Never thought that could be the cause!!.

i will try to update to 6.47 this weekend and monitor the results

thanks for the information!.

Will this fix the high battery issue with mobile devices? this started with the 6.47 versions, up to 6.46 the battery drain was normal on phones and tablets, it went up to 4x with the 6.47 versions. I see no improvement here. My Oneplus drains like crazy, but GF's Nokia doesn't seem to have problem...

*) cap - fixed L2MTU path discovery; *) wireless - fixed incorrect wireless capability information in association response frames; Will this fix the high battery issue with mobile devices? this started with the 6.47 versions, up to 6.46 the battery drain was normal on phones and tablets, it went up...

I use this rules to see my devices IP in pi-hole, (kind of, i only have to interpret 10 as 192), my pi-hole ip is 192.168.0.8, i use my router ip for dns in dhcp, 192.168.0.1, but the router catches all the dns traffic and send it to my pi-hole, and mascarade it so i can see in pi-hole the device ip...

I also use TorGuard vpn services for some devices in my house and for me works ok, here's my config regarding Torguard VPN, hope it helps /ip ipsec proposal set [ find default=yes ] enc-algorithms=aes-128-cbc pfs-group=none /ppp profile add change-tcp-mss=yes name=profileTorguard on-down=":do {...

Hi, im revisiting this theme, now im testing with 6.47.3, and the same behavior, high battery consumption, this week my average phone drain with 6.45.9 was 0.3%/h, last friday i decided to upgrade to 6.47.3, and the drainage was now al 3.3%/h, with the same router, settings, placement, etc etc. only...

The point with the script is to send all information using syslog. If you selet that log should be sent to disk, it will also go there. As far as I know, you can not split the logg saying that some should go to disk, some to memory and some to disk. I still do not understand why you need logs to di...

the files are showing on my disk because i have a rule that send the logs there You have selected to write the logs to your disk so it will write it there. I do not understand the problem. Just remove the log to the disk? the thing is the logs are filled with info from the splunk script, what i was...

is there a way to make the script output not be reflected on the memory or disk log?, only send it to the remote splunk server? I do not see those files on my disk. Can you download one of them to your PC and list whats in the file? the files are showing on my disk because i have a rule that send t...

thanks for the hard work is there a way to make the script output not be reflected on the memory or disk log?, only send it to the remote splunk server? were having some isp issues and i need to use the log a lot, but its filled with the splunk script output, i did put a usb memory and sent the log ...

I just noticied this: Splunk for MikroTik updated to v3.1 Mayor changes is the CAPsMAN view If you like to use the CAPsMAN, update script to 4.1 and add capsmann script fond in section 2f first post: and this code on the script: # Test if CAPsMANN is installed, if yes, run it # ---------------------...

Script updated to 4.1 to get CAPsMANN inforamtion.

Read section 2f) if you like to use CAPsMANN function.

Where is version 4.1??, i only see ver 4.0 on the OP.

I'm not sure which WAN is which and if the server is part of list, but this should do the trick (before other rules):

Code: Select all

/ip firewall mangle
add action=accept chain=prerouting dst-address=10.168.0.0/24 in-interface=bridgeLAN

Thanks, that worked!!

i use some mangle rules to be able to redirect traffic to my 2nd wan, only need to put the ip in a list and those goes to the 2nd wan, here are my mangle and route rules /ip route add check-gateway=ping distance=1 gateway=pppoe-Telnor routing-mark=TelnorWAN add check-gateway=ping distance=2 gateway=...

Route to virtual addresses (10.168.88.0/24 or whatever you used) on web server machine must point to router where you're doing this. You don't need to add anything, it's covered by default route, if it points to this router. Basically it would be a problem only if server had route to this subnet go...

You can't have real source address, that's impossible. It's what you have without hairpin and it doesn't work. Hairpin makes it work, but you lose the real source address. It's a tradeoff, you can have one or another... ... or something in between. You can map original subnet to some virtual subnet...

Update

Yesterday i updated my work router, a RB951UI to 6.47 and the same issue, now on all of our office phones, so the issue is not only with capsman, hap ac2 or cap ac. will revert to 6.46.6 and keep testing

Why do you think ROS is the cause for battery drain? This can be coincidence only. Please do not forget that Google pushes several updates to your phone which can cause higher consumption and usually are fixed by new updates. i dont think is a coincidence because this was the same behavior as soon ...

On thing may create problem for you. You have added lan IP on an interface and not an bridge. You are not the first and for sure 100% not the last one to make this error. DHCP server is correctly configured on the bridge, so why did you miss the main IP? I guess you have upgraded from an older vers...

Multicast-helper causes higher battery usage. If battery life is a concern you might want to disable it.

I did try disabling it and it was the same high battery consumption. Also i don't have that problem with 6.46.6. So it's still a 6.47 problem.

Sent from my SM-G988B using Tapatalk

i had some wireless problems with this version, my battery powered wireless devices (phones, tablets, ipad) started to drain battery fast, i had to rollback to 6.46.6 to fix that. my setup is a hap ac2 as capsman manager/cap and a cap ac as a cap, here's more info https://forum.mikrotik.com/viewtopi...

Hi, my current setup is a hap ac2 as a capsman manager and cap and another router, a cap ac as another cap, i had both at 6.46.6, but this friday i updated them to 6.47 and stated to notice that my battery powered wireless devices, phones, tablets, stated to drain battery faster on standby, (on my s...

i have made others tests, and when a device dissapears form the google home app, for example, a google mini is wireless connected to the cap and the phone to the wireless on the capsman, i can't ping from the phone to the google mini, but from my pc, conected via wire to the capsman, i can ping the ...

Hi,
It worked so far, but not now after an update --> v6.46.5 RB760iGS
This is bug, or can i check some setting?

Thx,
Tamas

same here, i can't see in the registration table the ACL comments, hap ac2 6.46.5

May I suggest moving all those Google devices to the 2.4 GHz network and see if they manifest the same similar problem? After all, I think that 2.4 GHz offers enough bandwidth for what they need/offer and I've seen many cases of Google Home devices having issues with 5GHz networks. Will try that ro...

I now have RB450x4 as main router and hap ac2 and cap ac as APs. Before RB450x4 I had hex s as main router. I can get around 200mbps on APs whit capsman forwarding and 80mhz channel width. I have issues whit local forwarding also, so I don't use it. Have you played whit channels? Turn off old bands...

Hi, this is my first ask on this forum so please be kind currently i have a hAP AC2 as my main router and my 1st AP (5G only), with 2 WANs, one cable isp and one dsl isp as a failover, a cAP AC as 2nd AP (2.4G and 5G), administered with capsman, that power my home internet, there i have 5 wired cpus...