). Here is my layout: RB333(2 x R53-H) <===> Nstreme Dual <===> RB333(2 x R52-H) I have set the band to 5Ghz-turbo and the frequencies are 220Mhz apart. We are also using new dual feed grid...

Nutcracker

I would just like to apologize to the people who are reading this thread. I have no right to get angry with people who are trying to help me with the problem.

I have sent an email to support@mikrotik.com as requested

Nutcracker

JUST GREAT start the re-install. It asks: "Do you want to keep old configuration[y/n]" I select yes. THEN it tells me something to the effect of "Was unable to keep configuration, license does not support it." Reboot the server, login in with default settings. Now there is a new ...

Nutcracker

I found some help on another thread: http://forum.mikrotik.com/viewtopic.php?f=2&t=15235&p=71274&hilit=Please+attach+it+somewhere+else.#p71274 I have a back-up of the server and as long as I keep my license, I'll be happy. As I understand, all you do is: 1. Turn on the machine 2. Pop the...

Nutcracker

That is going to be a problem, seeing that it does not start RouterOS. The only thing that we can give you is: Loading system with initrd Uncompressing Linux... Ok, booting the kernel. ERROR: Could not find disk! Please attach it somewhere else. This seems to be the only thing that phendry and I hav...

Nutcracker

We are using a Intel Pentium 4 3.20Ghz processor(single core with HT), with 1 Gb Ram. 80Gb (no raid) sata drive. The motherboard is a Tyan server motherboard. As per my previous post, the only difference between the original and the current box is the CPU.

Nutcracker

I also have the same problem. We initially installed RouterOS v2.9.x on the machine. It worked fine untill it started crashing at irregular intervals. I contacted MT and they told me to send them a support out. I never did this because shortly afterwards 2 other servers of the same brand crashed :sh...

Nutcracker

I am trying to do the same thing. I am monitoring my whole network with SMS notifications and I can't afford the Dude to crash and then not have a back-up. Also the back-ups are to big to email, so it needs to be transferred to a remote server(probably Linux) via FTP or something. I really thought t...

Nutcracker

I'll change the country to something else tonight. I can't make changes tonight currently as the are a constant stream of calls going through there. I'll change it tonight. The only reason we set it to Brazil is because the choice of requencies are much more.

Nutcracker

Nope

still nothing. I can set it to Turbo mode.

and my bad... frequencies are 200mhz apart

you can see in the print screen what my options are.

Nutcracker

I have 2 X Nstreme 2 links between different buildings

The frequencies are 300mhz apart and the grids are also far apart(+/-1meter each)

Nutcracker

I have actually found that with the older versions of RouterOS (2.9.38), you can't set the radio's to Turbo. I am busy upgrading the RouterOS now to 2.9.44

Hope this fixes it

Nutcracker

I have recently installed 2 Nstreme 2 Dual links for one of our clients that are going to be pushing a lot of VOIP traffic through it. Before I started utilizing the link I did a bandwidth test and was :shock: shocked :shock: when I only got 15Mbps tx and rx. As far as I can gather from other posts,...

Search found 66 matches